# -*- coding: utf-8 -*-
# File generated from our OpenAPI spec
from stripe._createable_api_resource import CreateableAPIResource
from stripe._expandable_field import ExpandableField
from stripe._list_object import ListObject
from stripe._listable_api_resource import ListableAPIResource
from stripe._request_options import RequestOptions
from stripe._stripe_object import StripeObject
from stripe._updateable_api_resource import UpdateableAPIResource
from stripe._util import class_method_variant, sanitize_id
from typing import Any, ClassVar, Dict, List, Optional, Union, cast, overload
from typing_extensions import (
    Literal,
    NotRequired,
    TypedDict,
    Unpack,
    TYPE_CHECKING,
)

if TYPE_CHECKING:
    from stripe._account import Account
    from stripe._application import Application
    from stripe._bank_account import BankAccount
    from stripe._card import Card as CardResource
    from stripe._customer import Customer
    from stripe._mandate import Mandate
    from stripe._payment_intent import PaymentIntent
    from stripe._payment_method import PaymentMethod
    from stripe._setup_attempt import SetupAttempt
    from stripe._source import Source


class SetupIntent(
    CreateableAPIResource["SetupIntent"],
    ListableAPIResource["SetupIntent"],
    UpdateableAPIResource["SetupIntent"],
):
    """
    A SetupIntent guides you through the process of setting up and saving a customer's payment credentials for future payments.
    For example, you can use a SetupIntent to set up and save your customer's card without immediately collecting a payment.
    Later, you can use [PaymentIntents](https://stripe.com/docs/api#payment_intents) to drive the payment flow.

    Create a SetupIntent when you're ready to collect your customer's payment credentials.
    Don't maintain long-lived, unconfirmed SetupIntents because they might not be valid.
    The SetupIntent transitions through multiple [statuses](https://docs.stripe.com/payments/intents#intent-statuses) as it guides
    you through the setup process.

    Successful SetupIntents result in payment credentials that are optimized for future payments.
    For example, cardholders in [certain regions](https://stripe.com/guides/strong-customer-authentication) might need to be run through
    [Strong Customer Authentication](https://docs.stripe.com/strong-customer-authentication) during payment method collection
    to streamline later [off-session payments](https://docs.stripe.com/payments/setup-intents).
    If you use the SetupIntent with a [Customer](https://stripe.com/docs/api#setup_intent_object-customer),
    it automatically attaches the resulting payment method to that Customer after successful setup.
    We recommend using SetupIntents or [setup_future_usage](https://stripe.com/docs/api#payment_intent_object-setup_future_usage) on
    PaymentIntents to save payment methods to prevent saving invalid or unoptimized payment methods.

    By using SetupIntents, you can reduce friction for your customers, even as regulations change over time.

    Related guide: [Setup Intents API](https://docs.stripe.com/payments/setup-intents)
    """

    OBJECT_NAME: ClassVar[Literal["setup_intent"]] = "setup_intent"

    class AutomaticPaymentMethods(StripeObject):
        allow_redirects: Optional[Literal["always", "never"]]
        """
        Controls whether this SetupIntent will accept redirect-based payment methods.

        Redirect-based payment methods may require your customer to be redirected to a payment method's app or site for authentication or additional steps. To [confirm](https://stripe.com/docs/api/setup_intents/confirm) this SetupIntent, you may be required to provide a `return_url` to redirect customers back to your site after they authenticate or complete the setup.
        """
        enabled: Optional[bool]
        """
        Automatically calculates compatible payment methods
        """

    class LastSetupError(StripeObject):
        advice_code: Optional[str]
        """
        For card errors resulting from a card issuer decline, a short string indicating [how to proceed with an error](https://stripe.com/docs/declines#retrying-issuer-declines) if they provide one.
        """
        charge: Optional[str]
        """
        For card errors, the ID of the failed charge.
        """
        code: Optional[
            Literal[
                "account_closed",
                "account_country_invalid_address",
                "account_error_country_change_requires_additional_steps",
                "account_information_mismatch",
                "account_invalid",
                "account_number_invalid",
                "acss_debit_session_incomplete",
                "alipay_upgrade_required",
                "amount_too_large",
                "amount_too_small",
                "api_key_expired",
                "application_fees_not_allowed",
                "authentication_required",
                "balance_insufficient",
                "balance_invalid_parameter",
                "bank_account_bad_routing_numbers",
                "bank_account_declined",
                "bank_account_exists",
                "bank_account_restricted",
                "bank_account_unusable",
                "bank_account_unverified",
                "bank_account_verification_failed",
                "billing_invalid_mandate",
                "bitcoin_upgrade_required",
                "capture_charge_authorization_expired",
                "capture_unauthorized_payment",
                "card_decline_rate_limit_exceeded",
                "card_declined",
                "cardholder_phone_number_required",
                "charge_already_captured",
                "charge_already_refunded",
                "charge_disputed",
                "charge_exceeds_source_limit",
                "charge_exceeds_transaction_limit",
                "charge_expired_for_capture",
                "charge_invalid_parameter",
                "charge_not_refundable",
                "clearing_code_unsupported",
                "country_code_invalid",
                "country_unsupported",
                "coupon_expired",
                "customer_max_payment_methods",
                "customer_max_subscriptions",
                "customer_tax_location_invalid",
                "debit_not_authorized",
                "email_invalid",
                "expired_card",
                "financial_connections_account_inactive",
                "financial_connections_institution_unavailable",
                "financial_connections_no_successful_transaction_refresh",
                "forwarding_api_inactive",
                "forwarding_api_invalid_parameter",
                "forwarding_api_retryable_upstream_error",
                "forwarding_api_upstream_connection_error",
                "forwarding_api_upstream_connection_timeout",
                "forwarding_api_upstream_error",
                "idempotency_key_in_use",
                "incorrect_address",
                "incorrect_cvc",
                "incorrect_number",
                "incorrect_zip",
                "instant_payouts_config_disabled",
                "instant_payouts_currency_disabled",
                "instant_payouts_limit_exceeded",
                "instant_payouts_unsupported",
                "insufficient_funds",
                "intent_invalid_state",
                "intent_verification_method_missing",
                "invalid_card_type",
                "invalid_characters",
                "invalid_charge_amount",
                "invalid_cvc",
                "invalid_expiry_month",
                "invalid_expiry_year",
                "invalid_mandate_reference_prefix_format",
                "invalid_number",
                "invalid_source_usage",
                "invalid_tax_location",
                "invoice_no_customer_line_items",
                "invoice_no_payment_method_types",
                "invoice_no_subscription_line_items",
                "invoice_not_editable",
                "invoice_on_behalf_of_not_editable",
                "invoice_payment_intent_requires_action",
                "invoice_upcoming_none",
                "livemode_mismatch",
                "lock_timeout",
                "missing",
                "no_account",
                "not_allowed_on_standard_account",
                "out_of_inventory",
                "ownership_declaration_not_allowed",
                "parameter_invalid_empty",
                "parameter_invalid_integer",
                "parameter_invalid_string_blank",
                "parameter_invalid_string_empty",
                "parameter_missing",
                "parameter_unknown",
                "parameters_exclusive",
                "payment_intent_action_required",
                "payment_intent_authentication_failure",
                "payment_intent_incompatible_payment_method",
                "payment_intent_invalid_parameter",
                "payment_intent_konbini_rejected_confirmation_number",
                "payment_intent_mandate_invalid",
                "payment_intent_payment_attempt_expired",
                "payment_intent_payment_attempt_failed",
                "payment_intent_unexpected_state",
                "payment_method_bank_account_already_verified",
                "payment_method_bank_account_blocked",
                "payment_method_billing_details_address_missing",
                "payment_method_configuration_failures",
                "payment_method_currency_mismatch",
                "payment_method_customer_decline",
                "payment_method_invalid_parameter",
                "payment_method_invalid_parameter_testmode",
                "payment_method_microdeposit_failed",
                "payment_method_microdeposit_verification_amounts_invalid",
                "payment_method_microdeposit_verification_amounts_mismatch",
                "payment_method_microdeposit_verification_attempts_exceeded",
                "payment_method_microdeposit_verification_descriptor_code_mismatch",
                "payment_method_microdeposit_verification_timeout",
                "payment_method_not_available",
                "payment_method_provider_decline",
                "payment_method_provider_timeout",
                "payment_method_unactivated",
                "payment_method_unexpected_state",
                "payment_method_unsupported_type",
                "payout_reconciliation_not_ready",
                "payouts_limit_exceeded",
                "payouts_not_allowed",
                "platform_account_required",
                "platform_api_key_expired",
                "postal_code_invalid",
                "processing_error",
                "product_inactive",
                "progressive_onboarding_limit_exceeded",
                "rate_limit",
                "refer_to_customer",
                "refund_disputed_payment",
                "resource_already_exists",
                "resource_missing",
                "return_intent_already_processed",
                "routing_number_invalid",
                "secret_key_required",
                "sensitive_data_access_expired",
                "sepa_unsupported_account",
                "setup_attempt_failed",
                "setup_intent_authentication_failure",
                "setup_intent_invalid_parameter",
                "setup_intent_mandate_invalid",
                "setup_intent_mobile_wallet_unsupported",
                "setup_intent_setup_attempt_expired",
                "setup_intent_unexpected_state",
                "shipping_address_invalid",
                "shipping_calculation_failed",
                "sku_inactive",
                "state_unsupported",
                "status_transition_invalid",
                "stripe_tax_inactive",
                "tax_id_invalid",
                "tax_id_prohibited",
                "taxes_calculation_failed",
                "terminal_location_country_unsupported",
                "terminal_reader_busy",
                "terminal_reader_collected_data_invalid",
                "terminal_reader_hardware_fault",
                "terminal_reader_invalid_location_for_activation",
                "terminal_reader_invalid_location_for_payment",
                "terminal_reader_offline",
                "terminal_reader_timeout",
                "testmode_charges_only",
                "tls_version_unsupported",
                "token_already_used",
                "token_card_network_invalid",
                "token_in_use",
                "transfer_source_balance_parameters_mismatch",
                "transfers_not_allowed",
                "url_invalid",
                "v2_account_disconnection_unsupported",
                "v2_account_missing_configuration",
            ]
        ]
        """
        For some errors that could be handled programmatically, a short string indicating the [error code](https://stripe.com/docs/error-codes) reported.
        """
        decline_code: Optional[str]
        """
        For card errors resulting from a card issuer decline, a short string indicating the [card issuer's reason for the decline](https://stripe.com/docs/declines#issuer-declines) if they provide one.
        """
        doc_url: Optional[str]
        """
        A URL to more information about the [error code](https://stripe.com/docs/error-codes) reported.
        """
        message: Optional[str]
        """
        A human-readable message providing more details about the error. For card errors, these messages can be shown to your users.
        """
        network_advice_code: Optional[str]
        """
        For card errors resulting from a card issuer decline, a 2 digit code which indicates the advice given to merchant by the card network on how to proceed with an error.
        """
        network_decline_code: Optional[str]
        """
        For card errors resulting from a card issuer decline, a brand specific 2, 3, or 4 digit code which indicates the reason the authorization failed.
        """
        param: Optional[str]
        """
        If the error is parameter-specific, the parameter related to the error. For example, you can use this to display a message near the correct form field.
        """
        payment_intent: Optional["PaymentIntent"]
        """
        A PaymentIntent guides you through the process of collecting a payment from your customer.
        We recommend that you create exactly one PaymentIntent for each order or
        customer session in your system. You can reference the PaymentIntent later to
        see the history of payment attempts for a particular session.

        A PaymentIntent transitions through
        [multiple statuses](https://stripe.com/docs/payments/intents#intent-statuses)
        throughout its lifetime as it interfaces with Stripe.js to perform
        authentication flows and ultimately creates at most one successful charge.

        Related guide: [Payment Intents API](https://stripe.com/docs/payments/payment-intents)
        """
        payment_method: Optional["PaymentMethod"]
        """
        PaymentMethod objects represent your customer's payment instruments.
        You can use them with [PaymentIntents](https://stripe.com/docs/payments/payment-intents) to collect payments or save them to
        Customer objects to store instrument details for future payments.

        Related guides: [Payment Methods](https://stripe.com/docs/payments/payment-methods) and [More Payment Scenarios](https://stripe.com/docs/payments/more-payment-scenarios).
        """
        payment_method_type: Optional[str]
        """
        If the error is specific to the type of payment method, the payment method type that had a problem. This field is only populated for invoice-related errors.
        """
        request_log_url: Optional[str]
        """
        A URL to the request log entry in your dashboard.
        """
        setup_intent: Optional["SetupIntent"]
        """
        A SetupIntent guides you through the process of setting up and saving a customer's payment credentials for future payments.
        For example, you can use a SetupIntent to set up and save your customer's card without immediately collecting a payment.
        Later, you can use [PaymentIntents](https://stripe.com/docs/api#payment_intents) to drive the payment flow.

        Create a SetupIntent when you're ready to collect your customer's payment credentials.
        Don't maintain long-lived, unconfirmed SetupIntents because they might not be valid.
        The SetupIntent transitions through multiple [statuses](https://docs.stripe.com/payments/intents#intent-statuses) as it guides
        you through the setup process.

        Successful SetupIntents result in payment credentials that are optimized for future payments.
        For example, cardholders in [certain regions](https://stripe.com/guides/strong-customer-authentication) might need to be run through
        [Strong Customer Authentication](https://docs.stripe.com/strong-customer-authentication) during payment method collection
        to streamline later [off-session payments](https://docs.stripe.com/payments/setup-intents).
        If you use the SetupIntent with a [Customer](https://stripe.com/docs/api#setup_intent_object-customer),
        it automatically attaches the resulting payment method to that Customer after successful setup.
        We recommend using SetupIntents or [setup_future_usage](https://stripe.com/docs/api#payment_intent_object-setup_future_usage) on
        PaymentIntents to save payment methods to prevent saving invalid or unoptimized payment methods.

        By using SetupIntents, you can reduce friction for your customers, even as regulations change over time.

        Related guide: [Setup Intents API](https://docs.stripe.com/payments/setup-intents)
        """
        source: Optional[
            Union["Account", "BankAccount", "CardResource", "Source"]
        ]
        type: Literal[
            "api_error",
            "card_error",
            "idempotency_error",
            "invalid_request_error",
        ]
        """
        The type of error returned. One of `api_error`, `card_error`, `idempotency_error`, or `invalid_request_error`
        """

    class NextAction(StripeObject):
        class CashappHandleRedirectOrDisplayQrCode(StripeObject):
            class QrCode(StripeObject):
                expires_at: int
                """
                The date (unix timestamp) when the QR code expires.
                """
                image_url_png: str
                """
                The image_url_png string used to render QR code
                """
                image_url_svg: str
                """
                The image_url_svg string used to render QR code
                """

            hosted_instructions_url: str
            """
            The URL to the hosted Cash App Pay instructions page, which allows customers to view the QR code, and supports QR code refreshing on expiration.
            """
            mobile_auth_url: str
            """
            The url for mobile redirect based auth
            """
            qr_code: QrCode
            _inner_class_types = {"qr_code": QrCode}

        class RedirectToUrl(StripeObject):
            return_url: Optional[str]
            """
            If the customer does not exit their browser while authenticating, they will be redirected to this specified URL after completion.
            """
            url: Optional[str]
            """
            The URL you must redirect your customer to in order to authenticate.
            """

        class VerifyWithMicrodeposits(StripeObject):
            arrival_date: int
            """
            The timestamp when the microdeposits are expected to land.
            """
            hosted_verification_url: str
            """
            The URL for the hosted verification page, which allows customers to verify their bank account.
            """
            microdeposit_type: Optional[Literal["amounts", "descriptor_code"]]
            """
            The type of the microdeposit sent to the customer. Used to distinguish between different verification methods.
            """

        cashapp_handle_redirect_or_display_qr_code: Optional[
            CashappHandleRedirectOrDisplayQrCode
        ]
        redirect_to_url: Optional[RedirectToUrl]
        type: str
        """
        Type of the next action to perform. Refer to the other child attributes under `next_action` for available values. Examples include: `redirect_to_url`, `use_stripe_sdk`, `alipay_handle_redirect`, `oxxo_display_details`, or `verify_with_microdeposits`.
        """
        use_stripe_sdk: Optional[Dict[str, Any]]
        """
        When confirming a SetupIntent with Stripe.js, Stripe.js depends on the contents of this dictionary to invoke authentication flows. The shape of the contents is subject to change and is only intended to be used by Stripe.js.
        """
        verify_with_microdeposits: Optional[VerifyWithMicrodeposits]
        _inner_class_types = {
            "cashapp_handle_redirect_or_display_qr_code": CashappHandleRedirectOrDisplayQrCode,
            "redirect_to_url": RedirectToUrl,
            "verify_with_microdeposits": VerifyWithMicrodeposits,
        }

    class PaymentMethodConfigurationDetails(StripeObject):
        id: str
        """
        ID of the payment method configuration used.
        """
        parent: Optional[str]
        """
        ID of the parent payment method configuration used.
        """

    class PaymentMethodOptions(StripeObject):
        class AcssDebit(StripeObject):
            class MandateOptions(StripeObject):
                custom_mandate_url: Optional[str]
                """
                A URL for custom mandate text
                """
                default_for: Optional[List[Literal["invoice", "subscription"]]]
                """
                List of Stripe products where this mandate can be selected automatically.
                """
                interval_description: Optional[str]
                """
                Description of the interval. Only required if the 'payment_schedule' parameter is 'interval' or 'combined'.
                """
                payment_schedule: Optional[
                    Literal["combined", "interval", "sporadic"]
                ]
                """
                Payment schedule for the mandate.
                """
                transaction_type: Optional[Literal["business", "personal"]]
                """
                Transaction type of the mandate.
                """

            currency: Optional[Literal["cad", "usd"]]
            """
            Currency supported by the bank account
            """
            mandate_options: Optional[MandateOptions]
            verification_method: Optional[
                Literal["automatic", "instant", "microdeposits"]
            ]
            """
            Bank account verification method.
            """
            _inner_class_types = {"mandate_options": MandateOptions}

        class AmazonPay(StripeObject):
            pass

        class BacsDebit(StripeObject):
            class MandateOptions(StripeObject):
                reference_prefix: Optional[str]
                """
                Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'DDIC' or 'STRIPE'.
                """

            mandate_options: Optional[MandateOptions]
            _inner_class_types = {"mandate_options": MandateOptions}

        class Card(StripeObject):
            class MandateOptions(StripeObject):
                amount: int
                """
                Amount to be charged for future payments.
                """
                amount_type: Literal["fixed", "maximum"]
                """
                One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
                """
                currency: str
                """
                Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
                """
                description: Optional[str]
                """
                A description of the mandate or subscription that is meant to be displayed to the customer.
                """
                end_date: Optional[int]
                """
                End date of the mandate or subscription. If not provided, the mandate will be active until canceled. If provided, end date should be after start date.
                """
                interval: Literal["day", "month", "sporadic", "week", "year"]
                """
                Specifies payment frequency. One of `day`, `week`, `month`, `year`, or `sporadic`.
                """
                interval_count: Optional[int]
                """
                The number of intervals between payments. For example, `interval=month` and `interval_count=3` indicates one payment every three months. Maximum of one year interval allowed (1 year, 12 months, or 52 weeks). This parameter is optional when `interval=sporadic`.
                """
                reference: str
                """
                Unique identifier for the mandate or subscription.
                """
                start_date: int
                """
                Start date of the mandate or subscription. Start date should not be lesser than yesterday.
                """
                supported_types: Optional[List[Literal["india"]]]
                """
                Specifies the type of mandates supported. Possible values are `india`.
                """

            mandate_options: Optional[MandateOptions]
            """
            Configuration options for setting up an eMandate for cards issued in India.
            """
            network: Optional[
                Literal[
                    "amex",
                    "cartes_bancaires",
                    "diners",
                    "discover",
                    "eftpos_au",
                    "girocard",
                    "interac",
                    "jcb",
                    "link",
                    "mastercard",
                    "unionpay",
                    "unknown",
                    "visa",
                ]
            ]
            """
            Selected network to process this SetupIntent on. Depends on the available networks of the card attached to the setup intent. Can be only set confirm-time.
            """
            request_three_d_secure: Optional[
                Literal["any", "automatic", "challenge"]
            ]
            """
            We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://stripe.com/docs/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. If not provided, this value defaults to `automatic`. Read our guide on [manually requesting 3D Secure](https://stripe.com/docs/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
            """
            _inner_class_types = {"mandate_options": MandateOptions}

        class CardPresent(StripeObject):
            pass

        class Link(StripeObject):
            persistent_token: Optional[str]
            """
            [Deprecated] This is a legacy parameter that no longer has any function.
            """

