CISCO MODULE
BIOS Ver: 5.47
Switch G5
RC Revision:  02.03.00

Memory Information:
 MRC Revision:00.50.00
 Total  DRAM: 32768 MB
 Memory TOLM: 80000000
 PCIE   BASE: 80000000     	Size : 10000000
 PCI32  BASE: 90000000     	Limit: FBFFFFFF
 PCI64  BASE: 80000000000     	Limit: 83FFFFFFFFF
 UC    START: 80000000000     	End  : 84000000000
ME Operational Firmware Version: 06:3.0.3.214

DIMM Information:
 Clock Speed: 1067MHz
 Socket: 0x0 Channel: 0x0 Number: 0x0 Presence: Yes Size: 32GB
 Socket: 0x0 Channel: 0x0 Number: 0x1 Presence: No
 Socket: 0x0 Channel: 0x1 Number: 0x0 Presence: No
 Socket: 0x0 Channel: 0x1 Number: 0x1 Presence: No

Detected CISCO IOFPGA
Booting from Primary BIOS
 Code Signing Results: 0x0
 Booting from Upgrade FPGA
IOFPGA Subsystem Vendor ID 0x1172
 FPGA Revision         : 0x1000022
 FPGA ID               : 0x1564687
 FPGA Date             : 0x20200410
 Power Debug Register1  : 0x0
 Power Debug Register2  : 0x9002f
 Reset Cause Register  : 0x1
 Boot Ctrl Register    : 0xe0ff
 FPGA Update Status    : 0x20

Detected CISCO MIFPGA
MIFPGA Subsystem Vendor ID 0x1172
 MIFPGA Version        : 0x10
 MIFPGA Date           : 0x20170515
 MIFPGA Update Status  : 0x20
 MIFPGA ID             : 0x1555231

Board Type: SUMPIN

Bootable Disk is detected. Device Name: Micron_5300_MTFDDAV240TDS
Version 2.18.1260. Copyright (C) 2022 American Megatrends, Inc.
FPGA SPI Flash Winbond W25Q128BV
Board type  4
IOFPGA @ 0xd8000000
SLOT_ID @ 0xf
Set fan speed to 60%
Initializing fan controller...
Standalone chassis
check_bootmode: grub: Continue grub
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
 Filesystem type is ext2fs, partition type 0x83


Security Lock
Booting bootflash:/nxos64-cs.10.3.1.5.F.bin.upg
Trying diskboot
 Filesystem type is ext2fs, partition type 0x83
Image valid
OS Image Key Type: Development KEY


Image Signature verification was Successful.

Boot Time: 1/5/2023  23:3:45

Security Lock
mount: overlay mounted on /newroot/usr.
Installing klm_card_index
done
Setting nativeboot
Linking n9k flash devices
creating flash devices BOOT_DEV= sda

INIT: version 2.88 booting
Installing ata_piix module ... Installing kheaders module ... done.
Executing /etc/rc.d/rcS.d//S06exablaze start
Executing /etc/rc.d/rcS.d//S06exablaze start
Unsquashing rootfs ...
Total size needed in bootflash is 153688
check bootflash : OK
Total size needed in bootflash is 54456
check bootflash : OK
done.
Enabling 8250 serial driver spurious INTs workaround
Installing isan procfs ... done.
Installing SSE module with card index 21135 ... done.
Creating SSE device node 243 ... done.
Inserting kernel_services module ... done.
Making kernel_services character devices
is_lxc: is_titan_eor: is_stby: suffix: klm_ftrace: /isanboot/lib/modules/klm_ftrace.o
Installing ftrace in non-lxc mode done
cgroups initialized
Not Micron SSD...
Loading I2C driver ... done.
Installing CCTRL driver for card_type 54 without NEED_GEM ... done.
Loading IGB driver ...
Checking all filesystems.done.

