Metadata-Version: 1.1
Name: rpi-rf
Version: 0.9.5
Summary: Sending and receiving 433MHz signals with cheap GPIO RF modules on a Raspberry Pi
Home-page: https://github.com/milaq/rpi-rf
Author: Micha LaQua
Author-email: micha.laqua@gmail.com
License: BSD
Description: rpi-rf
        ======
        
        Introduction
        ------------
        
        Python module for sending and receiving 433MHz LPD/SRD signals with generic low-cost GPIO RF modules on a Raspberry Pi.
        
        Protocol and base logic ported ported from `rc-switch`_.
        
        Supported hardware
        ------------------
        
        All generic 433MHz capable modules (cost: ~2€) connected via GPIO to a Raspberry Pi.
        
        .. figure:: http://i.imgur.com/vG89UP9.jpg
           :alt: 433modules
        
        Compatibility
        -------------
        
        Generic RF outlets and most 433MHz switches (cost: ~15€/3pcs).
        
        .. figure:: http://i.imgur.com/WVRxvWe.jpg
           :alt: rfoutlet
        
        Full list compatible devices and chips see the `rc-switch Wiki`_
        
        Dependencies
        ------------
        
        ::
        
            RPi.GPIO
        
        Installation
        ------------
        
        On your Raspberry Pi, install the *rpi_rf* module via pip.
        
        Python 3::
        
            # apt-get install python3-pip
            # pip3 install rpi-rf
        
        Wiring diagram (example)
        ------------------------
        
        Raspberry Pi 1/2(B+)::
        
                               RPI GPIO HEADER
                          ____________
                         |        ____|__
                         |       |    |  |
                         |     01|  . x  |02
                         |       |  . x__|________       RX
                         |       |  . x__|______  |   ________
                         |       |  . .  |      | |  |        |
               TX        |   ____|__x .  |      | |__|VCC     |
             _______     |  |  __|__x .  |      |    |        |
            |       |    |  | |  |  x____|______|____|DATA    |
            |    GND|____|__| |  |  . .  |      |    |        |
            |       |    |    |  |  . .  |      |    |DATA    |
            |    VCC|____|    |  |  . .  |      |    |        |
            |       |         |  |  . .  |      |____|GND     |
            |   DATA|_________|  |  . .  |           |________|
            |_______|            |  . .  |
                                 |  . .  |
                                 |  . .  |
                                 |  . .  |
                                 |  . .  |
                                 |  . .  |
                                 |  . .  |
                               39|  . .  |40
                                 |_______|
        
            TX:
               GND > PIN 09 (GND)
               VCC > PIN 02 (5V)
              DATA > PIN 11 (GPIO17)
        
            RX:
               VCC > PIN 04 (5V)
              DATA > PIN 13 (GPIO27)
              GND > PIN 06 (GND)
        
        Usage
        -----
        
        See `examples`_ (`send.py`_, `receive.py`_).
        
        Open Source
        -----------
        
        * The code is licensed under the `BSD Licence`_
        * The project source code is hosted on `GitHub`_
        * Please use `GitHub issues`_ to submit bugs and report issues
        
        .. _rc-switch: https://github.com/sui77/rc-switch
        .. _rc-switch Wiki: https://github.com/sui77/rc-switch/wiki
        .. _BSD Licence: http://www.linfo.org/bsdlicense.html
        .. _GitHub: https://github.com/milaq/rpi-rf
        .. _GitHub issues: https://github.com/milaq/rpi-rf/issues
        .. _examples: https://github.com/milaq/rpi-rf/blob/master/examples
        .. _send.py: https://github.com/milaq/rpi-rf/blob/master/examples/send.py
        .. _receive.py: https://github.com/milaq/rpi-rf/blob/master/examples/receive.py
        
Keywords: rpi,raspberry,raspberry pi,rf,gpio,radio,433,433mhz
Platform: UNKNOWN
Classifier: Development Status :: 4 - Beta
Classifier: Intended Audience :: Developers
Classifier: Topic :: Software Development :: Build Tools
Classifier: License :: OSI Approved :: BSD License
Classifier: Programming Language :: Python :: 3
Classifier: Operating System :: POSIX :: Linux
Classifier: Topic :: Software Development :: Libraries :: Python Modules