        class Paypal(StripeObject):
            billing_agreement_id: Optional[str]
            """
            The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
            """
            currency: Optional[str]
            """
            Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
            """
            subsellers: Optional[List[str]]
            """
            The Stripe connected account IDs of the sellers on the platform for this transaction (optional). Only allowed when [separate charges and transfers](https://stripe.com/docs/connect/separate-charges-and-transfers) are used.
            """

        class Payto(StripeObject):
            class MandateOptions(StripeObject):
                amount: Optional[int]
                """
                Amount that will be collected. It is required when `amount_type` is `fixed`.
                """
                amount_type: Optional[Literal["fixed", "maximum"]]
                """
                The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively.
                """
                end_date: Optional[str]
                """
                Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
                """
                payment_schedule: Optional[
                    Literal[
                        "adhoc",
                        "annual",
                        "daily",
                        "fortnightly",
                        "monthly",
                        "quarterly",
                        "semi_annual",
                        "weekly",
                    ]
                ]
                """
                The periodicity at which payments will be collected.
                """
                payments_per_period: Optional[int]
                """
                The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
                """
                purpose: Optional[
                    Literal[
                        "dependant_support",
                        "government",
                        "loan",
                        "mortgage",
                        "other",
                        "pension",
                        "personal",
                        "retail",
                        "salary",
                        "tax",
                        "utility",
                    ]
                ]
                """
                The purpose for which payments are made. Defaults to retail.
                """
                start_date: Optional[str]
                """
                Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
                """

            mandate_options: Optional[MandateOptions]
            _inner_class_types = {"mandate_options": MandateOptions}

        class SepaDebit(StripeObject):
            class MandateOptions(StripeObject):
                reference_prefix: Optional[str]
                """
                Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'STRIPE'.
                """

            mandate_options: Optional[MandateOptions]
            _inner_class_types = {"mandate_options": MandateOptions}

        class UsBankAccount(StripeObject):
            class FinancialConnections(StripeObject):
                class Filters(StripeObject):
                    account_subcategories: Optional[
                        List[Literal["checking", "savings"]]
                    ]
                    """
                    The account subcategories to use to filter for possible accounts to link. Valid subcategories are `checking` and `savings`.
                    """
                    institution: Optional[str]
                    """
                    The institution to use to filter for possible accounts to link.
                    """

                class ManualEntry(StripeObject):
                    mode: Optional[Literal["automatic", "custom"]]
                    """
                    Settings for configuring manual entry of account details.
                    """

                filters: Optional[Filters]
                manual_entry: Optional[ManualEntry]
                permissions: Optional[
                    List[
                        Literal[
                            "balances",
                            "ownership",
                            "payment_method",
                            "transactions",
                        ]
                    ]
                ]
                """
                The list of permissions to request. The `payment_method` permission must be included.
                """
                prefetch: Optional[
                    List[
                        Literal[
                            "balances",
                            "inferred_balances",
                            "ownership",
                            "transactions",
                        ]
                    ]
                ]
                """
                Data features requested to be retrieved upon account creation.
                """
                return_url: Optional[str]
                """
                For webview integrations only. Upon completing OAuth login in the native browser, the user will be redirected to this URL to return to your app.
                """
                _inner_class_types = {
                    "filters": Filters,
                    "manual_entry": ManualEntry,
                }

            class MandateOptions(StripeObject):
                collection_method: Optional[Literal["paper"]]
                """
                Mandate collection method
                """

            financial_connections: Optional[FinancialConnections]
            mandate_options: Optional[MandateOptions]
            verification_method: Optional[
                Literal["automatic", "instant", "microdeposits"]
            ]
            """
            Bank account verification method.
            """
            _inner_class_types = {
                "financial_connections": FinancialConnections,
                "mandate_options": MandateOptions,
            }

        acss_debit: Optional[AcssDebit]
        amazon_pay: Optional[AmazonPay]
        bacs_debit: Optional[BacsDebit]
        card: Optional[Card]
        card_present: Optional[CardPresent]
        link: Optional[Link]
        paypal: Optional[Paypal]
        payto: Optional[Payto]
        sepa_debit: Optional[SepaDebit]
        us_bank_account: Optional[UsBankAccount]
        _inner_class_types = {
            "acss_debit": AcssDebit,
            "amazon_pay": AmazonPay,
            "bacs_debit": BacsDebit,
            "card": Card,
            "card_present": CardPresent,
            "link": Link,
            "paypal": Paypal,
            "payto": Payto,
            "sepa_debit": SepaDebit,
            "us_bank_account": UsBankAccount,
        }

    class CancelParams(RequestOptions):
        cancellation_reason: NotRequired[
            Literal["abandoned", "duplicate", "requested_by_customer"]
        ]
        """
        Reason for canceling this SetupIntent. Possible values are: `abandoned`, `requested_by_customer`, or `duplicate`
        """
        expand: NotRequired[List[str]]
        """
        Specifies which fields in the response should be expanded.
        """

    class ConfirmParams(RequestOptions):
        confirmation_token: NotRequired[str]
        """
        ID of the ConfirmationToken used to confirm this SetupIntent.

        If the provided ConfirmationToken contains properties that are also being provided in this request, such as `payment_method`, then the values in this request will take precedence.
        """
        expand: NotRequired[List[str]]
        """
        Specifies which fields in the response should be expanded.
        """
        mandate_data: NotRequired[
            "Literal['']|SetupIntent.ConfirmParamsMandateData"
        ]
        payment_method: NotRequired[str]
        """
        ID of the payment method (a PaymentMethod, Card, or saved Source object) to attach to this SetupIntent.
        """
        payment_method_data: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodData"
        ]
        """
        When included, this hash creates a PaymentMethod that is set as the [`payment_method`](https://stripe.com/docs/api/setup_intents/object#setup_intent_object-payment_method)
        value in the SetupIntent.
        """
        payment_method_options: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptions"
        ]
        """
        Payment method-specific configuration for this SetupIntent.
        """
        return_url: NotRequired[str]
        """
        The URL to redirect your customer back to after they authenticate on the payment method's app or site.
        If you'd prefer to redirect to a mobile application, you can alternatively supply an application URI scheme.
        This parameter is only used for cards and other redirect-based payment methods.
        """
        use_stripe_sdk: NotRequired[bool]
        """
        Set to `true` when confirming server-side and using Stripe.js, iOS, or Android client-side SDKs to handle the next actions.
        """

    class ConfirmParamsMandateData(TypedDict):
        customer_acceptance: NotRequired[
            "SetupIntent.ConfirmParamsMandateDataCustomerAcceptance"
        ]
        """
        This hash contains details about the customer acceptance of the Mandate.
        """

    class ConfirmParamsMandateDataCustomerAcceptance(TypedDict):
        accepted_at: NotRequired[int]
        """
        The time at which the customer accepted the Mandate.
        """
        offline: NotRequired[
            "SetupIntent.ConfirmParamsMandateDataCustomerAcceptanceOffline"
        ]
        """
        If this is a Mandate accepted offline, this hash contains details about the offline acceptance.
        """
        online: NotRequired[
            "SetupIntent.ConfirmParamsMandateDataCustomerAcceptanceOnline"
        ]
        """
        If this is a Mandate accepted online, this hash contains details about the online acceptance.
        """
        type: Literal["offline", "online"]
        """
        The type of customer acceptance information included with the Mandate. One of `online` or `offline`.
        """

    class ConfirmParamsMandateDataCustomerAcceptanceOffline(TypedDict):
        pass

    class ConfirmParamsMandateDataCustomerAcceptanceOnline(TypedDict):
        ip_address: NotRequired[str]
        """
        The IP address from which the Mandate was accepted by the customer.
        """
        user_agent: NotRequired[str]
        """
        The user agent of the browser from which the Mandate was accepted by the customer.
        """

    class ConfirmParamsPaymentMethodData(TypedDict):
        acss_debit: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataAcssDebit"
        ]
        """
        If this is an `acss_debit` PaymentMethod, this hash contains details about the ACSS Debit payment method.
        """
        affirm: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataAffirm"]
        """
        If this is an `affirm` PaymentMethod, this hash contains details about the Affirm payment method.
        """
        afterpay_clearpay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataAfterpayClearpay"
        ]
        """
        If this is an `AfterpayClearpay` PaymentMethod, this hash contains details about the AfterpayClearpay payment method.
        """
        alipay: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataAlipay"]
        """
        If this is an `Alipay` PaymentMethod, this hash contains details about the Alipay payment method.
        """
        allow_redisplay: NotRequired[
            Literal["always", "limited", "unspecified"]
        ]
        """
        This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to `unspecified`.
        """
        alma: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataAlma"]
        """
        If this is a Alma PaymentMethod, this hash contains details about the Alma payment method.
        """
        amazon_pay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataAmazonPay"
        ]
        """
        If this is a AmazonPay PaymentMethod, this hash contains details about the AmazonPay payment method.
        """
        au_becs_debit: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataAuBecsDebit"
        ]
        """
        If this is an `au_becs_debit` PaymentMethod, this hash contains details about the bank account.
        """
        bacs_debit: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataBacsDebit"
        ]
        """
        If this is a `bacs_debit` PaymentMethod, this hash contains details about the Bacs Direct Debit bank account.
        """
        bancontact: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataBancontact"
        ]
        """
        If this is a `bancontact` PaymentMethod, this hash contains details about the Bancontact payment method.
        """
        billie: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataBillie"]
        """
        If this is a `billie` PaymentMethod, this hash contains details about the Billie payment method.
        """
        billing_details: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataBillingDetails"
        ]
        """
        Billing information associated with the PaymentMethod that may be used or required by particular types of payment methods.
        """
        blik: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataBlik"]
        """
        If this is a `blik` PaymentMethod, this hash contains details about the BLIK payment method.
        """
        boleto: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataBoleto"]
        """
        If this is a `boleto` PaymentMethod, this hash contains details about the Boleto payment method.
        """
        cashapp: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataCashapp"
        ]
        """
        If this is a `cashapp` PaymentMethod, this hash contains details about the Cash App Pay payment method.
        """
        customer_balance: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataCustomerBalance"
        ]
        """
        If this is a `customer_balance` PaymentMethod, this hash contains details about the CustomerBalance payment method.
        """
        eps: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataEps"]
        """
        If this is an `eps` PaymentMethod, this hash contains details about the EPS payment method.
        """
        fpx: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataFpx"]
        """
        If this is an `fpx` PaymentMethod, this hash contains details about the FPX payment method.
        """
        giropay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataGiropay"
        ]
        """
        If this is a `giropay` PaymentMethod, this hash contains details about the Giropay payment method.
        """
        gopay: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataGopay"]
        """
        If this is a Gopay PaymentMethod, this hash contains details about the Gopay payment method.
        """
        grabpay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataGrabpay"
        ]
        """
        If this is a `grabpay` PaymentMethod, this hash contains details about the GrabPay payment method.
        """
        id_bank_transfer: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataIdBankTransfer"
        ]
        """
        If this is an `IdBankTransfer` PaymentMethod, this hash contains details about the IdBankTransfer payment method.
        """
        ideal: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataIdeal"]
        """
        If this is an `ideal` PaymentMethod, this hash contains details about the iDEAL payment method.
        """
        interac_present: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataInteracPresent"
        ]
        """
        If this is an `interac_present` PaymentMethod, this hash contains details about the Interac Present payment method.
        """
        kakao_pay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataKakaoPay"
        ]
        """
        If this is a `kakao_pay` PaymentMethod, this hash contains details about the Kakao Pay payment method.
        """
        klarna: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataKlarna"]
        """
        If this is a `klarna` PaymentMethod, this hash contains details about the Klarna payment method.
        """
        konbini: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataKonbini"
        ]
        """
        If this is a `konbini` PaymentMethod, this hash contains details about the Konbini payment method.
        """
        kr_card: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataKrCard"
        ]
        """
        If this is a `kr_card` PaymentMethod, this hash contains details about the Korean Card payment method.
        """
        link: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataLink"]
        """
        If this is an `Link` PaymentMethod, this hash contains details about the Link payment method.
        """
        mb_way: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataMbWay"]
        """
        If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
        """
        metadata: NotRequired[Dict[str, str]]
        """
        Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
        """
        mobilepay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataMobilepay"
        ]
        """
        If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
        """
        multibanco: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataMultibanco"
        ]
        """
        If this is a `multibanco` PaymentMethod, this hash contains details about the Multibanco payment method.
        """
        naver_pay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataNaverPay"
        ]
        """
        If this is a `naver_pay` PaymentMethod, this hash contains details about the Naver Pay payment method.
        """
        nz_bank_account: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataNzBankAccount"
        ]
        """
        If this is an nz_bank_account PaymentMethod, this hash contains details about the nz_bank_account payment method.
        """
        oxxo: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataOxxo"]
        """
        If this is an `oxxo` PaymentMethod, this hash contains details about the OXXO payment method.
        """
        p24: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataP24"]
        """
        If this is a `p24` PaymentMethod, this hash contains details about the P24 payment method.
        """
        pay_by_bank: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataPayByBank"
        ]
        """
        If this is a `pay_by_bank` PaymentMethod, this hash contains details about the PayByBank payment method.
        """
        payco: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataPayco"]
        """
        If this is a `payco` PaymentMethod, this hash contains details about the PAYCO payment method.
        """
        paynow: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataPaynow"]
        """
        If this is a `paynow` PaymentMethod, this hash contains details about the PayNow payment method.
        """
        paypal: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataPaypal"]
        """
        If this is a `paypal` PaymentMethod, this hash contains details about the PayPal payment method.
        """
        payto: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataPayto"]
        """
        If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
        """
        pix: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataPix"]
        """
        If this is a `pix` PaymentMethod, this hash contains details about the Pix payment method.
        """
        promptpay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataPromptpay"
        ]
        """
        If this is a `promptpay` PaymentMethod, this hash contains details about the PromptPay payment method.
        """
        qris: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataQris"]
        """
        If this is a `qris` PaymentMethod, this hash contains details about the QRIS payment method.
        """
        radar_options: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataRadarOptions"
        ]
        """
        Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information.
        """
        rechnung: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataRechnung"
        ]
        """
        If this is a `rechnung` PaymentMethod, this hash contains details about the Rechnung payment method.
        """
        revolut_pay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataRevolutPay"
        ]
        """
        If this is a `revolut_pay` PaymentMethod, this hash contains details about the Revolut Pay payment method.
        """
        samsung_pay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataSamsungPay"
        ]
        """
        If this is a `samsung_pay` PaymentMethod, this hash contains details about the SamsungPay payment method.
        """
        satispay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataSatispay"
        ]
        """
        If this is a `satispay` PaymentMethod, this hash contains details about the Satispay payment method.
        """
        sepa_debit: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataSepaDebit"
        ]
        """
        If this is a `sepa_debit` PaymentMethod, this hash contains details about the SEPA debit bank account.
        """
        shopeepay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataShopeepay"
        ]
        """
        If this is a Shopeepay PaymentMethod, this hash contains details about the Shopeepay payment method.
        """
        sofort: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataSofort"]
        """
        If this is a `sofort` PaymentMethod, this hash contains details about the SOFORT payment method.
        """
        stripe_balance: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataStripeBalance"
        ]
        """
        This hash contains details about the Stripe balance payment method.
        """
        swish: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataSwish"]
        """
        If this is a `swish` PaymentMethod, this hash contains details about the Swish payment method.
        """
        twint: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataTwint"]
        """
        If this is a TWINT PaymentMethod, this hash contains details about the TWINT payment method.
        """
        type: Literal[
            "acss_debit",
            "affirm",
            "afterpay_clearpay",
            "alipay",
            "alma",
            "amazon_pay",
            "au_becs_debit",
            "bacs_debit",
            "bancontact",
            "billie",
            "blik",
            "boleto",
            "cashapp",
            "customer_balance",
            "eps",
            "fpx",
            "giropay",
            "gopay",
            "grabpay",
            "id_bank_transfer",
            "ideal",
            "kakao_pay",
            "klarna",
            "konbini",
            "kr_card",
            "link",
            "mb_way",
            "mobilepay",
            "multibanco",
            "naver_pay",
            "nz_bank_account",
            "oxxo",
            "p24",
            "pay_by_bank",
            "payco",
            "paynow",
            "paypal",
            "payto",
            "pix",
            "promptpay",
            "qris",
            "rechnung",
            "revolut_pay",
            "samsung_pay",
            "satispay",
            "sepa_debit",
            "shopeepay",
            "sofort",
            "stripe_balance",
            "swish",
            "twint",
            "us_bank_account",
            "wechat_pay",
            "zip",
        ]
        """
        The type of the PaymentMethod. An additional hash is included on the PaymentMethod with a name matching this value. It contains additional information specific to the PaymentMethod type.
        """
        us_bank_account: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataUsBankAccount"
        ]
        """
        If this is an `us_bank_account` PaymentMethod, this hash contains details about the US bank account payment method.
        """
        wechat_pay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodDataWechatPay"
        ]
        """
        If this is an `wechat_pay` PaymentMethod, this hash contains details about the wechat_pay payment method.
        """
        zip: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataZip"]
        """
        If this is a `zip` PaymentMethod, this hash contains details about the Zip payment method.
        """

    class ConfirmParamsPaymentMethodDataAcssDebit(TypedDict):
        account_number: str
        """
        Customer's bank account number.
        """
        institution_number: str
        """
        Institution number of the customer's bank.
        """
        transit_number: str
        """
        Transit number of the customer's bank.
        """

    class ConfirmParamsPaymentMethodDataAffirm(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataAfterpayClearpay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataAlipay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataAlma(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataAmazonPay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataAuBecsDebit(TypedDict):
        account_number: str
        """
        The account number for the bank account.
        """
        bsb_number: str
        """
        Bank-State-Branch number of the bank account.
        """

    class ConfirmParamsPaymentMethodDataBacsDebit(TypedDict):
        account_number: NotRequired[str]
        """
        Account number of the bank account that the funds will be debited from.
        """
        sort_code: NotRequired[str]
        """
        Sort code of the bank account. (e.g., `10-20-30`)
        """

    class ConfirmParamsPaymentMethodDataBancontact(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataBillie(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataBillingDetails(TypedDict):
        address: NotRequired[
            "Literal['']|SetupIntent.ConfirmParamsPaymentMethodDataBillingDetailsAddress"
        ]
        """
        Billing address.
        """
        email: NotRequired["Literal['']|str"]
        """
        Email address.
        """
        name: NotRequired["Literal['']|str"]
        """
        Full name.
        """
        phone: NotRequired["Literal['']|str"]
        """
        Billing phone number (including extension).
        """
        tax_id: NotRequired[str]
        """
        Taxpayer identification number. Used only for transactions between LATAM buyers and non-LATAM sellers.
        """

    class ConfirmParamsPaymentMethodDataBillingDetailsAddress(TypedDict):
        city: NotRequired[str]
        """
        City, district, suburb, town, or village.
        """
        country: NotRequired[str]
        """
        Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
        """
        line1: NotRequired[str]
        """
        Address line 1 (e.g., street, PO Box, or company name).
        """
        line2: NotRequired[str]
        """
        Address line 2 (e.g., apartment, suite, unit, or building).
        """
        postal_code: NotRequired[str]
        """
        ZIP or postal code.
        """
        state: NotRequired[str]
        """
        State, county, province, or region.
        """

    class ConfirmParamsPaymentMethodDataBlik(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataBoleto(TypedDict):
        tax_id: str
        """
        The tax ID of the customer (CPF for individual consumers or CNPJ for businesses consumers)
        """

    class ConfirmParamsPaymentMethodDataCashapp(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataCustomerBalance(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataEps(TypedDict):
        bank: NotRequired[
            Literal[
                "arzte_und_apotheker_bank",
                "austrian_anadi_bank_ag",
                "bank_austria",
                "bankhaus_carl_spangler",
                "bankhaus_schelhammer_und_schattera_ag",
                "bawag_psk_ag",
                "bks_bank_ag",
                "brull_kallmus_bank_ag",
                "btv_vier_lander_bank",
                "capital_bank_grawe_gruppe_ag",
                "deutsche_bank_ag",
                "dolomitenbank",
                "easybank_ag",
                "erste_bank_und_sparkassen",
                "hypo_alpeadriabank_international_ag",
                "hypo_bank_burgenland_aktiengesellschaft",
                "hypo_noe_lb_fur_niederosterreich_u_wien",
                "hypo_oberosterreich_salzburg_steiermark",
                "hypo_tirol_bank_ag",
                "hypo_vorarlberg_bank_ag",
                "marchfelder_bank",
                "oberbank_ag",
                "raiffeisen_bankengruppe_osterreich",
                "schoellerbank_ag",
                "sparda_bank_wien",
                "volksbank_gruppe",
                "volkskreditbank_ag",
                "vr_bank_braunau",
            ]
        ]
        """
        The customer's bank.
        """