Installing SPROM driver ... 21135 Extracting rpms from image...
IS_N9K done.
Installing pfmsvcs module ...done.
Installing nvram module ... done.
Installing if_index module with port mode 6 ... done.
Installing fcfwd
Installing RNI lcnd ... done
Running mode is N9K-ToR ...done
Installing LC netdev ... done
Installing psdev module ... done.
Installing veobc module ... done.
Clean up previous pcap files present in tmp directory
Checking SR card
Card Index is 21135
Inserting eMMC module ...
Inserting OBFL module ... 13.49: eMMC Device found.
13.49: card has mmc
done.
13.50: Making OBFL character devices for mmc
mounting plog for N9k!
13.54: mounting plog for N9k!
13.55: Done..mounting plog for N9k!
Mounting OBFL for eMMC
Attach blkoops
15.01: Before mounting blkoops
15.02: After mounting blkoops
15.02: recreate_mmcftrace_rr_device
/
Calling install_tor for TOR
copying common rpm to ftp
tune2fs 1.45.6 (20-Mar-2020)
Setting reserved blocks percentage to 0% (0 blocks)
update-alternatives: Linking /usr/bin/unshare to /usr/bin/unshare.util-linux
 Removing any system startup links for cgroups-init ...
 Adding system startup for /etc/init.d/cgroups-init.
Loading system software
Running groupadd commands...
NOTE: docker-ce: Performing groupadd with [ -r docker]
update-alternatives: Linking /bin/vi to /usr/bin/vim.tiny
update-alternatives: Linking /usr/bin/vim to /usr/bin/vim.tiny
/mnt/pstore/stats_ssd/.ssd_overall_data file exist !!
moving /mnt/pstore/stats_ssd/.ssd_overall_data to /mnt/pstore/stats_ssd/.ssd_lastboot_data
Starting crond: OK
Starting rpcbind daemon...done.
creating NFS state directory: done
starting 8 nfsd kernel threads: done
starting mountd: done
starting statd: done
exit code: 1
Saving image for img-sync ...
Installing local RPMS
Not Micron SSD...
Not Micron SSD...
Stopping crond: OK
Starting crond: OK
Patch Repository Setup completed successfully
Creating /dev/mcelog
Starting mcelog daemon
N9K CPA setup done
N9K TOR LC CPA s
INIT: Entering runlevel: 3
rm: cannot remove '/isan/etc/sysmgr.d/s1hal.conf': No such file or directory
rm: cannot remove '/isan/etc/cli/mvdxn.cli__': No such file or directory
Running S93thirdparty-script...
vlc_card_index 0
S26: sw_id 21135 vp 0
S26 B: sw_id 21135, Moving libcrdcfgdata_tah_tor.so to libcrdcfgdata.so
S26 5: Before Move : TOR HW  :
S26 6: After Move : Populating conf files for hybrid sysmgr ...
Starting hybrid sysmgr ...
Starting lem_drv driver
done
Netbroker support IS present in the kernel.
done
Skipping EMON in TOR ...
Executing Prune clis.
Removing exusd cli files if it is not exbl_card in prune_clis
ethernet switching mode Thu Jan  5 23:04:31 UTC 2023
prepare span CLI
Jan  5 23:04:39 %PLATFORM-5-PS_STATUS PowerSupply 1 current-status is PS_SHUT
Jan  5 23:04:39 %PLATFORM-2-PS_FAIL Power supply 1 failed or shut down (Serial number LIT2540CHN9)
Jan  5 23:04:39 %PLATFORM-5-PS_FOUND Power supply 2 found (Serial number LIT2540CGJ6)
Jan  5 23:04:39 %PLATFORM-2-PS_OK Power supply 2 ok (Serial number LIT2540CGJ6)
Jan  5 23:04:39 %PLATFORM-5-PS_STATUS PowerSupply 2 current-status is PS_OK
Jan  5 23:04:39 %PLATFORM-2-PS_FANOK Fan in Power supply 2 ok
Jan  5 23:04:39 %PLATFORM-4-PFM_PS_RED_MODE_CHG Power redundancy configured mode changed to ps-redundant
Jan  5 23:04:39 %PLATFORM-2-PS_ABSENT Power supply 1 is absent/shutdown, ps-redundancy might be affected
Jan  5 23:04:39 %PLATFORM-2-PS_RED_MODE_CHG Power supply operational redundancy mode changed to non-redundant
Jan  5 23:04:39 %PLATFORM-5-FAN_DETECT Fan module 1 (Serial number ) Fan1(sys_fan1) detected
Jan  5 23:04:39 %PLATFORM-5-FAN_STATUS Fan module 1 (Serial number ) Fan1(sys_fan1) current-status is FAN_OK
Jan  5 23:04:39 %PLATFORM-2-FANMOD_FAN_OK Fan module 1 (Fan1(sys_fan1) fan) ok
Jan  5 23:04:39 %PLATFORM-5-FAN_DETECT Fan module 2 (Serial number ) Fan2(sys_fan2) detected
Jan  5 23:04:39 %PLATFORM-5-FAN_STATUS Fan module 2 (Serial number ) Fan2(sys_fan2) current-status is FAN_OK
Jan  5 23:04:39 %PLATFORM-2-FANMOD_FAN_OK Fan module 2 (Fan2(sys_fan2) fan) ok
Jan  5 23:04:39 %PLATFORM-5-FAN_DETECT Fan module 3 (Serial number ) Fan3(sys_fan3) detected
Jan  5 23:04:39 %PLATFORM-5-FAN_STATUS Fan module 3 (Serial number ) Fan3(sys_fan3) current-status is FAN_OK
Jan  5 23:04:39 %PLATFORM-2-FANMOD_FAN_OK Fan module 3 (Fan3(sys_fan3) fan) ok
Jan  5 23:04:39 %PLATFORM-5-FAN_DETECT Fan module 4 (Serial number ) Fan4(sys_fan4) detected
Jan  5 23:04:39 %PLATFORM-5-FAN_STATUS Fan module 4 (Serial number ) Fan4(sys_fan4) current-status is FAN_OK
Jan  5 23:04:39 %PLATFORM-2-FANMOD_FAN_OK Fan module 4 (Fan4(sys_fan4) fan) ok

User Access Verification
