// Copyright (c) 2022 PaddlePaddle Authors. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

/*
3D Rotated IoU Calculation (CPU)
Written by Shaoshuai Shi
All Rights Reserved 2020.
*/

#include "iou3d_cpu.h"
#include <math.h>
#include <stdio.h>
#include <vector>

namespace ultra_infer {
namespace paddle_custom_ops {

static inline float min(float a, float b) { return a > b ? b : a; }

static inline float max(float a, float b) { return a > b ? a : b; }

#if defined(_WIN32)
#if defined(EPS)
#undef EPS
#endif
#define EPS 1e-8
#else
static const float EPS = 1e-8;
#endif

struct Point {
  float x, y;
  Point() {}
  Point(double _x, double _y) { x = _x, y = _y; }

  void set(float _x, float _y) {
    x = _x;
    y = _y;
  }

  Point operator+(const Point &b) const { return Point(x + b.x, y + b.y); }

  Point operator-(const Point &b) const { return Point(x - b.x, y - b.y); }
};

static inline float cross(const Point &a, const Point &b) {
  return a.x * b.y - a.y * b.x;
}

static inline float cross(const Point &p1, const Point &p2, const Point &p0) {
  return (p1.x - p0.x) * (p2.y - p0.y) - (p2.x - p0.x) * (p1.y - p0.y);
}

static inline int check_rect_cross(const Point &p1, const Point &p2,
                                   const Point &q1, const Point &q2) {
  int ret = min(p1.x, p2.x) <= max(q1.x, q2.x) &&
            min(q1.x, q2.x) <= max(p1.x, p2.x) &&
            min(p1.y, p2.y) <= max(q1.y, q2.y) &&
            min(q1.y, q2.y) <= max(p1.y, p2.y);
  return ret;
}

static inline int check_in_box2d(const float *box, const Point &p) {
  // params: (7) [x, y, z, dx, dy, dz, heading]
  const float MARGIN = 1e-2;

  float center_x = box[0], center_y = box[1];
  float angle_cos = cos(-box[6]),
        angle_sin =
            sin(-box[6]); // rotate the point in the opposite direction of box
  float rot_x = (p.x - center_x) * angle_cos + (p.y - center_y) * (-angle_sin);
  float rot_y = (p.x - center_x) * angle_sin + (p.y - center_y) * angle_cos;

  return (fabs(rot_x) < box[3] / 2 + MARGIN &&
          fabs(rot_y) < box[4] / 2 + MARGIN);
}

static inline int intersection(const Point &p1, const Point &p0,
                               const Point &q1, const Point &q0, Point &ans) {
  // fast exclusion
  if (check_rect_cross(p0, p1, q0, q1) == 0)
    return 0;

  // check cross standing
  float s1 = cross(q0, p1, p0);
  float s2 = cross(p1, q1, p0);
  float s3 = cross(p0, q1, q0);
  float s4 = cross(q1, p1, q0);

  if (!(s1 * s2 > 0 && s3 * s4 > 0))
    return 0;

  // calculate intersection of two lines
  float s5 = cross(q1, p1, p0);
  if (fabs(s5 - s1) > EPS) {
    ans.x = (s5 * q0.x - s1 * q1.x) / (s5 - s1);
    ans.y = (s5 * q0.y - s1 * q1.y) / (s5 - s1);

  } else {
    float a0 = p0.y - p1.y, b0 = p1.x - p0.x, c0 = p0.x * p1.y - p1.x * p0.y;
    float a1 = q0.y - q1.y, b1 = q1.x - q0.x, c1 = q0.x * q1.y - q1.x * q0.y;
    float D = a0 * b1 - a1 * b0;

    ans.x = (b0 * c1 - b1 * c0) / D;
    ans.y = (a1 * c0 - a0 * c1) / D;
  }

  return 1;
}

static inline void rotate_around_center(const Point &center,
                                        const float angle_cos,
                                        const float angle_sin, Point &p) {
  float new_x =
      (p.x - center.x) * angle_cos + (p.y - center.y) * (-angle_sin) + center.x;
  float new_y =
      (p.x - center.x) * angle_sin + (p.y - center.y) * angle_cos + center.y;
  p.set(new_x, new_y);
}

static inline int point_cmp(const Point &a, const Point &b,
                            const Point &center) {
  return atan2(a.y - center.y, a.x - center.x) >
         atan2(b.y - center.y, b.x - center.x);
}

static inline float box_overlap(const float *box_a, const float *box_b) {
  // params: box_a (7) [x, y, z, dx, dy, dz, heading]
  // params: box_b (7) [x, y, z, dx, dy, dz, heading]

  //    float a_x1 = box_a[0], a_y1 = box_a[1], a_x2 = box_a[2], a_y2 =
  //    box_a[3], a_angle = box_a[4];
  //    float b_x1 = box_b[0], b_y1 = box_b[1], b_x2 = box_b[2], b_y2 =
  //    box_b[3], b_angle = box_b[4];
  float a_angle = box_a[6], b_angle = box_b[6];
  float a_dx_half = box_a[3] / 2, b_dx_half = box_b[3] / 2,
        a_dy_half = box_a[4] / 2, b_dy_half = box_b[4] / 2;
  float a_x1 = box_a[0] - a_dx_half, a_y1 = box_a[1] - a_dy_half;
  float a_x2 = box_a[0] + a_dx_half, a_y2 = box_a[1] + a_dy_half;
  float b_x1 = box_b[0] - b_dx_half, b_y1 = box_b[1] - b_dy_half;
  float b_x2 = box_b[0] + b_dx_half, b_y2 = box_b[1] + b_dy_half;