    class ConfirmParamsPaymentMethodDataFpx(TypedDict):
        account_holder_type: NotRequired[Literal["company", "individual"]]
        """
        Account holder type for FPX transaction
        """
        bank: Literal[
            "affin_bank",
            "agrobank",
            "alliance_bank",
            "ambank",
            "bank_islam",
            "bank_muamalat",
            "bank_of_china",
            "bank_rakyat",
            "bsn",
            "cimb",
            "deutsche_bank",
            "hong_leong_bank",
            "hsbc",
            "kfh",
            "maybank2e",
            "maybank2u",
            "ocbc",
            "pb_enterprise",
            "public_bank",
            "rhb",
            "standard_chartered",
            "uob",
        ]
        """
        The customer's bank.
        """

    class ConfirmParamsPaymentMethodDataGiropay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataGopay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataGrabpay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataIdBankTransfer(TypedDict):
        bank: NotRequired[Literal["bca", "bni", "bri", "cimb", "permata"]]
        """
        Bank where the account is held.
        """

    class ConfirmParamsPaymentMethodDataIdeal(TypedDict):
        bank: NotRequired[
            Literal[
                "abn_amro",
                "asn_bank",
                "bunq",
                "handelsbanken",
                "ing",
                "knab",
                "moneyou",
                "n26",
                "nn",
                "rabobank",
                "regiobank",
                "revolut",
                "sns_bank",
                "triodos_bank",
                "van_lanschot",
                "yoursafe",
            ]
        ]
        """
        The customer's bank. Only use this parameter for existing customers. Don't use it for new customers.
        """

    class ConfirmParamsPaymentMethodDataInteracPresent(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataKakaoPay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataKlarna(TypedDict):
        dob: NotRequired["SetupIntent.ConfirmParamsPaymentMethodDataKlarnaDob"]
        """
        Customer's date of birth
        """

    class ConfirmParamsPaymentMethodDataKlarnaDob(TypedDict):
        day: int
        """
        The day of birth, between 1 and 31.
        """
        month: int
        """
        The month of birth, between 1 and 12.
        """
        year: int
        """
        The four-digit year of birth.
        """

    class ConfirmParamsPaymentMethodDataKonbini(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataKrCard(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataLink(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataMbWay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataMobilepay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataMultibanco(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataNaverPay(TypedDict):
        funding: NotRequired[Literal["card", "points"]]
        """
        Whether to use Naver Pay points or a card to fund this transaction. If not provided, this defaults to `card`.
        """

    class ConfirmParamsPaymentMethodDataNzBankAccount(TypedDict):
        account_holder_name: NotRequired[str]
        """
        The name on the bank account. Only required if the account holder name is different from the name of the authorized signatory collected in the PaymentMethod's billing details.
        """
        account_number: str
        """
        The account number for the bank account.
        """
        bank_code: str
        """
        The numeric code for the bank account's bank.
        """
        branch_code: str
        """
        The numeric code for the bank account's bank branch.
        """
        reference: NotRequired[str]
        suffix: str
        """
        The suffix of the bank account number.
        """

    class ConfirmParamsPaymentMethodDataOxxo(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataP24(TypedDict):
        bank: NotRequired[
            Literal[
                "alior_bank",
                "bank_millennium",
                "bank_nowy_bfg_sa",
                "bank_pekao_sa",
                "banki_spbdzielcze",
                "blik",
                "bnp_paribas",
                "boz",
                "citi_handlowy",
                "credit_agricole",
                "envelobank",
                "etransfer_pocztowy24",
                "getin_bank",
                "ideabank",
                "ing",
                "inteligo",
                "mbank_mtransfer",
                "nest_przelew",
                "noble_pay",
                "pbac_z_ipko",
                "plus_bank",
                "santander_przelew24",
                "tmobile_usbugi_bankowe",
                "toyota_bank",
                "velobank",
                "volkswagen_bank",
            ]
        ]
        """
        The customer's bank.
        """

    class ConfirmParamsPaymentMethodDataPayByBank(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataPayco(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataPaynow(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataPaypal(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataPayto(TypedDict):
        account_number: NotRequired[str]
        """
        The account number for the bank account.
        """
        bsb_number: NotRequired[str]
        """
        Bank-State-Branch number of the bank account.
        """
        pay_id: NotRequired[str]
        """
        The PayID alias for the bank account.
        """

    class ConfirmParamsPaymentMethodDataPix(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataPromptpay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataQris(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataRadarOptions(TypedDict):
        session: NotRequired[str]
        """
        A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
        """

    class ConfirmParamsPaymentMethodDataRechnung(TypedDict):
        dob: "SetupIntent.ConfirmParamsPaymentMethodDataRechnungDob"
        """
        Customer's date of birth
        """

    class ConfirmParamsPaymentMethodDataRechnungDob(TypedDict):
        day: int
        """
        The day of birth, between 1 and 31.
        """
        month: int
        """
        The month of birth, between 1 and 12.
        """
        year: int
        """
        The four-digit year of birth.
        """

    class ConfirmParamsPaymentMethodDataRevolutPay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataSamsungPay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataSatispay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataSepaDebit(TypedDict):
        iban: str
        """
        IBAN of the bank account.
        """

    class ConfirmParamsPaymentMethodDataShopeepay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataSofort(TypedDict):
        country: Literal["AT", "BE", "DE", "ES", "IT", "NL"]
        """
        Two-letter ISO code representing the country the bank account is located in.
        """

    class ConfirmParamsPaymentMethodDataStripeBalance(TypedDict):
        account: NotRequired[str]
        """
        The connected account ID whose Stripe balance to use as the source of payment
        """
        source_type: NotRequired[Literal["bank_account", "card", "fpx"]]
        """
        The [source_type](https://docs.stripe.com/api/balance/balance_object#balance_object-available-source_types) of the balance
        """

    class ConfirmParamsPaymentMethodDataSwish(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataTwint(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataUsBankAccount(TypedDict):
        account_holder_type: NotRequired[Literal["company", "individual"]]
        """
        Account holder type: individual or company.
        """
        account_number: NotRequired[str]
        """
        Account number of the bank account.
        """
        account_type: NotRequired[Literal["checking", "savings"]]
        """
        Account type: checkings or savings. Defaults to checking if omitted.
        """
        financial_connections_account: NotRequired[str]
        """
        The ID of a Financial Connections Account to use as a payment method.
        """
        routing_number: NotRequired[str]
        """
        Routing number of the bank account.
        """

    class ConfirmParamsPaymentMethodDataWechatPay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodDataZip(TypedDict):
        pass

    class ConfirmParamsPaymentMethodOptions(TypedDict):
        acss_debit: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsAcssDebit"
        ]
        """
        If this is a `acss_debit` SetupIntent, this sub-hash contains details about the ACSS Debit payment method options.
        """
        amazon_pay: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsAmazonPay"
        ]
        """
        If this is a `amazon_pay` SetupIntent, this sub-hash contains details about the AmazonPay payment method options.
        """
        bacs_debit: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsBacsDebit"
        ]
        """
        If this is a `bacs_debit` SetupIntent, this sub-hash contains details about the Bacs Debit payment method options.
        """
        card: NotRequired["SetupIntent.ConfirmParamsPaymentMethodOptionsCard"]
        """
        Configuration for any card setup attempted on this SetupIntent.
        """
        card_present: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsCardPresent"
        ]
        """
        If this is a `card_present` PaymentMethod, this sub-hash contains details about the card-present payment method options.
        """
        link: NotRequired["SetupIntent.ConfirmParamsPaymentMethodOptionsLink"]
        """
        If this is a `link` PaymentMethod, this sub-hash contains details about the Link payment method options.
        """
        paypal: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsPaypal"
        ]
        """
        If this is a `paypal` PaymentMethod, this sub-hash contains details about the PayPal payment method options.
        """
        payto: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsPayto"
        ]
        """
        If this is a `payto` SetupIntent, this sub-hash contains details about the PayTo payment method options.
        """
        sepa_debit: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsSepaDebit"
        ]
        """
        If this is a `sepa_debit` SetupIntent, this sub-hash contains details about the SEPA Debit payment method options.
        """
        us_bank_account: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsUsBankAccount"
        ]
        """
        If this is a `us_bank_account` SetupIntent, this sub-hash contains details about the US bank account payment method options.
        """

    class ConfirmParamsPaymentMethodOptionsAcssDebit(TypedDict):
        currency: NotRequired[Literal["cad", "usd"]]
        """
        Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
        """
        mandate_options: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsAcssDebitMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """
        verification_method: NotRequired[
            Literal["automatic", "instant", "microdeposits"]
        ]
        """
        Bank account verification method.
        """

    class ConfirmParamsPaymentMethodOptionsAcssDebitMandateOptions(TypedDict):
        custom_mandate_url: NotRequired["Literal['']|str"]
        """
        A URL for custom mandate text to render during confirmation step.
        The URL will be rendered with additional GET parameters `payment_intent` and `payment_intent_client_secret` when confirming a Payment Intent,
        or `setup_intent` and `setup_intent_client_secret` when confirming a Setup Intent.
        """
        default_for: NotRequired[List[Literal["invoice", "subscription"]]]
        """
        List of Stripe products where this mandate can be selected automatically.
        """
        interval_description: NotRequired[str]
        """
        Description of the mandate interval. Only required if 'payment_schedule' parameter is 'interval' or 'combined'.
        """
        payment_schedule: NotRequired[
            Literal["combined", "interval", "sporadic"]
        ]
        """
        Payment schedule for the mandate.
        """
        transaction_type: NotRequired[Literal["business", "personal"]]
        """
        Transaction type of the mandate.
        """

    class ConfirmParamsPaymentMethodOptionsAmazonPay(TypedDict):
        pass

    class ConfirmParamsPaymentMethodOptionsBacsDebit(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsBacsDebitMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """

    class ConfirmParamsPaymentMethodOptionsBacsDebitMandateOptions(TypedDict):
        reference_prefix: NotRequired["Literal['']|str"]
        """
        Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'DDIC' or 'STRIPE'.
        """

    class ConfirmParamsPaymentMethodOptionsCard(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsCardMandateOptions"
        ]
        """
        Configuration options for setting up an eMandate for cards issued in India.
        """
        moto: NotRequired[bool]
        """
        When specified, this parameter signals that a card has been collected
        as MOTO (Mail Order Telephone Order) and thus out of scope for SCA. This
        parameter can only be provided during confirmation.
        """
        network: NotRequired[
            Literal[
                "amex",
                "cartes_bancaires",
                "diners",
                "discover",
                "eftpos_au",
                "girocard",
                "interac",
                "jcb",
                "link",
                "mastercard",
                "unionpay",
                "unknown",
                "visa",
            ]
        ]
        """
        Selected network to process this SetupIntent on. Depends on the available networks of the card attached to the SetupIntent. Can be only set confirm-time.
        """
        request_three_d_secure: NotRequired[
            Literal["any", "automatic", "challenge"]
        ]
        """
        We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://stripe.com/docs/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. If not provided, this value defaults to `automatic`. Read our guide on [manually requesting 3D Secure](https://stripe.com/docs/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
        """
        three_d_secure: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsCardThreeDSecure"
        ]
        """
        If 3D Secure authentication was performed with a third-party provider,
        the authentication details to use for this setup.
        """

    class ConfirmParamsPaymentMethodOptionsCardMandateOptions(TypedDict):
        amount: int
        """
        Amount to be charged for future payments.
        """
        amount_type: Literal["fixed", "maximum"]
        """
        One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
        """
        currency: str
        """
        Currency in which future payments will be charged. Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
        """
        description: NotRequired[str]
        """
        A description of the mandate or subscription that is meant to be displayed to the customer.
        """
        end_date: NotRequired[int]
        """
        End date of the mandate or subscription. If not provided, the mandate will be active until canceled. If provided, end date should be after start date.
        """
        interval: Literal["day", "month", "sporadic", "week", "year"]
        """
        Specifies payment frequency. One of `day`, `week`, `month`, `year`, or `sporadic`.
        """
        interval_count: NotRequired[int]
        """
        The number of intervals between payments. For example, `interval=month` and `interval_count=3` indicates one payment every three months. Maximum of one year interval allowed (1 year, 12 months, or 52 weeks). This parameter is optional when `interval=sporadic`.
        """
        reference: str
        """
        Unique identifier for the mandate or subscription.
        """
        start_date: int
        """
        Start date of the mandate or subscription. Start date should not be lesser than yesterday.
        """
        supported_types: NotRequired[List[Literal["india"]]]
        """
        Specifies the type of mandates supported. Possible values are `india`.
        """

    class ConfirmParamsPaymentMethodOptionsCardPresent(TypedDict):
        pass

    class ConfirmParamsPaymentMethodOptionsCardThreeDSecure(TypedDict):
        ares_trans_status: NotRequired[
            Literal["A", "C", "I", "N", "R", "U", "Y"]
        ]
        """
        The `transStatus` returned from the card Issuer's ACS in the ARes.
        """
        cryptogram: NotRequired[str]
        """
        The cryptogram, also known as the "authentication value" (AAV, CAVV or
        AEVV). This value is 20 bytes, base64-encoded into a 28-character string.
        (Most 3D Secure providers will return the base64-encoded version, which
        is what you should specify here.)
        """
        electronic_commerce_indicator: NotRequired[
            Literal["01", "02", "05", "06", "07"]
        ]
        """
        The Electronic Commerce Indicator (ECI) is returned by your 3D Secure
        provider and indicates what degree of authentication was performed.
        """
        network_options: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsCardThreeDSecureNetworkOptions"
        ]
        """
        Network specific 3DS fields. Network specific arguments require an
        explicit card brand choice. The parameter `payment_method_options.card.network``
        must be populated accordingly
        """
        requestor_challenge_indicator: NotRequired[str]
        """
        The challenge indicator (`threeDSRequestorChallengeInd`) which was requested in the
        AReq sent to the card Issuer's ACS. A string containing 2 digits from 01-99.
        """
        transaction_id: NotRequired[str]
        """
        For 3D Secure 1, the XID. For 3D Secure 2, the Directory Server
        Transaction ID (dsTransID).
        """
        version: NotRequired[Literal["1.0.2", "2.1.0", "2.2.0"]]
        """
        The version of 3D Secure that was performed.
        """

    class ConfirmParamsPaymentMethodOptionsCardThreeDSecureNetworkOptions(
        TypedDict,
    ):
        cartes_bancaires: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsCardThreeDSecureNetworkOptionsCartesBancaires"
        ]
        """
        Cartes Bancaires-specific 3DS fields.
        """

    class ConfirmParamsPaymentMethodOptionsCardThreeDSecureNetworkOptionsCartesBancaires(
        TypedDict,
    ):
        cb_avalgo: Literal["0", "1", "2", "3", "4", "A"]
        """
        The cryptogram calculation algorithm used by the card Issuer's ACS
        to calculate the Authentication cryptogram. Also known as `cavvAlgorithm`.
        messageExtension: CB-AVALGO
        """
        cb_exemption: NotRequired[str]
        """
        The exemption indicator returned from Cartes Bancaires in the ARes.
        message extension: CB-EXEMPTION; string (4 characters)
        This is a 3 byte bitmap (low significant byte first and most significant
        bit first) that has been Base64 encoded
        """
        cb_score: NotRequired[int]
        """
        The risk score returned from Cartes Bancaires in the ARes.
        message extension: CB-SCORE; numeric value 0-99
        """

    class ConfirmParamsPaymentMethodOptionsLink(TypedDict):
        persistent_token: NotRequired[str]
        """
        [Deprecated] This is a legacy parameter that no longer has any function.
        """

    class ConfirmParamsPaymentMethodOptionsPaypal(TypedDict):
        billing_agreement_id: NotRequired[str]
        """
        The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
        """
        currency: NotRequired[str]
        subsellers: NotRequired[List[str]]
        """
        The Stripe connected account IDs of the sellers on the platform for this transaction (optional). Only allowed when [separate charges and transfers](https://stripe.com/docs/connect/separate-charges-and-transfers) are used.
        """

    class ConfirmParamsPaymentMethodOptionsPayto(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsPaytoMandateOptions"
        ]
        """
        Additional fields for Mandate creation.
        """

    class ConfirmParamsPaymentMethodOptionsPaytoMandateOptions(TypedDict):
        amount: NotRequired[int]
        """
        Amount that will be collected. It is required when `amount_type` is `fixed`.
        """
        amount_type: NotRequired[Literal["fixed", "maximum"]]
        """
        The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively.
        """
        end_date: NotRequired[str]
        """
        Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
        """
        payment_schedule: NotRequired[
            Literal[
                "adhoc",
                "annual",
                "daily",
                "fortnightly",
                "monthly",
                "quarterly",
                "semi_annual",
                "weekly",
            ]
        ]
        """
        The periodicity at which payments will be collected.
        """
        payments_per_period: NotRequired[int]
        """
        The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
        """
        purpose: NotRequired[
            Literal[
                "dependant_support",
                "government",
                "loan",
                "mortgage",
                "other",
                "pension",
                "personal",
                "retail",
                "salary",
                "tax",
                "utility",
            ]
        ]
        """
        The purpose for which payments are made. Defaults to retail.
        """
        start_date: NotRequired[str]
        """
        Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
        """

    class ConfirmParamsPaymentMethodOptionsSepaDebit(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsSepaDebitMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """

    class ConfirmParamsPaymentMethodOptionsSepaDebitMandateOptions(TypedDict):
        reference_prefix: NotRequired["Literal['']|str"]
        """
        Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'STRIPE'.
        """

    class ConfirmParamsPaymentMethodOptionsUsBankAccount(TypedDict):
        financial_connections: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsUsBankAccountFinancialConnections"
        ]
        """
        Additional fields for Financial Connections Session creation
        """
        mandate_options: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsUsBankAccountMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """
        networks: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsUsBankAccountNetworks"
        ]
        """
        Additional fields for network related functions
        """
        verification_method: NotRequired[
            Literal["automatic", "instant", "microdeposits"]
        ]
        """
        Bank account verification method.
        """

    class ConfirmParamsPaymentMethodOptionsUsBankAccountFinancialConnections(
        TypedDict,
    ):
        filters: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsFilters"
        ]
        """
        Provide filters for the linked accounts that the customer can select for the payment method.
        """
        manual_entry: NotRequired[
            "SetupIntent.ConfirmParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsManualEntry"
        ]
        """
        Customize manual entry behavior
        """
        permissions: NotRequired[
            List[
                Literal[
                    "balances", "ownership", "payment_method", "transactions"
                ]
            ]
        ]
        """
        The list of permissions to request. If this parameter is passed, the `payment_method` permission must be included. Valid permissions include: `balances`, `ownership`, `payment_method`, and `transactions`.
        """
        prefetch: NotRequired[
            List[
                Literal[
                    "balances",
                    "inferred_balances",
                    "ownership",
                    "transactions",
                ]
            ]
        ]
        """
        List of data features that you would like to retrieve upon account creation.
        """
        return_url: NotRequired[str]
        """
        For webview integrations only. Upon completing OAuth login in the native browser, the user will be redirected to this URL to return to your app.
        """

    class ConfirmParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsFilters(
        TypedDict,
    ):
        account_subcategories: NotRequired[
            List[Literal["checking", "savings"]]
        ]
        """
        The account subcategories to use to filter for selectable accounts. Valid subcategories are `checking` and `savings`.
        """
        institution: NotRequired[str]
        """
        ID of the institution to use to filter for selectable accounts.
        """

    class ConfirmParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsManualEntry(
        TypedDict,
    ):
        mode: Literal["automatic", "custom"]
        """
        Settings for configuring manual entry of account details.
        """

    class ConfirmParamsPaymentMethodOptionsUsBankAccountMandateOptions(
        TypedDict,
    ):
        collection_method: NotRequired["Literal['']|Literal['paper']"]
        """
        The method used to collect offline mandate customer acceptance.
        """

    class ConfirmParamsPaymentMethodOptionsUsBankAccountNetworks(TypedDict):
        requested: NotRequired[List[Literal["ach", "us_domestic_wire"]]]
        """
        Triggers validations to run across the selected networks
        """

    class CreateParams(RequestOptions):
        attach_to_self: NotRequired[bool]
        """
        If present, the SetupIntent's payment method will be attached to the in-context Stripe Account.

        It can only be used for this Stripe Account's own money movement flows like InboundTransfer and OutboundTransfers. It cannot be set to true when setting up a PaymentMethod for a Customer, and defaults to false when attaching a PaymentMethod to a Customer.
        """
        automatic_payment_methods: NotRequired[
            "SetupIntent.CreateParamsAutomaticPaymentMethods"
        ]
        """
        When you enable this parameter, this SetupIntent accepts payment methods that you enable in the Dashboard and that are compatible with its other parameters.
        """
        confirm: NotRequired[bool]
        """
        Set to `true` to attempt to confirm this SetupIntent immediately. This parameter defaults to `false`. If a card is the attached payment method, you can provide a `return_url` in case further authentication is necessary.
        """
        confirmation_token: NotRequired[str]
        """
        ID of the ConfirmationToken used to confirm this SetupIntent.

