Metadata-Version: 2.1
Name: pioled-display-plugin
Version: 0.2.3
Summary: Use an OLED display with your Pioreactor
Home-page: https://github.com/Pioreactor/PiOLED-display-plugin
Author: Cameron Davidson-Pilon
Author-email: hello@pioreactor.com
Description-Content-Type: text/markdown
License-File: LICENSE.txt
Requires-Dist: adafruit-circuitpython-ssd1306

## PiOLED display plugin for the Pioreactor

Display growth rate, normalized OD, and temperature for each Pioreactor using the [Adafruit PiOLED display](https://www.adafruit.com/product/3527)


### Hardware required

 - [Adafruit PiOLED display](https://www.adafruit.com/product/3527)
 - [0.1" 2x20-pin Strip Right Angle Female Header](https://www.adafruit.com/product/2823)


### Installation

Install from the UI, or run:
```
pio install-plugin pioled-display-plugin
```

### Hardware installation

With the Pioreactor turned off, install the 2x20 right-angle header onto the the 2x20 header on the Pioreactor HAT. Attach the PiOLED display onto the right-hand side of the new header, with the orientation as shown in the image below:

<img width="462" alt="Screenshot 2023-06-21 at 2 40 14 PM" alt="PiOLD attached to the right-angle headers." src="https://github.com/Pioreactor/PiOLED-display-plugin/assets/884032/3b3096d0-4cfa-4a74-8ff1-36cff2fb4d99">