  Point center_a(box_a[0], box_a[1]);
  Point center_b(box_b[0], box_b[1]);

  Point box_a_corners[5];
  box_a_corners[0].set(a_x1, a_y1);
  box_a_corners[1].set(a_x2, a_y1);
  box_a_corners[2].set(a_x2, a_y2);
  box_a_corners[3].set(a_x1, a_y2);

  Point box_b_corners[5];
  box_b_corners[0].set(b_x1, b_y1);
  box_b_corners[1].set(b_x2, b_y1);
  box_b_corners[2].set(b_x2, b_y2);
  box_b_corners[3].set(b_x1, b_y2);

  // get oriented corners
  float a_angle_cos = cos(a_angle), a_angle_sin = sin(a_angle);
  float b_angle_cos = cos(b_angle), b_angle_sin = sin(b_angle);

  for (int k = 0; k < 4; k++) {
    rotate_around_center(center_a, a_angle_cos, a_angle_sin, box_a_corners[k]);
    rotate_around_center(center_b, b_angle_cos, b_angle_sin, box_b_corners[k]);
  }

  box_a_corners[4] = box_a_corners[0];
  box_b_corners[4] = box_b_corners[0];

  // get intersection of lines
  Point cross_points[16];
  Point poly_center;
  int cnt = 0, flag = 0;

  poly_center.set(0, 0);
  for (int i = 0; i < 4; i++) {
    for (int j = 0; j < 4; j++) {
      flag = intersection(box_a_corners[i + 1], box_a_corners[i],
                          box_b_corners[j + 1], box_b_corners[j],
                          cross_points[cnt]);
      if (flag) {
        poly_center = poly_center + cross_points[cnt];
        cnt++;
      }
    }
  }

  // check corners
  for (int k = 0; k < 4; k++) {
    if (check_in_box2d(box_a, box_b_corners[k])) {
      poly_center = poly_center + box_b_corners[k];
      cross_points[cnt] = box_b_corners[k];
      cnt++;
    }
    if (check_in_box2d(box_b, box_a_corners[k])) {
      poly_center = poly_center + box_a_corners[k];
      cross_points[cnt] = box_a_corners[k];
      cnt++;
    }
  }

  poly_center.x /= cnt;
  poly_center.y /= cnt;

  // sort the points of polygon
  Point temp;
  for (int j = 0; j < cnt - 1; j++) {
    for (int i = 0; i < cnt - j - 1; i++) {
      if (point_cmp(cross_points[i], cross_points[i + 1], poly_center)) {
        temp = cross_points[i];
        cross_points[i] = cross_points[i + 1];
        cross_points[i + 1] = temp;
      }
    }
  }

  // get the overlap areas
  float area = 0;
  for (int k = 0; k < cnt - 1; k++) {
    area += cross(cross_points[k] - cross_points[0],
                  cross_points[k + 1] - cross_points[0]);
  }

  return fabs(area) / 2.0;
}

static inline float iou_bev(const float *box_a, const float *box_b) {
  // params: box_a (7) [x, y, z, dx, dy, dz, heading]
  // params: box_b (7) [x, y, z, dx, dy, dz, heading]
  float sa = box_a[3] * box_a[4];
  float sb = box_b[3] * box_b[4];
  float s_overlap = box_overlap(box_a, box_b);
  return s_overlap / fmaxf(sa + sb - s_overlap, EPS);
}

int boxes_iou_bev_cpu(paddle::Tensor boxes_a_tensor,
                      paddle::Tensor boxes_b_tensor,
                      paddle::Tensor ans_iou_tensor) {
  // params boxes_a_tensor: (N, 7) [x, y, z, dx, dy, dz, heading]
  // params boxes_b_tensor: (M, 7) [x, y, z, dx, dy, dz, heading]
  // params ans_iou_tensor: (N, M)

  // CHECK_CONTIGUOUS(boxes_a_tensor);
  // CHECK_CONTIGUOUS(boxes_b_tensor);

  int num_boxes_a = boxes_a_tensor.shape()[0];
  int num_boxes_b = boxes_b_tensor.shape()[0];
  const float *boxes_a = boxes_a_tensor.data<float>();
  const float *boxes_b = boxes_b_tensor.data<float>();
  float *ans_iou = ans_iou_tensor.data<float>();

  for (int i = 0; i < num_boxes_a; i++) {
    for (int j = 0; j < num_boxes_b; j++) {
      ans_iou[i * num_boxes_b + j] = iou_bev(boxes_a + i * 7, boxes_b + j * 7);
    }
  }
  return 1;
}

} // namespace paddle_custom_ops
} // namespace ultra_infer