        If the provided ConfirmationToken contains properties that are also being provided in this request, such as `payment_method`, then the values in this request will take precedence.
        """
        customer: NotRequired[str]
        """
        ID of the Customer this SetupIntent belongs to, if one exists.

        If present, the SetupIntent's payment method will be attached to the Customer on successful setup. Payment methods attached to other Customers cannot be used with this SetupIntent.
        """
        customer_account: NotRequired[str]
        """
        ID of the Account this SetupIntent belongs to, if one exists.

        If present, the SetupIntent's payment method will be attached to the Account on successful setup. Payment methods attached to other Accounts cannot be used with this SetupIntent.
        """
        description: NotRequired[str]
        """
        An arbitrary string attached to the object. Often useful for displaying to users.
        """
        expand: NotRequired[List[str]]
        """
        Specifies which fields in the response should be expanded.
        """
        flow_directions: NotRequired[List[Literal["inbound", "outbound"]]]
        """
        Indicates the directions of money movement for which this payment method is intended to be used.

        Include `inbound` if you intend to use the payment method as the origin to pull funds from. Include `outbound` if you intend to use the payment method as the destination to send funds to. You can include both if you intend to use the payment method for both purposes.
        """
        mandate_data: NotRequired[
            "Literal['']|SetupIntent.CreateParamsMandateData"
        ]
        """
        This hash contains details about the mandate to create. This parameter can only be used with [`confirm=true`](https://stripe.com/docs/api/setup_intents/create#create_setup_intent-confirm).
        """
        metadata: NotRequired[Dict[str, str]]
        """
        Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
        """
        on_behalf_of: NotRequired[str]
        """
        The Stripe account ID created for this SetupIntent.
        """
        payment_method: NotRequired[str]
        """
        ID of the payment method (a PaymentMethod, Card, or saved Source object) to attach to this SetupIntent.
        """
        payment_method_configuration: NotRequired[str]
        """
        The ID of the [payment method configuration](https://stripe.com/docs/api/payment_method_configurations) to use with this SetupIntent.
        """
        payment_method_data: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodData"
        ]
        """
        When included, this hash creates a PaymentMethod that is set as the [`payment_method`](https://stripe.com/docs/api/setup_intents/object#setup_intent_object-payment_method)
        value in the SetupIntent.
        """
        payment_method_options: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptions"
        ]
        """
        Payment method-specific configuration for this SetupIntent.
        """
        payment_method_types: NotRequired[List[str]]
        """
        The list of payment method types (for example, card) that this SetupIntent can use. If you don't provide this, Stripe will dynamically show relevant payment methods from your [payment method settings](https://dashboard.stripe.com/settings/payment_methods).
        """
        return_url: NotRequired[str]
        """
        The URL to redirect your customer back to after they authenticate or cancel their payment on the payment method's app or site. To redirect to a mobile application, you can alternatively supply an application URI scheme. This parameter can only be used with [`confirm=true`](https://stripe.com/docs/api/setup_intents/create#create_setup_intent-confirm).
        """
        single_use: NotRequired["SetupIntent.CreateParamsSingleUse"]
        """
        If you populate this hash, this SetupIntent generates a `single_use` mandate after successful completion.

        Single-use mandates are only valid for the following payment methods: `acss_debit`, `alipay`, `au_becs_debit`, `bacs_debit`, `bancontact`, `boleto`, `ideal`, `link`, `sepa_debit`, and `us_bank_account`.
        """
        usage: NotRequired[Literal["off_session", "on_session"]]
        """
        Indicates how the payment method is intended to be used in the future. If not provided, this value defaults to `off_session`.
        """
        use_stripe_sdk: NotRequired[bool]
        """
        Set to `true` when confirming server-side and using Stripe.js, iOS, or Android client-side SDKs to handle the next actions.
        """

    class CreateParamsAutomaticPaymentMethods(TypedDict):
        allow_redirects: NotRequired[Literal["always", "never"]]
        """
        Controls whether this SetupIntent will accept redirect-based payment methods.

        Redirect-based payment methods may require your customer to be redirected to a payment method's app or site for authentication or additional steps. To [confirm](https://stripe.com/docs/api/setup_intents/confirm) this SetupIntent, you may be required to provide a `return_url` to redirect customers back to your site after they authenticate or complete the setup.
        """
        enabled: bool
        """
        Whether this feature is enabled.
        """

    class CreateParamsMandateData(TypedDict):
        customer_acceptance: (
            "SetupIntent.CreateParamsMandateDataCustomerAcceptance"
        )
        """
        This hash contains details about the customer acceptance of the Mandate.
        """

    class CreateParamsMandateDataCustomerAcceptance(TypedDict):
        accepted_at: NotRequired[int]
        """
        The time at which the customer accepted the Mandate.
        """
        offline: NotRequired[
            "SetupIntent.CreateParamsMandateDataCustomerAcceptanceOffline"
        ]
        """
        If this is a Mandate accepted offline, this hash contains details about the offline acceptance.
        """
        online: NotRequired[
            "SetupIntent.CreateParamsMandateDataCustomerAcceptanceOnline"
        ]
        """
        If this is a Mandate accepted online, this hash contains details about the online acceptance.
        """
        type: Literal["offline", "online"]
        """
        The type of customer acceptance information included with the Mandate. One of `online` or `offline`.
        """

    class CreateParamsMandateDataCustomerAcceptanceOffline(TypedDict):
        pass

    class CreateParamsMandateDataCustomerAcceptanceOnline(TypedDict):
        ip_address: str
        """
        The IP address from which the Mandate was accepted by the customer.
        """
        user_agent: str
        """
        The user agent of the browser from which the Mandate was accepted by the customer.
        """

    class CreateParamsPaymentMethodData(TypedDict):
        acss_debit: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataAcssDebit"
        ]
        """
        If this is an `acss_debit` PaymentMethod, this hash contains details about the ACSS Debit payment method.
        """
        affirm: NotRequired["SetupIntent.CreateParamsPaymentMethodDataAffirm"]
        """
        If this is an `affirm` PaymentMethod, this hash contains details about the Affirm payment method.
        """
        afterpay_clearpay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataAfterpayClearpay"
        ]
        """
        If this is an `AfterpayClearpay` PaymentMethod, this hash contains details about the AfterpayClearpay payment method.
        """
        alipay: NotRequired["SetupIntent.CreateParamsPaymentMethodDataAlipay"]
        """
        If this is an `Alipay` PaymentMethod, this hash contains details about the Alipay payment method.
        """
        allow_redisplay: NotRequired[
            Literal["always", "limited", "unspecified"]
        ]
        """
        This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to `unspecified`.
        """
        alma: NotRequired["SetupIntent.CreateParamsPaymentMethodDataAlma"]
        """
        If this is a Alma PaymentMethod, this hash contains details about the Alma payment method.
        """
        amazon_pay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataAmazonPay"
        ]
        """
        If this is a AmazonPay PaymentMethod, this hash contains details about the AmazonPay payment method.
        """
        au_becs_debit: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataAuBecsDebit"
        ]
        """
        If this is an `au_becs_debit` PaymentMethod, this hash contains details about the bank account.
        """
        bacs_debit: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataBacsDebit"
        ]
        """
        If this is a `bacs_debit` PaymentMethod, this hash contains details about the Bacs Direct Debit bank account.
        """
        bancontact: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataBancontact"
        ]
        """
        If this is a `bancontact` PaymentMethod, this hash contains details about the Bancontact payment method.
        """
        billie: NotRequired["SetupIntent.CreateParamsPaymentMethodDataBillie"]
        """
        If this is a `billie` PaymentMethod, this hash contains details about the Billie payment method.
        """
        billing_details: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataBillingDetails"
        ]
        """
        Billing information associated with the PaymentMethod that may be used or required by particular types of payment methods.
        """
        blik: NotRequired["SetupIntent.CreateParamsPaymentMethodDataBlik"]
        """
        If this is a `blik` PaymentMethod, this hash contains details about the BLIK payment method.
        """
        boleto: NotRequired["SetupIntent.CreateParamsPaymentMethodDataBoleto"]
        """
        If this is a `boleto` PaymentMethod, this hash contains details about the Boleto payment method.
        """
        cashapp: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataCashapp"
        ]
        """
        If this is a `cashapp` PaymentMethod, this hash contains details about the Cash App Pay payment method.
        """
        customer_balance: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataCustomerBalance"
        ]
        """
        If this is a `customer_balance` PaymentMethod, this hash contains details about the CustomerBalance payment method.
        """
        eps: NotRequired["SetupIntent.CreateParamsPaymentMethodDataEps"]
        """
        If this is an `eps` PaymentMethod, this hash contains details about the EPS payment method.
        """
        fpx: NotRequired["SetupIntent.CreateParamsPaymentMethodDataFpx"]
        """
        If this is an `fpx` PaymentMethod, this hash contains details about the FPX payment method.
        """
        giropay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataGiropay"
        ]
        """
        If this is a `giropay` PaymentMethod, this hash contains details about the Giropay payment method.
        """
        gopay: NotRequired["SetupIntent.CreateParamsPaymentMethodDataGopay"]
        """
        If this is a Gopay PaymentMethod, this hash contains details about the Gopay payment method.
        """
        grabpay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataGrabpay"
        ]
        """
        If this is a `grabpay` PaymentMethod, this hash contains details about the GrabPay payment method.
        """
        id_bank_transfer: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataIdBankTransfer"
        ]
        """
        If this is an `IdBankTransfer` PaymentMethod, this hash contains details about the IdBankTransfer payment method.
        """
        ideal: NotRequired["SetupIntent.CreateParamsPaymentMethodDataIdeal"]
        """
        If this is an `ideal` PaymentMethod, this hash contains details about the iDEAL payment method.
        """
        interac_present: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataInteracPresent"
        ]
        """
        If this is an `interac_present` PaymentMethod, this hash contains details about the Interac Present payment method.
        """
        kakao_pay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataKakaoPay"
        ]
        """
        If this is a `kakao_pay` PaymentMethod, this hash contains details about the Kakao Pay payment method.
        """
        klarna: NotRequired["SetupIntent.CreateParamsPaymentMethodDataKlarna"]
        """
        If this is a `klarna` PaymentMethod, this hash contains details about the Klarna payment method.
        """
        konbini: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataKonbini"
        ]
        """
        If this is a `konbini` PaymentMethod, this hash contains details about the Konbini payment method.
        """
        kr_card: NotRequired["SetupIntent.CreateParamsPaymentMethodDataKrCard"]
        """
        If this is a `kr_card` PaymentMethod, this hash contains details about the Korean Card payment method.
        """
        link: NotRequired["SetupIntent.CreateParamsPaymentMethodDataLink"]
        """
        If this is an `Link` PaymentMethod, this hash contains details about the Link payment method.
        """
        mb_way: NotRequired["SetupIntent.CreateParamsPaymentMethodDataMbWay"]
        """
        If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
        """
        metadata: NotRequired[Dict[str, str]]
        """
        Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
        """
        mobilepay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataMobilepay"
        ]
        """
        If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
        """
        multibanco: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataMultibanco"
        ]
        """
        If this is a `multibanco` PaymentMethod, this hash contains details about the Multibanco payment method.
        """
        naver_pay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataNaverPay"
        ]
        """
        If this is a `naver_pay` PaymentMethod, this hash contains details about the Naver Pay payment method.
        """
        nz_bank_account: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataNzBankAccount"
        ]
        """
        If this is an nz_bank_account PaymentMethod, this hash contains details about the nz_bank_account payment method.
        """
        oxxo: NotRequired["SetupIntent.CreateParamsPaymentMethodDataOxxo"]
        """
        If this is an `oxxo` PaymentMethod, this hash contains details about the OXXO payment method.
        """
        p24: NotRequired["SetupIntent.CreateParamsPaymentMethodDataP24"]
        """
        If this is a `p24` PaymentMethod, this hash contains details about the P24 payment method.
        """
        pay_by_bank: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataPayByBank"
        ]
        """
        If this is a `pay_by_bank` PaymentMethod, this hash contains details about the PayByBank payment method.
        """
        payco: NotRequired["SetupIntent.CreateParamsPaymentMethodDataPayco"]
        """
        If this is a `payco` PaymentMethod, this hash contains details about the PAYCO payment method.
        """
        paynow: NotRequired["SetupIntent.CreateParamsPaymentMethodDataPaynow"]
        """
        If this is a `paynow` PaymentMethod, this hash contains details about the PayNow payment method.
        """
        paypal: NotRequired["SetupIntent.CreateParamsPaymentMethodDataPaypal"]
        """
        If this is a `paypal` PaymentMethod, this hash contains details about the PayPal payment method.
        """
        payto: NotRequired["SetupIntent.CreateParamsPaymentMethodDataPayto"]
        """
        If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
        """
        pix: NotRequired["SetupIntent.CreateParamsPaymentMethodDataPix"]
        """
        If this is a `pix` PaymentMethod, this hash contains details about the Pix payment method.
        """
        promptpay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataPromptpay"
        ]
        """
        If this is a `promptpay` PaymentMethod, this hash contains details about the PromptPay payment method.
        """
        qris: NotRequired["SetupIntent.CreateParamsPaymentMethodDataQris"]
        """
        If this is a `qris` PaymentMethod, this hash contains details about the QRIS payment method.
        """
        radar_options: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataRadarOptions"
        ]
        """
        Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information.
        """
        rechnung: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataRechnung"
        ]
        """
        If this is a `rechnung` PaymentMethod, this hash contains details about the Rechnung payment method.
        """
        revolut_pay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataRevolutPay"
        ]
        """
        If this is a `revolut_pay` PaymentMethod, this hash contains details about the Revolut Pay payment method.
        """
        samsung_pay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataSamsungPay"
        ]
        """
        If this is a `samsung_pay` PaymentMethod, this hash contains details about the SamsungPay payment method.
        """
        satispay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataSatispay"
        ]
        """
        If this is a `satispay` PaymentMethod, this hash contains details about the Satispay payment method.
        """
        sepa_debit: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataSepaDebit"
        ]
        """
        If this is a `sepa_debit` PaymentMethod, this hash contains details about the SEPA debit bank account.
        """
        shopeepay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataShopeepay"
        ]
        """
        If this is a Shopeepay PaymentMethod, this hash contains details about the Shopeepay payment method.
        """
        sofort: NotRequired["SetupIntent.CreateParamsPaymentMethodDataSofort"]
        """
        If this is a `sofort` PaymentMethod, this hash contains details about the SOFORT payment method.
        """
        stripe_balance: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataStripeBalance"
        ]
        """
        This hash contains details about the Stripe balance payment method.
        """
        swish: NotRequired["SetupIntent.CreateParamsPaymentMethodDataSwish"]
        """
        If this is a `swish` PaymentMethod, this hash contains details about the Swish payment method.
        """
        twint: NotRequired["SetupIntent.CreateParamsPaymentMethodDataTwint"]
        """
        If this is a TWINT PaymentMethod, this hash contains details about the TWINT payment method.
        """
        type: Literal[
            "acss_debit",
            "affirm",
            "afterpay_clearpay",
            "alipay",
            "alma",
            "amazon_pay",
            "au_becs_debit",
            "bacs_debit",
            "bancontact",
            "billie",
            "blik",
            "boleto",
            "cashapp",
            "customer_balance",
            "eps",
            "fpx",
            "giropay",
            "gopay",
            "grabpay",
            "id_bank_transfer",
            "ideal",
            "kakao_pay",
            "klarna",
            "konbini",
            "kr_card",
            "link",
            "mb_way",
            "mobilepay",
            "multibanco",
            "naver_pay",
            "nz_bank_account",
            "oxxo",
            "p24",
            "pay_by_bank",
            "payco",
            "paynow",
            "paypal",
            "payto",
            "pix",
            "promptpay",
            "qris",
            "rechnung",
            "revolut_pay",
            "samsung_pay",
            "satispay",
            "sepa_debit",
            "shopeepay",
            "sofort",
            "stripe_balance",
            "swish",
            "twint",
            "us_bank_account",
            "wechat_pay",
            "zip",
        ]
        """
        The type of the PaymentMethod. An additional hash is included on the PaymentMethod with a name matching this value. It contains additional information specific to the PaymentMethod type.
        """
        us_bank_account: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataUsBankAccount"
        ]
        """
        If this is an `us_bank_account` PaymentMethod, this hash contains details about the US bank account payment method.
        """
        wechat_pay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodDataWechatPay"
        ]
        """
        If this is an `wechat_pay` PaymentMethod, this hash contains details about the wechat_pay payment method.
        """
        zip: NotRequired["SetupIntent.CreateParamsPaymentMethodDataZip"]
        """
        If this is a `zip` PaymentMethod, this hash contains details about the Zip payment method.
        """

    class CreateParamsPaymentMethodDataAcssDebit(TypedDict):
        account_number: str
        """
        Customer's bank account number.
        """
        institution_number: str
        """
        Institution number of the customer's bank.
        """
        transit_number: str
        """
        Transit number of the customer's bank.
        """

    class CreateParamsPaymentMethodDataAffirm(TypedDict):
        pass

    class CreateParamsPaymentMethodDataAfterpayClearpay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataAlipay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataAlma(TypedDict):
        pass

    class CreateParamsPaymentMethodDataAmazonPay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataAuBecsDebit(TypedDict):
        account_number: str
        """
        The account number for the bank account.
        """
        bsb_number: str
        """
        Bank-State-Branch number of the bank account.
        """

    class CreateParamsPaymentMethodDataBacsDebit(TypedDict):
        account_number: NotRequired[str]
        """
        Account number of the bank account that the funds will be debited from.
        """
        sort_code: NotRequired[str]
        """
        Sort code of the bank account. (e.g., `10-20-30`)
        """

    class CreateParamsPaymentMethodDataBancontact(TypedDict):
        pass

    class CreateParamsPaymentMethodDataBillie(TypedDict):
        pass

    class CreateParamsPaymentMethodDataBillingDetails(TypedDict):
        address: NotRequired[
            "Literal['']|SetupIntent.CreateParamsPaymentMethodDataBillingDetailsAddress"
        ]
        """
        Billing address.
        """
        email: NotRequired["Literal['']|str"]
        """
        Email address.
        """
        name: NotRequired["Literal['']|str"]
        """
        Full name.
        """
        phone: NotRequired["Literal['']|str"]
        """
        Billing phone number (including extension).
        """
        tax_id: NotRequired[str]
        """
        Taxpayer identification number. Used only for transactions between LATAM buyers and non-LATAM sellers.
        """

    class CreateParamsPaymentMethodDataBillingDetailsAddress(TypedDict):
        city: NotRequired[str]
        """
        City, district, suburb, town, or village.
        """
        country: NotRequired[str]
        """
        Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
        """
        line1: NotRequired[str]
        """
        Address line 1 (e.g., street, PO Box, or company name).
        """
        line2: NotRequired[str]
        """
        Address line 2 (e.g., apartment, suite, unit, or building).
        """
        postal_code: NotRequired[str]
        """
        ZIP or postal code.
        """
        state: NotRequired[str]
        """
        State, county, province, or region.
        """

    class CreateParamsPaymentMethodDataBlik(TypedDict):
        pass

    class CreateParamsPaymentMethodDataBoleto(TypedDict):
        tax_id: str
        """
        The tax ID of the customer (CPF for individual consumers or CNPJ for businesses consumers)
        """

    class CreateParamsPaymentMethodDataCashapp(TypedDict):
        pass

    class CreateParamsPaymentMethodDataCustomerBalance(TypedDict):
        pass

    class CreateParamsPaymentMethodDataEps(TypedDict):
        bank: NotRequired[
            Literal[
                "arzte_und_apotheker_bank",
                "austrian_anadi_bank_ag",
                "bank_austria",
                "bankhaus_carl_spangler",
                "bankhaus_schelhammer_und_schattera_ag",
                "bawag_psk_ag",
                "bks_bank_ag",
                "brull_kallmus_bank_ag",
                "btv_vier_lander_bank",
                "capital_bank_grawe_gruppe_ag",
                "deutsche_bank_ag",
                "dolomitenbank",
                "easybank_ag",
                "erste_bank_und_sparkassen",
                "hypo_alpeadriabank_international_ag",
                "hypo_bank_burgenland_aktiengesellschaft",
                "hypo_noe_lb_fur_niederosterreich_u_wien",
                "hypo_oberosterreich_salzburg_steiermark",
                "hypo_tirol_bank_ag",
                "hypo_vorarlberg_bank_ag",
                "marchfelder_bank",
                "oberbank_ag",
                "raiffeisen_bankengruppe_osterreich",
                "schoellerbank_ag",
                "sparda_bank_wien",
                "volksbank_gruppe",
                "volkskreditbank_ag",
                "vr_bank_braunau",
            ]
        ]
        """
        The customer's bank.
        """

    class CreateParamsPaymentMethodDataFpx(TypedDict):
        account_holder_type: NotRequired[Literal["company", "individual"]]
        """
        Account holder type for FPX transaction
        """
        bank: Literal[
            "affin_bank",
            "agrobank",
            "alliance_bank",
            "ambank",
            "bank_islam",
            "bank_muamalat",
            "bank_of_china",
            "bank_rakyat",
            "bsn",
            "cimb",
            "deutsche_bank",
            "hong_leong_bank",
            "hsbc",
            "kfh",
            "maybank2e",
            "maybank2u",
            "ocbc",
            "pb_enterprise",
            "public_bank",
            "rhb",
            "standard_chartered",
            "uob",
        ]
        """
        The customer's bank.
        """

    class CreateParamsPaymentMethodDataGiropay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataGopay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataGrabpay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataIdBankTransfer(TypedDict):
        bank: NotRequired[Literal["bca", "bni", "bri", "cimb", "permata"]]
        """
        Bank where the account is held.
        """

    class CreateParamsPaymentMethodDataIdeal(TypedDict):
        bank: NotRequired[
            Literal[
                "abn_amro",
                "asn_bank",
                "bunq",
                "handelsbanken",
                "ing",
                "knab",
                "moneyou",
                "n26",
                "nn",
                "rabobank",
                "regiobank",
                "revolut",
                "sns_bank",
                "triodos_bank",
                "van_lanschot",
                "yoursafe",
            ]
        ]
        """
        The customer's bank. Only use this parameter for existing customers. Don't use it for new customers.
        """

    class CreateParamsPaymentMethodDataInteracPresent(TypedDict):
        pass

    class CreateParamsPaymentMethodDataKakaoPay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataKlarna(TypedDict):
        dob: NotRequired["SetupIntent.CreateParamsPaymentMethodDataKlarnaDob"]
        """
        Customer's date of birth
        """

    class CreateParamsPaymentMethodDataKlarnaDob(TypedDict):
        day: int
        """
        The day of birth, between 1 and 31.
        """
        month: int
        """
        The month of birth, between 1 and 12.
        """
        year: int
        """
        The four-digit year of birth.
        """

    class CreateParamsPaymentMethodDataKonbini(TypedDict):
        pass

    class CreateParamsPaymentMethodDataKrCard(TypedDict):
        pass

    class CreateParamsPaymentMethodDataLink(TypedDict):
        pass

    class CreateParamsPaymentMethodDataMbWay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataMobilepay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataMultibanco(TypedDict):
        pass

    class CreateParamsPaymentMethodDataNaverPay(TypedDict):
        funding: NotRequired[Literal["card", "points"]]
        """
        Whether to use Naver Pay points or a card to fund this transaction. If not provided, this defaults to `card`.
        """

    class CreateParamsPaymentMethodDataNzBankAccount(TypedDict):
        account_holder_name: NotRequired[str]
        """
        The name on the bank account. Only required if the account holder name is different from the name of the authorized signatory collected in the PaymentMethod's billing details.
        """
        account_number: str
        """
        The account number for the bank account.
        """
        bank_code: str
        """
        The numeric code for the bank account's bank.
        """
        branch_code: str
        """
        The numeric code for the bank account's bank branch.
        """
        reference: NotRequired[str]
        suffix: str
        """
        The suffix of the bank account number.
        """

    class CreateParamsPaymentMethodDataOxxo(TypedDict):
        pass

    class CreateParamsPaymentMethodDataP24(TypedDict):
        bank: NotRequired[
            Literal[
                "alior_bank",
                "bank_millennium",
                "bank_nowy_bfg_sa",
                "bank_pekao_sa",
                "banki_spbdzielcze",
                "blik",
                "bnp_paribas",
                "boz",
                "citi_handlowy",
                "credit_agricole",
                "envelobank",
                "etransfer_pocztowy24",
                "getin_bank",
                "ideabank",
                "ing",
                "inteligo",
                "mbank_mtransfer",
                "nest_przelew",
                "noble_pay",
                "pbac_z_ipko",
                "plus_bank",
                "santander_przelew24",
                "tmobile_usbugi_bankowe",
                "toyota_bank",
                "velobank",
                "volkswagen_bank",
            ]
        ]
        """
        The customer's bank.
        """

    class CreateParamsPaymentMethodDataPayByBank(TypedDict):
        pass

    class CreateParamsPaymentMethodDataPayco(TypedDict):
        pass

    class CreateParamsPaymentMethodDataPaynow(TypedDict):
        pass

    class CreateParamsPaymentMethodDataPaypal(TypedDict):
        pass

    class CreateParamsPaymentMethodDataPayto(TypedDict):
        account_number: NotRequired[str]
        """
        The account number for the bank account.
        """
        bsb_number: NotRequired[str]
        """
        Bank-State-Branch number of the bank account.
        """
        pay_id: NotRequired[str]
        """
        The PayID alias for the bank account.
        """

    class CreateParamsPaymentMethodDataPix(TypedDict):
        pass

    class CreateParamsPaymentMethodDataPromptpay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataQris(TypedDict):
        pass

    class CreateParamsPaymentMethodDataRadarOptions(TypedDict):
        session: NotRequired[str]
        """
        A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
        """

    class CreateParamsPaymentMethodDataRechnung(TypedDict):
        dob: "SetupIntent.CreateParamsPaymentMethodDataRechnungDob"
        """
        Customer's date of birth
        """

    class CreateParamsPaymentMethodDataRechnungDob(TypedDict):
        day: int
        """
        The day of birth, between 1 and 31.
        """
        month: int
        """
        The month of birth, between 1 and 12.
        """
        year: int
        """
        The four-digit year of birth.
        """

    class CreateParamsPaymentMethodDataRevolutPay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataSamsungPay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataSatispay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataSepaDebit(TypedDict):
        iban: str
        """
        IBAN of the bank account.
        """

    class CreateParamsPaymentMethodDataShopeepay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataSofort(TypedDict):
        country: Literal["AT", "BE", "DE", "ES", "IT", "NL"]
        """
        Two-letter ISO code representing the country the bank account is located in.
        """

    class CreateParamsPaymentMethodDataStripeBalance(TypedDict):
        account: NotRequired[str]
        """
        The connected account ID whose Stripe balance to use as the source of payment
        """
        source_type: NotRequired[Literal["bank_account", "card", "fpx"]]
        """
        The [source_type](https://docs.stripe.com/api/balance/balance_object#balance_object-available-source_types) of the balance
        """

    class CreateParamsPaymentMethodDataSwish(TypedDict):
        pass

    class CreateParamsPaymentMethodDataTwint(TypedDict):
        pass

    class CreateParamsPaymentMethodDataUsBankAccount(TypedDict):
        account_holder_type: NotRequired[Literal["company", "individual"]]
        """
        Account holder type: individual or company.
        """
        account_number: NotRequired[str]
        """
        Account number of the bank account.
        """
        account_type: NotRequired[Literal["checking", "savings"]]
        """
        Account type: checkings or savings. Defaults to checking if omitted.
        """
        financial_connections_account: NotRequired[str]
        """
        The ID of a Financial Connections Account to use as a payment method.
        """
        routing_number: NotRequired[str]
        """
        Routing number of the bank account.
        """

    class CreateParamsPaymentMethodDataWechatPay(TypedDict):
        pass

    class CreateParamsPaymentMethodDataZip(TypedDict):
        pass

    class CreateParamsPaymentMethodOptions(TypedDict):
        acss_debit: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsAcssDebit"
        ]
        """
        If this is a `acss_debit` SetupIntent, this sub-hash contains details about the ACSS Debit payment method options.
        """
        amazon_pay: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsAmazonPay"
        ]
        """
        If this is a `amazon_pay` SetupIntent, this sub-hash contains details about the AmazonPay payment method options.
        """
        bacs_debit: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsBacsDebit"
        ]
        """
        If this is a `bacs_debit` SetupIntent, this sub-hash contains details about the Bacs Debit payment method options.
        """
        card: NotRequired["SetupIntent.CreateParamsPaymentMethodOptionsCard"]
        """
        Configuration for any card setup attempted on this SetupIntent.
        """
        card_present: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsCardPresent"
        ]
        """
        If this is a `card_present` PaymentMethod, this sub-hash contains details about the card-present payment method options.
        """
        link: NotRequired["SetupIntent.CreateParamsPaymentMethodOptionsLink"]
        """
        If this is a `link` PaymentMethod, this sub-hash contains details about the Link payment method options.
        """
        paypal: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsPaypal"
        ]
        """
        If this is a `paypal` PaymentMethod, this sub-hash contains details about the PayPal payment method options.
        """
        payto: NotRequired["SetupIntent.CreateParamsPaymentMethodOptionsPayto"]
        """
        If this is a `payto` SetupIntent, this sub-hash contains details about the PayTo payment method options.
        """
        sepa_debit: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsSepaDebit"
        ]
        """
        If this is a `sepa_debit` SetupIntent, this sub-hash contains details about the SEPA Debit payment method options.
        """
        us_bank_account: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsUsBankAccount"
        ]
        """
        If this is a `us_bank_account` SetupIntent, this sub-hash contains details about the US bank account payment method options.
        """

    class CreateParamsPaymentMethodOptionsAcssDebit(TypedDict):
        currency: NotRequired[Literal["cad", "usd"]]
        """
        Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
        """
        mandate_options: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsAcssDebitMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """
        verification_method: NotRequired[
            Literal["automatic", "instant", "microdeposits"]
        ]
        """
        Bank account verification method.
        """

    class CreateParamsPaymentMethodOptionsAcssDebitMandateOptions(TypedDict):
        custom_mandate_url: NotRequired["Literal['']|str"]
        """
        A URL for custom mandate text to render during confirmation step.
        The URL will be rendered with additional GET parameters `payment_intent` and `payment_intent_client_secret` when confirming a Payment Intent,
        or `setup_intent` and `setup_intent_client_secret` when confirming a Setup Intent.
        """
        default_for: NotRequired[List[Literal["invoice", "subscription"]]]
        """
        List of Stripe products where this mandate can be selected automatically.
        """
        interval_description: NotRequired[str]
        """
        Description of the mandate interval. Only required if 'payment_schedule' parameter is 'interval' or 'combined'.
        """
        payment_schedule: NotRequired[
            Literal["combined", "interval", "sporadic"]
        ]
        """
        Payment schedule for the mandate.
        """
        transaction_type: NotRequired[Literal["business", "personal"]]
        """
        Transaction type of the mandate.
        """

    class CreateParamsPaymentMethodOptionsAmazonPay(TypedDict):
        pass

    class CreateParamsPaymentMethodOptionsBacsDebit(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsBacsDebitMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """

    class CreateParamsPaymentMethodOptionsBacsDebitMandateOptions(TypedDict):
        reference_prefix: NotRequired["Literal['']|str"]
        """
        Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'DDIC' or 'STRIPE'.
        """

    class CreateParamsPaymentMethodOptionsCard(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsCardMandateOptions"
        ]
        """
        Configuration options for setting up an eMandate for cards issued in India.
        """
        moto: NotRequired[bool]
        """
        When specified, this parameter signals that a card has been collected
        as MOTO (Mail Order Telephone Order) and thus out of scope for SCA. This
        parameter can only be provided during confirmation.
        """
        network: NotRequired[
            Literal[
                "amex",
                "cartes_bancaires",
                "diners",
                "discover",
                "eftpos_au",
                "girocard",
                "interac",
                "jcb",
                "link",
                "mastercard",
                "unionpay",
                "unknown",
                "visa",
            ]
        ]
        """
        Selected network to process this SetupIntent on. Depends on the available networks of the card attached to the SetupIntent. Can be only set confirm-time.
        """
        request_three_d_secure: NotRequired[
            Literal["any", "automatic", "challenge"]
        ]
        """
        We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://stripe.com/docs/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. If not provided, this value defaults to `automatic`. Read our guide on [manually requesting 3D Secure](https://stripe.com/docs/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
        """
        three_d_secure: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsCardThreeDSecure"
        ]
        """
        If 3D Secure authentication was performed with a third-party provider,
        the authentication details to use for this setup.
        """

    class CreateParamsPaymentMethodOptionsCardMandateOptions(TypedDict):
        amount: int
        """
        Amount to be charged for future payments.
        """
        amount_type: Literal["fixed", "maximum"]
        """
        One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
        """
        currency: str
        """
        Currency in which future payments will be charged. Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
        """
        description: NotRequired[str]
        """
        A description of the mandate or subscription that is meant to be displayed to the customer.
        """
        end_date: NotRequired[int]
        """
        End date of the mandate or subscription. If not provided, the mandate will be active until canceled. If provided, end date should be after start date.
        """
        interval: Literal["day", "month", "sporadic", "week", "year"]
        """
        Specifies payment frequency. One of `day`, `week`, `month`, `year`, or `sporadic`.
        """
        interval_count: NotRequired[int]
        """
        The number of intervals between payments. For example, `interval=month` and `interval_count=3` indicates one payment every three months. Maximum of one year interval allowed (1 year, 12 months, or 52 weeks). This parameter is optional when `interval=sporadic`.
        """
        reference: str
        """
        Unique identifier for the mandate or subscription.
        """
        start_date: int
        """
        Start date of the mandate or subscription. Start date should not be lesser than yesterday.
        """
        supported_types: NotRequired[List[Literal["india"]]]
        """
        Specifies the type of mandates supported. Possible values are `india`.
        """

    class CreateParamsPaymentMethodOptionsCardPresent(TypedDict):
        pass

    class CreateParamsPaymentMethodOptionsCardThreeDSecure(TypedDict):
        ares_trans_status: NotRequired[
            Literal["A", "C", "I", "N", "R", "U", "Y"]
        ]
        """
        The `transStatus` returned from the card Issuer's ACS in the ARes.
        """
        cryptogram: NotRequired[str]
        """
        The cryptogram, also known as the "authentication value" (AAV, CAVV or
        AEVV). This value is 20 bytes, base64-encoded into a 28-character string.
        (Most 3D Secure providers will return the base64-encoded version, which
        is what you should specify here.)
        """
        electronic_commerce_indicator: NotRequired[
            Literal["01", "02", "05", "06", "07"]
        ]
        """
        The Electronic Commerce Indicator (ECI) is returned by your 3D Secure
        provider and indicates what degree of authentication was performed.
        """
        network_options: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsCardThreeDSecureNetworkOptions"
        ]
        """
        Network specific 3DS fields. Network specific arguments require an
        explicit card brand choice. The parameter `payment_method_options.card.network``
        must be populated accordingly
        """
        requestor_challenge_indicator: NotRequired[str]
        """
        The challenge indicator (`threeDSRequestorChallengeInd`) which was requested in the
        AReq sent to the card Issuer's ACS. A string containing 2 digits from 01-99.
        """
        transaction_id: NotRequired[str]
        """
        For 3D Secure 1, the XID. For 3D Secure 2, the Directory Server
        Transaction ID (dsTransID).
        """
        version: NotRequired[Literal["1.0.2", "2.1.0", "2.2.0"]]
        """
        The version of 3D Secure that was performed.
        """

    class CreateParamsPaymentMethodOptionsCardThreeDSecureNetworkOptions(
        TypedDict,
    ):
        cartes_bancaires: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsCardThreeDSecureNetworkOptionsCartesBancaires"
        ]
        """
        Cartes Bancaires-specific 3DS fields.
        """

    class CreateParamsPaymentMethodOptionsCardThreeDSecureNetworkOptionsCartesBancaires(
        TypedDict,
    ):
        cb_avalgo: Literal["0", "1", "2", "3", "4", "A"]
        """
        The cryptogram calculation algorithm used by the card Issuer's ACS
        to calculate the Authentication cryptogram. Also known as `cavvAlgorithm`.
        messageExtension: CB-AVALGO
        """
        cb_exemption: NotRequired[str]
        """
        The exemption indicator returned from Cartes Bancaires in the ARes.
        message extension: CB-EXEMPTION; string (4 characters)
        This is a 3 byte bitmap (low significant byte first and most significant
        bit first) that has been Base64 encoded
        """
        cb_score: NotRequired[int]
        """
        The risk score returned from Cartes Bancaires in the ARes.
        message extension: CB-SCORE; numeric value 0-99
        """

    class CreateParamsPaymentMethodOptionsLink(TypedDict):
        persistent_token: NotRequired[str]
        """
        [Deprecated] This is a legacy parameter that no longer has any function.
        """

    class CreateParamsPaymentMethodOptionsPaypal(TypedDict):
        billing_agreement_id: NotRequired[str]
        """
        The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
        """
        currency: NotRequired[str]
        subsellers: NotRequired[List[str]]
        """
        The Stripe connected account IDs of the sellers on the platform for this transaction (optional). Only allowed when [separate charges and transfers](https://stripe.com/docs/connect/separate-charges-and-transfers) are used.
        """

    class CreateParamsPaymentMethodOptionsPayto(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsPaytoMandateOptions"
        ]
        """
        Additional fields for Mandate creation.
        """

    class CreateParamsPaymentMethodOptionsPaytoMandateOptions(TypedDict):
        amount: NotRequired[int]
        """
        Amount that will be collected. It is required when `amount_type` is `fixed`.
        """
        amount_type: NotRequired[Literal["fixed", "maximum"]]
        """
        The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively.
        """
        end_date: NotRequired[str]
        """
        Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
        """
        payment_schedule: NotRequired[
            Literal[
                "adhoc",
                "annual",
                "daily",
                "fortnightly",
                "monthly",
                "quarterly",
                "semi_annual",
                "weekly",
            ]
        ]
        """
        The periodicity at which payments will be collected.
        """
        payments_per_period: NotRequired[int]
        """
        The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
        """
        purpose: NotRequired[
            Literal[
                "dependant_support",
                "government",
                "loan",
                "mortgage",
                "other",
                "pension",
                "personal",
                "retail",
                "salary",
                "tax",
                "utility",
            ]
        ]
        """
        The purpose for which payments are made. Defaults to retail.
        """
        start_date: NotRequired[str]
        """
        Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
        """

    class CreateParamsPaymentMethodOptionsSepaDebit(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsSepaDebitMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """

    class CreateParamsPaymentMethodOptionsSepaDebitMandateOptions(TypedDict):
        reference_prefix: NotRequired["Literal['']|str"]
        """
        Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'STRIPE'.
        """

    class CreateParamsPaymentMethodOptionsUsBankAccount(TypedDict):
        financial_connections: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsUsBankAccountFinancialConnections"
        ]
        """
        Additional fields for Financial Connections Session creation
        """
        mandate_options: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsUsBankAccountMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """
        networks: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsUsBankAccountNetworks"
        ]
        """
        Additional fields for network related functions
        """
        verification_method: NotRequired[
            Literal["automatic", "instant", "microdeposits"]
        ]
        """
        Bank account verification method.
        """

    class CreateParamsPaymentMethodOptionsUsBankAccountFinancialConnections(
        TypedDict,
    ):
        filters: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsFilters"
        ]
        """
        Provide filters for the linked accounts that the customer can select for the payment method.
        """
        manual_entry: NotRequired[
            "SetupIntent.CreateParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsManualEntry"
        ]
        """
        Customize manual entry behavior
        """
        permissions: NotRequired[
            List[
                Literal[
                    "balances", "ownership", "payment_method", "transactions"
                ]
            ]
        ]
        """
        The list of permissions to request. If this parameter is passed, the `payment_method` permission must be included. Valid permissions include: `balances`, `ownership`, `payment_method`, and `transactions`.
        """
        prefetch: NotRequired[
            List[
                Literal[
                    "balances",
                    "inferred_balances",
                    "ownership",
                    "transactions",
                ]
            ]
        ]
        """
        List of data features that you would like to retrieve upon account creation.
        """
        return_url: NotRequired[str]
        """
        For webview integrations only. Upon completing OAuth login in the native browser, the user will be redirected to this URL to return to your app.
        """

    class CreateParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsFilters(
        TypedDict,
    ):
        account_subcategories: NotRequired[
            List[Literal["checking", "savings"]]
        ]
        """
        The account subcategories to use to filter for selectable accounts. Valid subcategories are `checking` and `savings`.
        """
        institution: NotRequired[str]
        """
        ID of the institution to use to filter for selectable accounts.
        """

    class CreateParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsManualEntry(
        TypedDict,
    ):
        mode: Literal["automatic", "custom"]
        """
        Settings for configuring manual entry of account details.
        """

    class CreateParamsPaymentMethodOptionsUsBankAccountMandateOptions(
        TypedDict,
    ):
        collection_method: NotRequired["Literal['']|Literal['paper']"]
        """
        The method used to collect offline mandate customer acceptance.
        """

    class CreateParamsPaymentMethodOptionsUsBankAccountNetworks(TypedDict):
        requested: NotRequired[List[Literal["ach", "us_domestic_wire"]]]
        """
        Triggers validations to run across the selected networks
        """

    class CreateParamsSingleUse(TypedDict):
        amount: int
        """
        Amount the customer is granting permission to collect later. A positive integer representing how much to charge in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal) (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The minimum amount is $0.50 US or [equivalent in charge currency](https://stripe.com/docs/currencies#minimum-and-maximum-charge-amounts). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99).
        """
        currency: str
        """
        Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
        """

    class ListParams(RequestOptions):
        attach_to_self: NotRequired[bool]
        """
        If present, the SetupIntent's payment method will be attached to the in-context Stripe Account.

        It can only be used for this Stripe Account's own money movement flows like InboundTransfer and OutboundTransfers. It cannot be set to true when setting up a PaymentMethod for a Customer, and defaults to false when attaching a PaymentMethod to a Customer.
        """
        created: NotRequired["SetupIntent.ListParamsCreated|int"]
        """
        A filter on the list, based on the object `created` field. The value can be a string with an integer Unix timestamp, or it can be a dictionary with a number of different query options.
        """
        customer: NotRequired[str]
        """
        Only return SetupIntents for the customer specified by this customer ID.
        """
        customer_account: NotRequired[str]
        """
        Only return SetupIntents for the account specified by this customer ID.
        """
        ending_before: NotRequired[str]
        """
        A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
        """
        expand: NotRequired[List[str]]
        """
        Specifies which fields in the response should be expanded.
        """
        limit: NotRequired[int]
        """
        A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
        """
        payment_method: NotRequired[str]
        """
        Only return SetupIntents that associate with the specified payment method.
        """
        starting_after: NotRequired[str]
        """
        A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
        """

    class ListParamsCreated(TypedDict):
        gt: NotRequired[int]
        """
        Minimum value to filter by (exclusive)
        """
        gte: NotRequired[int]
        """
        Minimum value to filter by (inclusive)
        """
        lt: NotRequired[int]
        """
        Maximum value to filter by (exclusive)
        """
        lte: NotRequired[int]
        """
        Maximum value to filter by (inclusive)
        """

    class ModifyParams(RequestOptions):
        attach_to_self: NotRequired[bool]
        """
        If present, the SetupIntent's payment method will be attached to the in-context Stripe Account.

        It can only be used for this Stripe Account's own money movement flows like InboundTransfer and OutboundTransfers. It cannot be set to true when setting up a PaymentMethod for a Customer, and defaults to false when attaching a PaymentMethod to a Customer.
        """
        customer: NotRequired[str]
        """
        ID of the Customer this SetupIntent belongs to, if one exists.

        If present, the SetupIntent's payment method will be attached to the Customer on successful setup. Payment methods attached to other Customers cannot be used with this SetupIntent.
        """
        customer_account: NotRequired[str]
        """
        ID of the Account this SetupIntent belongs to, if one exists.

        If present, the SetupIntent's payment method will be attached to the Account on successful setup. Payment methods attached to other Accounts cannot be used with this SetupIntent.
        """
        description: NotRequired[str]
        """
        An arbitrary string attached to the object. Often useful for displaying to users.
        """
        expand: NotRequired[List[str]]
        """
        Specifies which fields in the response should be expanded.
        """
        flow_directions: NotRequired[List[Literal["inbound", "outbound"]]]
        """
        Indicates the directions of money movement for which this payment method is intended to be used.

        Include `inbound` if you intend to use the payment method as the origin to pull funds from. Include `outbound` if you intend to use the payment method as the destination to send funds to. You can include both if you intend to use the payment method for both purposes.
        """
        metadata: NotRequired["Literal['']|Dict[str, str]"]
        """
        Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
        """
        payment_method: NotRequired[str]
        """
        ID of the payment method (a PaymentMethod, Card, or saved Source object) to attach to this SetupIntent. To unset this field to null, pass in an empty string.
        """
        payment_method_configuration: NotRequired[str]
        """
        The ID of the [payment method configuration](https://stripe.com/docs/api/payment_method_configurations) to use with this SetupIntent.
        """
        payment_method_data: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodData"
        ]
        """
        When included, this hash creates a PaymentMethod that is set as the [`payment_method`](https://stripe.com/docs/api/setup_intents/object#setup_intent_object-payment_method)
        value in the SetupIntent.
        """
        payment_method_options: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptions"
        ]
        """
        Payment method-specific configuration for this SetupIntent.
        """
        payment_method_types: NotRequired[List[str]]
        """
        The list of payment method types (for example, card) that this SetupIntent can set up. If you don't provide this, Stripe will dynamically show relevant payment methods from your [payment method settings](https://dashboard.stripe.com/settings/payment_methods).
        """

    class ModifyParamsPaymentMethodData(TypedDict):
        acss_debit: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataAcssDebit"
        ]
        """
        If this is an `acss_debit` PaymentMethod, this hash contains details about the ACSS Debit payment method.
        """
        affirm: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataAffirm"]
        """
        If this is an `affirm` PaymentMethod, this hash contains details about the Affirm payment method.
        """
        afterpay_clearpay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataAfterpayClearpay"
        ]
        """
        If this is an `AfterpayClearpay` PaymentMethod, this hash contains details about the AfterpayClearpay payment method.
        """
        alipay: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataAlipay"]
        """
        If this is an `Alipay` PaymentMethod, this hash contains details about the Alipay payment method.
        """
        allow_redisplay: NotRequired[
            Literal["always", "limited", "unspecified"]
        ]
        """
        This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to `unspecified`.
        """
        alma: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataAlma"]
        """
        If this is a Alma PaymentMethod, this hash contains details about the Alma payment method.
        """
        amazon_pay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataAmazonPay"
        ]
        """
        If this is a AmazonPay PaymentMethod, this hash contains details about the AmazonPay payment method.
        """
        au_becs_debit: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataAuBecsDebit"
        ]
        """
        If this is an `au_becs_debit` PaymentMethod, this hash contains details about the bank account.
        """
        bacs_debit: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataBacsDebit"
        ]
        """
        If this is a `bacs_debit` PaymentMethod, this hash contains details about the Bacs Direct Debit bank account.
        """
        bancontact: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataBancontact"
        ]
        """
        If this is a `bancontact` PaymentMethod, this hash contains details about the Bancontact payment method.
        """
        billie: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataBillie"]
        """
        If this is a `billie` PaymentMethod, this hash contains details about the Billie payment method.
        """
        billing_details: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataBillingDetails"
        ]
        """
        Billing information associated with the PaymentMethod that may be used or required by particular types of payment methods.
        """
        blik: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataBlik"]
        """
        If this is a `blik` PaymentMethod, this hash contains details about the BLIK payment method.
        """
        boleto: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataBoleto"]
        """
        If this is a `boleto` PaymentMethod, this hash contains details about the Boleto payment method.
        """
        cashapp: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataCashapp"
        ]
        """
        If this is a `cashapp` PaymentMethod, this hash contains details about the Cash App Pay payment method.
        """
        customer_balance: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataCustomerBalance"
        ]
        """
        If this is a `customer_balance` PaymentMethod, this hash contains details about the CustomerBalance payment method.
        """
        eps: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataEps"]
        """
        If this is an `eps` PaymentMethod, this hash contains details about the EPS payment method.
        """
        fpx: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataFpx"]
        """
        If this is an `fpx` PaymentMethod, this hash contains details about the FPX payment method.
        """
        giropay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataGiropay"
        ]
        """
        If this is a `giropay` PaymentMethod, this hash contains details about the Giropay payment method.
        """
        gopay: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataGopay"]
        """
        If this is a Gopay PaymentMethod, this hash contains details about the Gopay payment method.
        """
        grabpay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataGrabpay"
        ]
        """
        If this is a `grabpay` PaymentMethod, this hash contains details about the GrabPay payment method.
        """
        id_bank_transfer: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataIdBankTransfer"
        ]
        """
        If this is an `IdBankTransfer` PaymentMethod, this hash contains details about the IdBankTransfer payment method.
        """
        ideal: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataIdeal"]
        """
        If this is an `ideal` PaymentMethod, this hash contains details about the iDEAL payment method.
        """
        interac_present: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataInteracPresent"
        ]
        """
        If this is an `interac_present` PaymentMethod, this hash contains details about the Interac Present payment method.
        """
        kakao_pay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataKakaoPay"
        ]
        """
        If this is a `kakao_pay` PaymentMethod, this hash contains details about the Kakao Pay payment method.
        """
        klarna: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataKlarna"]
        """
        If this is a `klarna` PaymentMethod, this hash contains details about the Klarna payment method.
        """
        konbini: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataKonbini"
        ]
        """
        If this is a `konbini` PaymentMethod, this hash contains details about the Konbini payment method.
        """
        kr_card: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataKrCard"]
        """
        If this is a `kr_card` PaymentMethod, this hash contains details about the Korean Card payment method.
        """
        link: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataLink"]
        """
        If this is an `Link` PaymentMethod, this hash contains details about the Link payment method.
        """
        mb_way: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataMbWay"]
        """
        If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
        """
        metadata: NotRequired[Dict[str, str]]
        """
        Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
        """
        mobilepay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataMobilepay"
        ]
        """
        If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
        """
        multibanco: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataMultibanco"
        ]
        """
        If this is a `multibanco` PaymentMethod, this hash contains details about the Multibanco payment method.
        """
        naver_pay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataNaverPay"
        ]
        """
        If this is a `naver_pay` PaymentMethod, this hash contains details about the Naver Pay payment method.
        """
        nz_bank_account: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataNzBankAccount"
        ]
        """
        If this is an nz_bank_account PaymentMethod, this hash contains details about the nz_bank_account payment method.
        """
        oxxo: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataOxxo"]
        """
        If this is an `oxxo` PaymentMethod, this hash contains details about the OXXO payment method.
        """
        p24: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataP24"]
        """
        If this is a `p24` PaymentMethod, this hash contains details about the P24 payment method.
        """
        pay_by_bank: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataPayByBank"
        ]
        """
        If this is a `pay_by_bank` PaymentMethod, this hash contains details about the PayByBank payment method.
        """
        payco: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataPayco"]
        """
        If this is a `payco` PaymentMethod, this hash contains details about the PAYCO payment method.
        """
        paynow: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataPaynow"]
        """
        If this is a `paynow` PaymentMethod, this hash contains details about the PayNow payment method.
        """
        paypal: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataPaypal"]
        """
        If this is a `paypal` PaymentMethod, this hash contains details about the PayPal payment method.
        """
        payto: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataPayto"]
        """
        If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
        """
        pix: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataPix"]
        """
        If this is a `pix` PaymentMethod, this hash contains details about the Pix payment method.
        """
        promptpay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataPromptpay"
        ]
        """
        If this is a `promptpay` PaymentMethod, this hash contains details about the PromptPay payment method.
        """
        qris: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataQris"]
        """
        If this is a `qris` PaymentMethod, this hash contains details about the QRIS payment method.
        """
        radar_options: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataRadarOptions"
        ]
        """
        Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information.
        """
        rechnung: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataRechnung"
        ]
        """
        If this is a `rechnung` PaymentMethod, this hash contains details about the Rechnung payment method.
        """
        revolut_pay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataRevolutPay"
        ]
        """
        If this is a `revolut_pay` PaymentMethod, this hash contains details about the Revolut Pay payment method.
        """
        samsung_pay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataSamsungPay"
        ]
        """
        If this is a `samsung_pay` PaymentMethod, this hash contains details about the SamsungPay payment method.
        """
        satispay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataSatispay"
        ]
        """
        If this is a `satispay` PaymentMethod, this hash contains details about the Satispay payment method.
        """
        sepa_debit: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataSepaDebit"
        ]
        """
        If this is a `sepa_debit` PaymentMethod, this hash contains details about the SEPA debit bank account.
        """
        shopeepay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataShopeepay"
        ]
        """
        If this is a Shopeepay PaymentMethod, this hash contains details about the Shopeepay payment method.
        """
        sofort: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataSofort"]
        """
        If this is a `sofort` PaymentMethod, this hash contains details about the SOFORT payment method.
        """
        stripe_balance: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataStripeBalance"
        ]
        """
        This hash contains details about the Stripe balance payment method.
        """
        swish: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataSwish"]
        """
        If this is a `swish` PaymentMethod, this hash contains details about the Swish payment method.
        """
        twint: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataTwint"]
        """
        If this is a TWINT PaymentMethod, this hash contains details about the TWINT payment method.
        """
        type: Literal[
            "acss_debit",
            "affirm",
            "afterpay_clearpay",
            "alipay",
            "alma",
            "amazon_pay",
            "au_becs_debit",
            "bacs_debit",
            "bancontact",
            "billie",
            "blik",
            "boleto",
            "cashapp",
            "customer_balance",
            "eps",
            "fpx",
            "giropay",
            "gopay",
            "grabpay",
            "id_bank_transfer",
            "ideal",
            "kakao_pay",
            "klarna",
            "konbini",
            "kr_card",
            "link",
            "mb_way",
            "mobilepay",
            "multibanco",
            "naver_pay",
            "nz_bank_account",
            "oxxo",
            "p24",
            "pay_by_bank",
            "payco",
            "paynow",
            "paypal",
            "payto",
            "pix",
            "promptpay",
            "qris",
            "rechnung",
            "revolut_pay",
            "samsung_pay",
            "satispay",
            "sepa_debit",
            "shopeepay",
            "sofort",
            "stripe_balance",
            "swish",
            "twint",
            "us_bank_account",
            "wechat_pay",
            "zip",
        ]
        """
        The type of the PaymentMethod. An additional hash is included on the PaymentMethod with a name matching this value. It contains additional information specific to the PaymentMethod type.
        """
        us_bank_account: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataUsBankAccount"
        ]
        """
        If this is an `us_bank_account` PaymentMethod, this hash contains details about the US bank account payment method.
        """
        wechat_pay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodDataWechatPay"
        ]
        """
        If this is an `wechat_pay` PaymentMethod, this hash contains details about the wechat_pay payment method.
        """
        zip: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataZip"]
        """
        If this is a `zip` PaymentMethod, this hash contains details about the Zip payment method.
        """

    class ModifyParamsPaymentMethodDataAcssDebit(TypedDict):
        account_number: str
        """
        Customer's bank account number.
        """
        institution_number: str
        """
        Institution number of the customer's bank.
        """
        transit_number: str
        """
        Transit number of the customer's bank.
        """

    class ModifyParamsPaymentMethodDataAffirm(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataAfterpayClearpay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataAlipay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataAlma(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataAmazonPay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataAuBecsDebit(TypedDict):
        account_number: str
        """
        The account number for the bank account.
        """
        bsb_number: str
        """
        Bank-State-Branch number of the bank account.
        """

    class ModifyParamsPaymentMethodDataBacsDebit(TypedDict):
        account_number: NotRequired[str]
        """
        Account number of the bank account that the funds will be debited from.
        """
        sort_code: NotRequired[str]
        """
        Sort code of the bank account. (e.g., `10-20-30`)
        """

    class ModifyParamsPaymentMethodDataBancontact(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataBillie(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataBillingDetails(TypedDict):
        address: NotRequired[
            "Literal['']|SetupIntent.ModifyParamsPaymentMethodDataBillingDetailsAddress"
        ]
        """
        Billing address.
        """
        email: NotRequired["Literal['']|str"]
        """
        Email address.
        """
        name: NotRequired["Literal['']|str"]
        """
        Full name.
        """
        phone: NotRequired["Literal['']|str"]
        """
        Billing phone number (including extension).
        """
        tax_id: NotRequired[str]
        """
        Taxpayer identification number. Used only for transactions between LATAM buyers and non-LATAM sellers.
        """

    class ModifyParamsPaymentMethodDataBillingDetailsAddress(TypedDict):
        city: NotRequired[str]
        """
        City, district, suburb, town, or village.
        """
        country: NotRequired[str]
        """
        Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
        """
        line1: NotRequired[str]
        """
        Address line 1 (e.g., street, PO Box, or company name).
        """
        line2: NotRequired[str]
        """
        Address line 2 (e.g., apartment, suite, unit, or building).
        """
        postal_code: NotRequired[str]
        """
        ZIP or postal code.
        """
        state: NotRequired[str]
        """
        State, county, province, or region.
        """

    class ModifyParamsPaymentMethodDataBlik(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataBoleto(TypedDict):
        tax_id: str
        """
        The tax ID of the customer (CPF for individual consumers or CNPJ for businesses consumers)
        """

    class ModifyParamsPaymentMethodDataCashapp(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataCustomerBalance(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataEps(TypedDict):
        bank: NotRequired[
            Literal[
                "arzte_und_apotheker_bank",
                "austrian_anadi_bank_ag",
                "bank_austria",
                "bankhaus_carl_spangler",
                "bankhaus_schelhammer_und_schattera_ag",
                "bawag_psk_ag",
                "bks_bank_ag",
                "brull_kallmus_bank_ag",
                "btv_vier_lander_bank",
                "capital_bank_grawe_gruppe_ag",
                "deutsche_bank_ag",
                "dolomitenbank",
                "easybank_ag",
                "erste_bank_und_sparkassen",
                "hypo_alpeadriabank_international_ag",
                "hypo_bank_burgenland_aktiengesellschaft",
                "hypo_noe_lb_fur_niederosterreich_u_wien",
                "hypo_oberosterreich_salzburg_steiermark",
                "hypo_tirol_bank_ag",
                "hypo_vorarlberg_bank_ag",
                "marchfelder_bank",
                "oberbank_ag",
                "raiffeisen_bankengruppe_osterreich",
                "schoellerbank_ag",
                "sparda_bank_wien",
                "volksbank_gruppe",
                "volkskreditbank_ag",
                "vr_bank_braunau",
            ]
        ]
        """
        The customer's bank.
        """

    class ModifyParamsPaymentMethodDataFpx(TypedDict):
        account_holder_type: NotRequired[Literal["company", "individual"]]
        """
        Account holder type for FPX transaction
        """
        bank: Literal[
            "affin_bank",
            "agrobank",
            "alliance_bank",
            "ambank",
            "bank_islam",
            "bank_muamalat",
            "bank_of_china",
            "bank_rakyat",
            "bsn",
            "cimb",
            "deutsche_bank",
            "hong_leong_bank",
            "hsbc",
            "kfh",
            "maybank2e",
            "maybank2u",
            "ocbc",
            "pb_enterprise",
            "public_bank",
            "rhb",
            "standard_chartered",
            "uob",
        ]
        """
        The customer's bank.
        """

    class ModifyParamsPaymentMethodDataGiropay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataGopay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataGrabpay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataIdBankTransfer(TypedDict):
        bank: NotRequired[Literal["bca", "bni", "bri", "cimb", "permata"]]
        """
        Bank where the account is held.
        """

    class ModifyParamsPaymentMethodDataIdeal(TypedDict):
        bank: NotRequired[
            Literal[
                "abn_amro",
                "asn_bank",
                "bunq",
                "handelsbanken",
                "ing",
                "knab",
                "moneyou",
                "n26",
                "nn",
                "rabobank",
                "regiobank",
                "revolut",
                "sns_bank",
                "triodos_bank",
                "van_lanschot",
                "yoursafe",
            ]
        ]
        """
        The customer's bank. Only use this parameter for existing customers. Don't use it for new customers.
        """

    class ModifyParamsPaymentMethodDataInteracPresent(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataKakaoPay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataKlarna(TypedDict):
        dob: NotRequired["SetupIntent.ModifyParamsPaymentMethodDataKlarnaDob"]
        """
        Customer's date of birth
        """

    class ModifyParamsPaymentMethodDataKlarnaDob(TypedDict):
        day: int
        """
        The day of birth, between 1 and 31.
        """
        month: int
        """
        The month of birth, between 1 and 12.
        """
        year: int
        """
        The four-digit year of birth.
        """

    class ModifyParamsPaymentMethodDataKonbini(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataKrCard(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataLink(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataMbWay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataMobilepay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataMultibanco(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataNaverPay(TypedDict):
        funding: NotRequired[Literal["card", "points"]]
        """
        Whether to use Naver Pay points or a card to fund this transaction. If not provided, this defaults to `card`.
        """

    class ModifyParamsPaymentMethodDataNzBankAccount(TypedDict):
        account_holder_name: NotRequired[str]
        """
        The name on the bank account. Only required if the account holder name is different from the name of the authorized signatory collected in the PaymentMethod's billing details.
        """
        account_number: str
        """
        The account number for the bank account.
        """
        bank_code: str
        """
        The numeric code for the bank account's bank.
        """
        branch_code: str
        """
        The numeric code for the bank account's bank branch.
        """
        reference: NotRequired[str]
        suffix: str
        """
        The suffix of the bank account number.
        """

    class ModifyParamsPaymentMethodDataOxxo(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataP24(TypedDict):
        bank: NotRequired[
            Literal[
                "alior_bank",
                "bank_millennium",
                "bank_nowy_bfg_sa",
                "bank_pekao_sa",
                "banki_spbdzielcze",
                "blik",
                "bnp_paribas",
                "boz",
                "citi_handlowy",
                "credit_agricole",
                "envelobank",
                "etransfer_pocztowy24",
                "getin_bank",
                "ideabank",
                "ing",
                "inteligo",
                "mbank_mtransfer",
                "nest_przelew",
                "noble_pay",
                "pbac_z_ipko",
                "plus_bank",
                "santander_przelew24",
                "tmobile_usbugi_bankowe",
                "toyota_bank",
                "velobank",
                "volkswagen_bank",
            ]
        ]
        """
        The customer's bank.
        """

    class ModifyParamsPaymentMethodDataPayByBank(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataPayco(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataPaynow(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataPaypal(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataPayto(TypedDict):
        account_number: NotRequired[str]
        """
        The account number for the bank account.
        """
        bsb_number: NotRequired[str]
        """
        Bank-State-Branch number of the bank account.
        """
        pay_id: NotRequired[str]
        """
        The PayID alias for the bank account.
        """

    class ModifyParamsPaymentMethodDataPix(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataPromptpay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataQris(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataRadarOptions(TypedDict):
        session: NotRequired[str]
        """
        A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
        """

    class ModifyParamsPaymentMethodDataRechnung(TypedDict):
        dob: "SetupIntent.ModifyParamsPaymentMethodDataRechnungDob"
        """
        Customer's date of birth
        """

    class ModifyParamsPaymentMethodDataRechnungDob(TypedDict):
        day: int
        """
        The day of birth, between 1 and 31.
        """
        month: int
        """
        The month of birth, between 1 and 12.
        """
        year: int
        """
        The four-digit year of birth.
        """

    class ModifyParamsPaymentMethodDataRevolutPay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataSamsungPay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataSatispay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataSepaDebit(TypedDict):
        iban: str
        """
        IBAN of the bank account.
        """

    class ModifyParamsPaymentMethodDataShopeepay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataSofort(TypedDict):
        country: Literal["AT", "BE", "DE", "ES", "IT", "NL"]
        """
        Two-letter ISO code representing the country the bank account is located in.
        """

    class ModifyParamsPaymentMethodDataStripeBalance(TypedDict):
        account: NotRequired[str]
        """
        The connected account ID whose Stripe balance to use as the source of payment
        """
        source_type: NotRequired[Literal["bank_account", "card", "fpx"]]
        """
        The [source_type](https://docs.stripe.com/api/balance/balance_object#balance_object-available-source_types) of the balance
        """

    class ModifyParamsPaymentMethodDataSwish(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataTwint(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataUsBankAccount(TypedDict):
        account_holder_type: NotRequired[Literal["company", "individual"]]
        """
        Account holder type: individual or company.
        """
        account_number: NotRequired[str]
        """
        Account number of the bank account.
        """
        account_type: NotRequired[Literal["checking", "savings"]]
        """
        Account type: checkings or savings. Defaults to checking if omitted.
        """
        financial_connections_account: NotRequired[str]
        """
        The ID of a Financial Connections Account to use as a payment method.
        """
        routing_number: NotRequired[str]
        """
        Routing number of the bank account.
        """

    class ModifyParamsPaymentMethodDataWechatPay(TypedDict):
        pass

    class ModifyParamsPaymentMethodDataZip(TypedDict):
        pass

    class ModifyParamsPaymentMethodOptions(TypedDict):
        acss_debit: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsAcssDebit"
        ]
        """
        If this is a `acss_debit` SetupIntent, this sub-hash contains details about the ACSS Debit payment method options.
        """
        amazon_pay: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsAmazonPay"
        ]
        """
        If this is a `amazon_pay` SetupIntent, this sub-hash contains details about the AmazonPay payment method options.
        """
        bacs_debit: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsBacsDebit"
        ]
        """
        If this is a `bacs_debit` SetupIntent, this sub-hash contains details about the Bacs Debit payment method options.
        """
        card: NotRequired["SetupIntent.ModifyParamsPaymentMethodOptionsCard"]
        """
        Configuration for any card setup attempted on this SetupIntent.
        """
        card_present: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsCardPresent"
        ]
        """
        If this is a `card_present` PaymentMethod, this sub-hash contains details about the card-present payment method options.
        """
        link: NotRequired["SetupIntent.ModifyParamsPaymentMethodOptionsLink"]
        """
        If this is a `link` PaymentMethod, this sub-hash contains details about the Link payment method options.
        """
        paypal: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsPaypal"
        ]
        """
        If this is a `paypal` PaymentMethod, this sub-hash contains details about the PayPal payment method options.
        """
        payto: NotRequired["SetupIntent.ModifyParamsPaymentMethodOptionsPayto"]
        """
        If this is a `payto` SetupIntent, this sub-hash contains details about the PayTo payment method options.
        """
        sepa_debit: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsSepaDebit"
        ]
        """
        If this is a `sepa_debit` SetupIntent, this sub-hash contains details about the SEPA Debit payment method options.
        """
        us_bank_account: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsUsBankAccount"
        ]
        """
        If this is a `us_bank_account` SetupIntent, this sub-hash contains details about the US bank account payment method options.
        """

    class ModifyParamsPaymentMethodOptionsAcssDebit(TypedDict):
        currency: NotRequired[Literal["cad", "usd"]]
        """
        Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
        """
        mandate_options: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsAcssDebitMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """
        verification_method: NotRequired[
            Literal["automatic", "instant", "microdeposits"]
        ]
        """
        Bank account verification method.
        """

    class ModifyParamsPaymentMethodOptionsAcssDebitMandateOptions(TypedDict):
        custom_mandate_url: NotRequired["Literal['']|str"]
        """
        A URL for custom mandate text to render during confirmation step.
        The URL will be rendered with additional GET parameters `payment_intent` and `payment_intent_client_secret` when confirming a Payment Intent,
        or `setup_intent` and `setup_intent_client_secret` when confirming a Setup Intent.
        """
        default_for: NotRequired[List[Literal["invoice", "subscription"]]]
        """
        List of Stripe products where this mandate can be selected automatically.
        """
        interval_description: NotRequired[str]
        """
        Description of the mandate interval. Only required if 'payment_schedule' parameter is 'interval' or 'combined'.
        """
        payment_schedule: NotRequired[
            Literal["combined", "interval", "sporadic"]
        ]
        """
        Payment schedule for the mandate.
        """
        transaction_type: NotRequired[Literal["business", "personal"]]
        """
        Transaction type of the mandate.
        """

    class ModifyParamsPaymentMethodOptionsAmazonPay(TypedDict):
        pass

    class ModifyParamsPaymentMethodOptionsBacsDebit(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsBacsDebitMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """

    class ModifyParamsPaymentMethodOptionsBacsDebitMandateOptions(TypedDict):
        reference_prefix: NotRequired["Literal['']|str"]
        """
        Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'DDIC' or 'STRIPE'.
        """

    class ModifyParamsPaymentMethodOptionsCard(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsCardMandateOptions"
        ]
        """
        Configuration options for setting up an eMandate for cards issued in India.
        """
        moto: NotRequired[bool]
        """
        When specified, this parameter signals that a card has been collected
        as MOTO (Mail Order Telephone Order) and thus out of scope for SCA. This
        parameter can only be provided during confirmation.
        """
        network: NotRequired[
            Literal[
                "amex",
                "cartes_bancaires",
                "diners",
                "discover",
                "eftpos_au",
                "girocard",
                "interac",
                "jcb",
                "link",
                "mastercard",
                "unionpay",
                "unknown",
                "visa",
            ]
        ]
        """
        Selected network to process this SetupIntent on. Depends on the available networks of the card attached to the SetupIntent. Can be only set confirm-time.
        """
        request_three_d_secure: NotRequired[
            Literal["any", "automatic", "challenge"]
        ]
        """
        We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://stripe.com/docs/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. If not provided, this value defaults to `automatic`. Read our guide on [manually requesting 3D Secure](https://stripe.com/docs/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
        """
        three_d_secure: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsCardThreeDSecure"
        ]
        """
        If 3D Secure authentication was performed with a third-party provider,
        the authentication details to use for this setup.
        """

    class ModifyParamsPaymentMethodOptionsCardMandateOptions(TypedDict):
        amount: int
        """
        Amount to be charged for future payments.
        """
        amount_type: Literal["fixed", "maximum"]
        """
        One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
        """
        currency: str
        """
        Currency in which future payments will be charged. Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
        """
        description: NotRequired[str]
        """
        A description of the mandate or subscription that is meant to be displayed to the customer.
        """
        end_date: NotRequired[int]
        """
        End date of the mandate or subscription. If not provided, the mandate will be active until canceled. If provided, end date should be after start date.
        """
        interval: Literal["day", "month", "sporadic", "week", "year"]
        """
        Specifies payment frequency. One of `day`, `week`, `month`, `year`, or `sporadic`.
        """
        interval_count: NotRequired[int]
        """
        The number of intervals between payments. For example, `interval=month` and `interval_count=3` indicates one payment every three months. Maximum of one year interval allowed (1 year, 12 months, or 52 weeks). This parameter is optional when `interval=sporadic`.
        """
        reference: str
        """
        Unique identifier for the mandate or subscription.
        """
        start_date: int
        """
        Start date of the mandate or subscription. Start date should not be lesser than yesterday.
        """
        supported_types: NotRequired[List[Literal["india"]]]
        """
        Specifies the type of mandates supported. Possible values are `india`.
        """

    class ModifyParamsPaymentMethodOptionsCardPresent(TypedDict):
        pass

    class ModifyParamsPaymentMethodOptionsCardThreeDSecure(TypedDict):
        ares_trans_status: NotRequired[
            Literal["A", "C", "I", "N", "R", "U", "Y"]
        ]
        """
        The `transStatus` returned from the card Issuer's ACS in the ARes.
        """
        cryptogram: NotRequired[str]
        """
        The cryptogram, also known as the "authentication value" (AAV, CAVV or
        AEVV). This value is 20 bytes, base64-encoded into a 28-character string.
        (Most 3D Secure providers will return the base64-encoded version, which
        is what you should specify here.)
        """
        electronic_commerce_indicator: NotRequired[
            Literal["01", "02", "05", "06", "07"]
        ]
        """
        The Electronic Commerce Indicator (ECI) is returned by your 3D Secure
        provider and indicates what degree of authentication was performed.
        """
        network_options: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsCardThreeDSecureNetworkOptions"
        ]
        """
        Network specific 3DS fields. Network specific arguments require an
        explicit card brand choice. The parameter `payment_method_options.card.network``
        must be populated accordingly
        """
        requestor_challenge_indicator: NotRequired[str]
        """
        The challenge indicator (`threeDSRequestorChallengeInd`) which was requested in the
        AReq sent to the card Issuer's ACS. A string containing 2 digits from 01-99.
        """
        transaction_id: NotRequired[str]
        """
        For 3D Secure 1, the XID. For 3D Secure 2, the Directory Server
        Transaction ID (dsTransID).
        """
        version: NotRequired[Literal["1.0.2", "2.1.0", "2.2.0"]]
        """
        The version of 3D Secure that was performed.
        """

    class ModifyParamsPaymentMethodOptionsCardThreeDSecureNetworkOptions(
        TypedDict,
    ):
        cartes_bancaires: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsCardThreeDSecureNetworkOptionsCartesBancaires"
        ]
        """
        Cartes Bancaires-specific 3DS fields.
        """

    class ModifyParamsPaymentMethodOptionsCardThreeDSecureNetworkOptionsCartesBancaires(
        TypedDict,
    ):
        cb_avalgo: Literal["0", "1", "2", "3", "4", "A"]
        """
        The cryptogram calculation algorithm used by the card Issuer's ACS
        to calculate the Authentication cryptogram. Also known as `cavvAlgorithm`.
        messageExtension: CB-AVALGO
        """
        cb_exemption: NotRequired[str]
        """
        The exemption indicator returned from Cartes Bancaires in the ARes.
        message extension: CB-EXEMPTION; string (4 characters)
        This is a 3 byte bitmap (low significant byte first and most significant
        bit first) that has been Base64 encoded
        """
        cb_score: NotRequired[int]
        """
        The risk score returned from Cartes Bancaires in the ARes.
        message extension: CB-SCORE; numeric value 0-99
        """

    class ModifyParamsPaymentMethodOptionsLink(TypedDict):
        persistent_token: NotRequired[str]
        """
        [Deprecated] This is a legacy parameter that no longer has any function.
        """

    class ModifyParamsPaymentMethodOptionsPaypal(TypedDict):
        billing_agreement_id: NotRequired[str]
        """
        The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
        """
        currency: NotRequired[str]
        subsellers: NotRequired[List[str]]
        """
        The Stripe connected account IDs of the sellers on the platform for this transaction (optional). Only allowed when [separate charges and transfers](https://stripe.com/docs/connect/separate-charges-and-transfers) are used.
        """

    class ModifyParamsPaymentMethodOptionsPayto(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsPaytoMandateOptions"
        ]
        """
        Additional fields for Mandate creation.
        """

    class ModifyParamsPaymentMethodOptionsPaytoMandateOptions(TypedDict):
        amount: NotRequired[int]
        """
        Amount that will be collected. It is required when `amount_type` is `fixed`.
        """
        amount_type: NotRequired[Literal["fixed", "maximum"]]
        """
        The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively.
        """
        end_date: NotRequired[str]
        """
        Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
        """
        payment_schedule: NotRequired[
            Literal[
                "adhoc",
                "annual",
                "daily",
                "fortnightly",
                "monthly",
                "quarterly",
                "semi_annual",
                "weekly",
            ]
        ]
        """
        The periodicity at which payments will be collected.
        """
        payments_per_period: NotRequired[int]
        """
        The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
        """
        purpose: NotRequired[
            Literal[
                "dependant_support",
                "government",
                "loan",
                "mortgage",
                "other",
                "pension",
                "personal",
                "retail",
                "salary",
                "tax",
                "utility",
            ]
        ]
        """
        The purpose for which payments are made. Defaults to retail.
        """
        start_date: NotRequired[str]
        """
        Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
        """

    class ModifyParamsPaymentMethodOptionsSepaDebit(TypedDict):
        mandate_options: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsSepaDebitMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """

    class ModifyParamsPaymentMethodOptionsSepaDebitMandateOptions(TypedDict):
        reference_prefix: NotRequired["Literal['']|str"]
        """
        Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'STRIPE'.
        """

    class ModifyParamsPaymentMethodOptionsUsBankAccount(TypedDict):
        financial_connections: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsUsBankAccountFinancialConnections"
        ]
        """
        Additional fields for Financial Connections Session creation
        """
        mandate_options: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsUsBankAccountMandateOptions"
        ]
        """
        Additional fields for Mandate creation
        """
        networks: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsUsBankAccountNetworks"
        ]
        """
        Additional fields for network related functions
        """
        verification_method: NotRequired[
            Literal["automatic", "instant", "microdeposits"]
        ]
        """
        Bank account verification method.
        """

    class ModifyParamsPaymentMethodOptionsUsBankAccountFinancialConnections(
        TypedDict,
    ):
        filters: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsFilters"
        ]
        """
        Provide filters for the linked accounts that the customer can select for the payment method.
        """
        manual_entry: NotRequired[
            "SetupIntent.ModifyParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsManualEntry"
        ]
        """
        Customize manual entry behavior
        """
        permissions: NotRequired[
            List[
                Literal[
                    "balances", "ownership", "payment_method", "transactions"
                ]
            ]
        ]
        """
        The list of permissions to request. If this parameter is passed, the `payment_method` permission must be included. Valid permissions include: `balances`, `ownership`, `payment_method`, and `transactions`.
        """
        prefetch: NotRequired[
            List[
                Literal[
                    "balances",
                    "inferred_balances",
                    "ownership",
                    "transactions",
                ]
            ]
        ]
        """
        List of data features that you would like to retrieve upon account creation.
        """
        return_url: NotRequired[str]
        """
        For webview integrations only. Upon completing OAuth login in the native browser, the user will be redirected to this URL to return to your app.
        """

    class ModifyParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsFilters(
        TypedDict,
    ):
        account_subcategories: NotRequired[
            List[Literal["checking", "savings"]]
        ]
        """
        The account subcategories to use to filter for selectable accounts. Valid subcategories are `checking` and `savings`.
        """
        institution: NotRequired[str]
        """
        ID of the institution to use to filter for selectable accounts.
        """

    class ModifyParamsPaymentMethodOptionsUsBankAccountFinancialConnectionsManualEntry(
        TypedDict,
    ):
        mode: Literal["automatic", "custom"]
        """
        Settings for configuring manual entry of account details.
        """

    class ModifyParamsPaymentMethodOptionsUsBankAccountMandateOptions(
        TypedDict,
    ):
        collection_method: NotRequired["Literal['']|Literal['paper']"]
        """
        The method used to collect offline mandate customer acceptance.
        """

    class ModifyParamsPaymentMethodOptionsUsBankAccountNetworks(TypedDict):
        requested: NotRequired[List[Literal["ach", "us_domestic_wire"]]]
        """
        Triggers validations to run across the selected networks
        """

    class RetrieveParams(RequestOptions):
        client_secret: NotRequired[str]
        """
        The client secret of the SetupIntent. We require this string if you use a publishable key to retrieve the SetupIntent.
        """
        expand: NotRequired[List[str]]
        """
        Specifies which fields in the response should be expanded.
        """

    class VerifyMicrodepositsParams(RequestOptions):
        amounts: NotRequired[List[int]]
        """
        Two positive integers, in *cents*, equal to the values of the microdeposits sent to the bank account.
        """
        descriptor_code: NotRequired[str]
        """
        A six-character code starting with SM present in the microdeposit sent to the bank account.
        """
        expand: NotRequired[List[str]]
        """
        Specifies which fields in the response should be expanded.
        """

    application: Optional[ExpandableField["Application"]]
    """
    ID of the Connect application that created the SetupIntent.
    """
    attach_to_self: Optional[bool]
    """
    If present, the SetupIntent's payment method will be attached to the in-context Stripe Account.

    It can only be used for this Stripe Account's own money movement flows like InboundTransfer and OutboundTransfers. It cannot be set to true when setting up a PaymentMethod for a Customer, and defaults to false when attaching a PaymentMethod to a Customer.
    """
    automatic_payment_methods: Optional[AutomaticPaymentMethods]
    """
    Settings for dynamic payment methods compatible with this Setup Intent
    """
    cancellation_reason: Optional[
        Literal["abandoned", "duplicate", "requested_by_customer"]
    ]
    """
    Reason for cancellation of this SetupIntent, one of `abandoned`, `requested_by_customer`, or `duplicate`.
    """
    client_secret: Optional[str]
    """
    The client secret of this SetupIntent. Used for client-side retrieval using a publishable key.

    The client secret can be used to complete payment setup from your frontend. It should not be stored, logged, or exposed to anyone other than the customer. Make sure that you have TLS enabled on any page that includes the client secret.
    """
    created: int
    """
    Time at which the object was created. Measured in seconds since the Unix epoch.
    """
    customer: Optional[ExpandableField["Customer"]]
    """
    ID of the Customer this SetupIntent belongs to, if one exists.

    If present, the SetupIntent's payment method will be attached to the Customer on successful setup. Payment methods attached to other Customers cannot be used with this SetupIntent.
    """
    customer_account: Optional[str]
    """
    ID of the Account this SetupIntent belongs to, if one exists.

    If present, the SetupIntent's payment method will be attached to the Account on successful setup. Payment methods attached to other Accounts cannot be used with this SetupIntent.
    """
    description: Optional[str]
    """
    An arbitrary string attached to the object. Often useful for displaying to users.
    """
    flow_directions: Optional[List[Literal["inbound", "outbound"]]]
    """
    Indicates the directions of money movement for which this payment method is intended to be used.

    Include `inbound` if you intend to use the payment method as the origin to pull funds from. Include `outbound` if you intend to use the payment method as the destination to send funds to. You can include both if you intend to use the payment method for both purposes.
    """
    id: str
    """
    Unique identifier for the object.
    """
    last_setup_error: Optional[LastSetupError]
    """
    The error encountered in the previous SetupIntent confirmation.
    """
    latest_attempt: Optional[ExpandableField["SetupAttempt"]]
    """
    The most recent SetupAttempt for this SetupIntent.
    """
    livemode: bool
    """
    Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
    """
    mandate: Optional[ExpandableField["Mandate"]]
    """
    ID of the multi use Mandate generated by the SetupIntent.
    """
    metadata: Optional[Dict[str, str]]
    """
    Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
    """
    next_action: Optional[NextAction]
    """
    If present, this property tells you what actions you need to take in order for your customer to continue payment setup.
    """
    object: Literal["setup_intent"]
    """
    String representing the object's type. Objects of the same type share the same value.
    """
    on_behalf_of: Optional[ExpandableField["Account"]]
    """
    The account (if any) for which the setup is intended.
    """
    payment_method: Optional[ExpandableField["PaymentMethod"]]
    """
    ID of the payment method used with this SetupIntent. If the payment method is `card_present` and isn't a digital wallet, then the [generated_card](https://docs.stripe.com/api/setup_attempts/object#setup_attempt_object-payment_method_details-card_present-generated_card) associated with the `latest_attempt` is attached to the Customer instead.
    """
    payment_method_configuration_details: Optional[
        PaymentMethodConfigurationDetails
    ]
    """
    Information about the [payment method configuration](https://stripe.com/docs/api/payment_method_configurations) used for this Setup Intent.
    """
    payment_method_options: Optional[PaymentMethodOptions]
    """
    Payment method-specific configuration for this SetupIntent.
    """
    payment_method_types: List[str]
    """
    The list of payment method types (e.g. card) that this SetupIntent is allowed to set up.
    """
    single_use_mandate: Optional[ExpandableField["Mandate"]]
    """
    ID of the single_use Mandate generated by the SetupIntent.
    """
    status: Literal[
        "canceled",
        "processing",
        "requires_action",
        "requires_confirmation",
        "requires_payment_method",
        "succeeded",
    ]
    """
    [Status](https://stripe.com/docs/payments/intents#intent-statuses) of this SetupIntent, one of `requires_payment_method`, `requires_confirmation`, `requires_action`, `processing`, `canceled`, or `succeeded`.
    """
    usage: str
    """
    Indicates how the payment method is intended to be used in the future.

    Use `on_session` if you intend to only reuse the payment method when the customer is in your checkout flow. Use `off_session` if your customer may or may not be in your checkout flow. If not provided, this value defaults to `off_session`.
    """

    @classmethod
    def _cls_cancel(
        cls, intent: str, **params: Unpack["SetupIntent.CancelParams"]
    ) -> "SetupIntent":
        """
        You can cancel a SetupIntent object when it's in one of these statuses: requires_payment_method, requires_confirmation, or requires_action.

        After you cancel it, setup is abandoned and any operations on the SetupIntent fail with an error. You can't cancel the SetupIntent for a Checkout Session. [Expire the Checkout Session](https://docs.stripe.com/docs/api/checkout/sessions/expire) instead.
        """
        return cast(
            "SetupIntent",
            cls._static_request(
                "post",
                "/v1/setup_intents/{intent}/cancel".format(
                    intent=sanitize_id(intent)
                ),
                params=params,
            ),
        )

    @overload
    @staticmethod
    def cancel(
        intent: str, **params: Unpack["SetupIntent.CancelParams"]
    ) -> "SetupIntent":
        """
        You can cancel a SetupIntent object when it's in one of these statuses: requires_payment_method, requires_confirmation, or requires_action.

        After you cancel it, setup is abandoned and any operations on the SetupIntent fail with an error. You can't cancel the SetupIntent for a Checkout Session. [Expire the Checkout Session](https://docs.stripe.com/docs/api/checkout/sessions/expire) instead.
        """
        ...

    @overload
    def cancel(
        self, **params: Unpack["SetupIntent.CancelParams"]
    ) -> "SetupIntent":
        """
        You can cancel a SetupIntent object when it's in one of these statuses: requires_payment_method, requires_confirmation, or requires_action.

        After you cancel it, setup is abandoned and any operations on the SetupIntent fail with an error. You can't cancel the SetupIntent for a Checkout Session. [Expire the Checkout Session](https://docs.stripe.com/docs/api/checkout/sessions/expire) instead.
        """
        ...

    @class_method_variant("_cls_cancel")
    def cancel(  # pyright: ignore[reportGeneralTypeIssues]
        self, **params: Unpack["SetupIntent.CancelParams"]
    ) -> "SetupIntent":
        """
        You can cancel a SetupIntent object when it's in one of these statuses: requires_payment_method, requires_confirmation, or requires_action.

        After you cancel it, setup is abandoned and any operations on the SetupIntent fail with an error. You can't cancel the SetupIntent for a Checkout Session. [Expire the Checkout Session](https://docs.stripe.com/docs/api/checkout/sessions/expire) instead.
        """
        return cast(
            "SetupIntent",
            self._request(
                "post",
                "/v1/setup_intents/{intent}/cancel".format(
                    intent=sanitize_id(self.get("id"))
                ),
                params=params,
            ),
        )

    @classmethod
    async def _cls_cancel_async(
        cls, intent: str, **params: Unpack["SetupIntent.CancelParams"]
    ) -> "SetupIntent":
        """
        You can cancel a SetupIntent object when it's in one of these statuses: requires_payment_method, requires_confirmation, or requires_action.

        After you cancel it, setup is abandoned and any operations on the SetupIntent fail with an error. You can't cancel the SetupIntent for a Checkout Session. [Expire the Checkout Session](https://docs.stripe.com/docs/api/checkout/sessions/expire) instead.
        """
        return cast(
            "SetupIntent",
            await cls._static_request_async(
                "post",
                "/v1/setup_intents/{intent}/cancel".format(
                    intent=sanitize_id(intent)
                ),
                params=params,
            ),
        )

    @overload
    @staticmethod
    async def cancel_async(
        intent: str, **params: Unpack["SetupIntent.CancelParams"]
    ) -> "SetupIntent":
        """
        You can cancel a SetupIntent object when it's in one of these statuses: requires_payment_method, requires_confirmation, or requires_action.

        After you cancel it, setup is abandoned and any operations on the SetupIntent fail with an error. You can't cancel the SetupIntent for a Checkout Session. [Expire the Checkout Session](https://docs.stripe.com/docs/api/checkout/sessions/expire) instead.
        """
        ...

    @overload
    async def cancel_async(
        self, **params: Unpack["SetupIntent.CancelParams"]
    ) -> "SetupIntent":
        """
        You can cancel a SetupIntent object when it's in one of these statuses: requires_payment_method, requires_confirmation, or requires_action.

        After you cancel it, setup is abandoned and any operations on the SetupIntent fail with an error. You can't cancel the SetupIntent for a Checkout Session. [Expire the Checkout Session](https://docs.stripe.com/docs/api/checkout/sessions/expire) instead.
        """
        ...

    @class_method_variant("_cls_cancel_async")
    async def cancel_async(  # pyright: ignore[reportGeneralTypeIssues]
        self, **params: Unpack["SetupIntent.CancelParams"]
    ) -> "SetupIntent":
        """
        You can cancel a SetupIntent object when it's in one of these statuses: requires_payment_method, requires_confirmation, or requires_action.

        After you cancel it, setup is abandoned and any operations on the SetupIntent fail with an error. You can't cancel the SetupIntent for a Checkout Session. [Expire the Checkout Session](https://docs.stripe.com/docs/api/checkout/sessions/expire) instead.
        """
        return cast(
            "SetupIntent",
            await self._request_async(
                "post",
                "/v1/setup_intents/{intent}/cancel".format(
                    intent=sanitize_id(self.get("id"))
                ),
                params=params,
            ),
        )

    @classmethod
    def _cls_confirm(
        cls, intent: str, **params: Unpack["SetupIntent.ConfirmParams"]
    ) -> "SetupIntent":
        """
        Confirm that your customer intends to set up the current or
        provided payment method. For example, you would confirm a SetupIntent
        when a customer hits the “Save” button on a payment method management
        page on your website.

        If the selected payment method does not require any additional
        steps from the customer, the SetupIntent will transition to the
        succeeded status.

        Otherwise, it will transition to the requires_action status and
        suggest additional actions via next_action. If setup fails,
        the SetupIntent will transition to the
        requires_payment_method status or the canceled status if the
        confirmation limit is reached.
        """
        return cast(
            "SetupIntent",
            cls._static_request(
                "post",
                "/v1/setup_intents/{intent}/confirm".format(
                    intent=sanitize_id(intent)
                ),
                params=params,
            ),
        )

    @overload
    @staticmethod
    def confirm(
        intent: str, **params: Unpack["SetupIntent.ConfirmParams"]
    ) -> "SetupIntent":
        """
        Confirm that your customer intends to set up the current or
        provided payment method. For example, you would confirm a SetupIntent
        when a customer hits the “Save” button on a payment method management
        page on your website.

        If the selected payment method does not require any additional
        steps from the customer, the SetupIntent will transition to the
        succeeded status.

        Otherwise, it will transition to the requires_action status and
        suggest additional actions via next_action. If setup fails,
        the SetupIntent will transition to the
        requires_payment_method status or the canceled status if the
        confirmation limit is reached.
        """
        ...

    @overload
    def confirm(
        self, **params: Unpack["SetupIntent.ConfirmParams"]
    ) -> "SetupIntent":
        """
        Confirm that your customer intends to set up the current or
        provided payment method. For example, you would confirm a SetupIntent
        when a customer hits the “Save” button on a payment method management
        page on your website.

        If the selected payment method does not require any additional
        steps from the customer, the SetupIntent will transition to the
        succeeded status.

        Otherwise, it will transition to the requires_action status and
        suggest additional actions via next_action. If setup fails,
        the SetupIntent will transition to the
        requires_payment_method status or the canceled status if the
        confirmation limit is reached.
        """
        ...

    @class_method_variant("_cls_confirm")
    def confirm(  # pyright: ignore[reportGeneralTypeIssues]
        self, **params: Unpack["SetupIntent.ConfirmParams"]
    ) -> "SetupIntent":
        """
        Confirm that your customer intends to set up the current or
        provided payment method. For example, you would confirm a SetupIntent
        when a customer hits the “Save” button on a payment method management
        page on your website.

        If the selected payment method does not require any additional
        steps from the customer, the SetupIntent will transition to the
        succeeded status.

        Otherwise, it will transition to the requires_action status and
        suggest additional actions via next_action. If setup fails,
        the SetupIntent will transition to the
        requires_payment_method status or the canceled status if the
        confirmation limit is reached.
        """
        return cast(
            "SetupIntent",
            self._request(
                "post",
                "/v1/setup_intents/{intent}/confirm".format(
                    intent=sanitize_id(self.get("id"))
                ),
                params=params,
            ),
        )

    @classmethod
    async def _cls_confirm_async(
        cls, intent: str, **params: Unpack["SetupIntent.ConfirmParams"]
    ) -> "SetupIntent":
        """
        Confirm that your customer intends to set up the current or
        provided payment method. For example, you would confirm a SetupIntent
        when a customer hits the “Save” button on a payment method management
        page on your website.

        If the selected payment method does not require any additional
        steps from the customer, the SetupIntent will transition to the
        succeeded status.

        Otherwise, it will transition to the requires_action status and
        suggest additional actions via next_action. If setup fails,
        the SetupIntent will transition to the
        requires_payment_method status or the canceled status if the
        confirmation limit is reached.
        """
        return cast(
            "SetupIntent",
            await cls._static_request_async(
                "post",
                "/v1/setup_intents/{intent}/confirm".format(
                    intent=sanitize_id(intent)
                ),
                params=params,
            ),
        )

    @overload
    @staticmethod
    async def confirm_async(
        intent: str, **params: Unpack["SetupIntent.ConfirmParams"]
    ) -> "SetupIntent":
        """
        Confirm that your customer intends to set up the current or
        provided payment method. For example, you would confirm a SetupIntent
        when a customer hits the “Save” button on a payment method management
        page on your website.

        If the selected payment method does not require any additional
        steps from the customer, the SetupIntent will transition to the
        succeeded status.

        Otherwise, it will transition to the requires_action status and
        suggest additional actions via next_action. If setup fails,
        the SetupIntent will transition to the
        requires_payment_method status or the canceled status if the
        confirmation limit is reached.
        """
        ...

    @overload
    async def confirm_async(
        self, **params: Unpack["SetupIntent.ConfirmParams"]
    ) -> "SetupIntent":
        """
        Confirm that your customer intends to set up the current or
        provided payment method. For example, you would confirm a SetupIntent
        when a customer hits the “Save” button on a payment method management
        page on your website.

        If the selected payment method does not require any additional
        steps from the customer, the SetupIntent will transition to the
        succeeded status.

        Otherwise, it will transition to the requires_action status and
        suggest additional actions via next_action. If setup fails,
        the SetupIntent will transition to the
        requires_payment_method status or the canceled status if the
        confirmation limit is reached.
        """
        ...

    @class_method_variant("_cls_confirm_async")
    async def confirm_async(  # pyright: ignore[reportGeneralTypeIssues]
        self, **params: Unpack["SetupIntent.ConfirmParams"]
    ) -> "SetupIntent":
        """
        Confirm that your customer intends to set up the current or
        provided payment method. For example, you would confirm a SetupIntent
        when a customer hits the “Save” button on a payment method management
        page on your website.

        If the selected payment method does not require any additional
        steps from the customer, the SetupIntent will transition to the
        succeeded status.

        Otherwise, it will transition to the requires_action status and
        suggest additional actions via next_action. If setup fails,
        the SetupIntent will transition to the
        requires_payment_method status or the canceled status if the
        confirmation limit is reached.
        """
        return cast(
            "SetupIntent",
            await self._request_async(
                "post",
                "/v1/setup_intents/{intent}/confirm".format(
                    intent=sanitize_id(self.get("id"))
                ),
                params=params,
            ),
        )

    @classmethod
    def create(
        cls, **params: Unpack["SetupIntent.CreateParams"]
    ) -> "SetupIntent":
        """
        Creates a SetupIntent object.

        After you create the SetupIntent, attach a payment method and [confirm](https://docs.stripe.com/docs/api/setup_intents/confirm)
        it to collect any required permissions to charge the payment method later.
        """
        return cast(
            "SetupIntent",
            cls._static_request(
                "post",
                cls.class_url(),
                params=params,
            ),
        )

    @classmethod
    async def create_async(
        cls, **params: Unpack["SetupIntent.CreateParams"]
    ) -> "SetupIntent":
        """
        Creates a SetupIntent object.

        After you create the SetupIntent, attach a payment method and [confirm](https://docs.stripe.com/docs/api/setup_intents/confirm)
        it to collect any required permissions to charge the payment method later.
        """
        return cast(
            "SetupIntent",
            await cls._static_request_async(
                "post",
                cls.class_url(),
                params=params,
            ),
        )

    @classmethod
    def list(
        cls, **params: Unpack["SetupIntent.ListParams"]
    ) -> ListObject["SetupIntent"]:
        """
        Returns a list of SetupIntents.
        """
        result = cls._static_request(
            "get",
            cls.class_url(),
            params=params,
        )
        if not isinstance(result, ListObject):
            raise TypeError(
                "Expected list object from API, got %s"
                % (type(result).__name__)
            )

        return result

    @classmethod
    async def list_async(
        cls, **params: Unpack["SetupIntent.ListParams"]
    ) -> ListObject["SetupIntent"]:
        """
        Returns a list of SetupIntents.
        """
        result = await cls._static_request_async(
            "get",
            cls.class_url(),
            params=params,
        )
        if not isinstance(result, ListObject):
            raise TypeError(
                "Expected list object from API, got %s"
                % (type(result).__name__)
            )

        return result

    @classmethod
    def modify(
        cls, id: str, **params: Unpack["SetupIntent.ModifyParams"]
    ) -> "SetupIntent":
        """
        Updates a SetupIntent object.
        """
        url = "%s/%s" % (cls.class_url(), sanitize_id(id))
        return cast(
            "SetupIntent",
            cls._static_request(
                "post",
                url,
                params=params,
            ),
        )

    @classmethod
    async def modify_async(
        cls, id: str, **params: Unpack["SetupIntent.ModifyParams"]
    ) -> "SetupIntent":
        """
        Updates a SetupIntent object.
        """
        url = "%s/%s" % (cls.class_url(), sanitize_id(id))
        return cast(
            "SetupIntent",
            await cls._static_request_async(
                "post",
                url,
                params=params,
            ),
        )

    @classmethod
    def retrieve(
        cls, id: str, **params: Unpack["SetupIntent.RetrieveParams"]
    ) -> "SetupIntent":
        """
        Retrieves the details of a SetupIntent that has previously been created.

        Client-side retrieval using a publishable key is allowed when the client_secret is provided in the query string.

        When retrieved with a publishable key, only a subset of properties will be returned. Please refer to the [SetupIntent](https://docs.stripe.com/api#setup_intent_object) object reference for more details.
        """
        instance = cls(id, **params)
        instance.refresh()
        return instance

    @classmethod
    async def retrieve_async(
        cls, id: str, **params: Unpack["SetupIntent.RetrieveParams"]
    ) -> "SetupIntent":
        """
        Retrieves the details of a SetupIntent that has previously been created.

        Client-side retrieval using a publishable key is allowed when the client_secret is provided in the query string.

        When retrieved with a publishable key, only a subset of properties will be returned. Please refer to the [SetupIntent](https://docs.stripe.com/api#setup_intent_object) object reference for more details.
        """
        instance = cls(id, **params)
        await instance.refresh_async()
        return instance

    @classmethod
    def _cls_verify_microdeposits(
        cls,
        intent: str,
        **params: Unpack["SetupIntent.VerifyMicrodepositsParams"],
    ) -> "SetupIntent":
        """
        Verifies microdeposits on a SetupIntent object.
        """
        return cast(
            "SetupIntent",
            cls._static_request(
                "post",
                "/v1/setup_intents/{intent}/verify_microdeposits".format(
                    intent=sanitize_id(intent)
                ),
                params=params,
            ),
        )

    @overload
    @staticmethod
    def verify_microdeposits(
        intent: str, **params: Unpack["SetupIntent.VerifyMicrodepositsParams"]
    ) -> "SetupIntent":
        """
        Verifies microdeposits on a SetupIntent object.
        """
        ...

    @overload
    def verify_microdeposits(
        self, **params: Unpack["SetupIntent.VerifyMicrodepositsParams"]
    ) -> "SetupIntent":
        """
        Verifies microdeposits on a SetupIntent object.
        """
        ...

    @class_method_variant("_cls_verify_microdeposits")
    def verify_microdeposits(  # pyright: ignore[reportGeneralTypeIssues]
        self, **params: Unpack["SetupIntent.VerifyMicrodepositsParams"]
    ) -> "SetupIntent":
        """
        Verifies microdeposits on a SetupIntent object.
        """
        return cast(
            "SetupIntent",
            self._request(
                "post",
                "/v1/setup_intents/{intent}/verify_microdeposits".format(
                    intent=sanitize_id(self.get("id"))
                ),
                params=params,
            ),
        )

    @classmethod
    async def _cls_verify_microdeposits_async(
        cls,
        intent: str,
        **params: Unpack["SetupIntent.VerifyMicrodepositsParams"],
    ) -> "SetupIntent":
        """
        Verifies microdeposits on a SetupIntent object.
        """
        return cast(
            "SetupIntent",
            await cls._static_request_async(
                "post",
                "/v1/setup_intents/{intent}/verify_microdeposits".format(
                    intent=sanitize_id(intent)
                ),
                params=params,
            ),
        )

    @overload
    @staticmethod
    async def verify_microdeposits_async(
        intent: str, **params: Unpack["SetupIntent.VerifyMicrodepositsParams"]
    ) -> "SetupIntent":
        """
        Verifies microdeposits on a SetupIntent object.
        """
        ...

    @overload
    async def verify_microdeposits_async(
        self, **params: Unpack["SetupIntent.VerifyMicrodepositsParams"]
    ) -> "SetupIntent":
        """
        Verifies microdeposits on a SetupIntent object.
        """
        ...

    @class_method_variant("_cls_verify_microdeposits_async")
    async def verify_microdeposits_async(  # pyright: ignore[reportGeneralTypeIssues]
        self, **params: Unpack["SetupIntent.VerifyMicrodepositsParams"]
    ) -> "SetupIntent":
        """
        Verifies microdeposits on a SetupIntent object.
        """
        return cast(
            "SetupIntent",
            await self._request_async(
                "post",
                "/v1/setup_intents/{intent}/verify_microdeposits".format(
                    intent=sanitize_id(self.get("id"))
                ),
                params=params,
            ),
        )

    _inner_class_types = {
        "automatic_payment_methods": AutomaticPaymentMethods,
        "last_setup_error": LastSetupError,
        "next_action": NextAction,
        "payment_method_configuration_details": PaymentMethodConfigurationDetails,
        "payment_method_options": PaymentMethodOptions,
    }
