# Changelog

## [1.5.0](https://github.com/networktocode/ntc-templates/tree/1.5.0) (2020-06-14)

[Full Changelog](https://github.com/networktocode/ntc-templates/compare/v1.4.2...1.5.0)

**Implemented enhancements:**

- Broadcom ICOS/Fastpath Support? [\#726](https://github.com/networktocode/ntc-templates/issues/726)

**Fixed bugs:**

- Cisco IOS show cdp neighbors issue [\#727](https://github.com/networktocode/ntc-templates/issues/727)
- Cisco IOS Show Interface Switchport does not parse multi-line VLAN Trunks [\#642](https://github.com/networktocode/ntc-templates/issues/642)
- Cisco ASA Show interface does not catch unnamed interfaces [\#627](https://github.com/networktocode/ntc-templates/issues/627)
- Fixes missing interfaces on down interfaces [\#734](https://github.com/networktocode/ntc-templates/pull/734) ([jvanderaa](https://github.com/jvanderaa))

**Closed issues:**

- Cisco ASA "show vpn-sessiondb anyconnect" parser doesn't support IPv6 addresses [\#751](https://github.com/networktocode/ntc-templates/issues/751)
- failing testsuite [\#743](https://github.com/networktocode/ntc-templates/issues/743)
- I would like to contribute the PR for adding new cisco\_wlc\_ssh\_show\_ap\_image\_all [\#739](https://github.com/networktocode/ntc-templates/issues/739)
- Template help for multiple states [\#737](https://github.com/networktocode/ntc-templates/issues/737)
- textfsm.parser.TextFSMError: State Error raised. Rule Line: 15. Input Line: show ip arp [\#686](https://github.com/networktocode/ntc-templates/issues/686)
- Arista eos - sh ip bgp summ vrf all and sh ip route vrf all template [\#666](https://github.com/networktocode/ntc-templates/issues/666)
- Template Creation Help: cisco\_xr\_admin\_show\_environment\_power to get power supply, voltage and current   [\#648](https://github.com/networktocode/ntc-templates/issues/648)
- New template: hp\_comware\_display\_interface\_textFSM [\#634](https://github.com/networktocode/ntc-templates/issues/634)
- cisco\_asa\_show\_failover\_state [\#546](https://github.com/networktocode/ntc-templates/issues/546)

**Merged pull requests:**

- Arista eos show port channel summary [\#757](https://github.com/networktocode/ntc-templates/pull/757) ([JoeyG1973](https://github.com/JoeyG1973))
- Arista eos show mac address table [\#756](https://github.com/networktocode/ntc-templates/pull/756) ([JoeyG1973](https://github.com/JoeyG1973))
- Template correction for broadcom\_icos\_show\_mac-address-table [\#754](https://github.com/networktocode/ntc-templates/pull/754) ([alepodj](https://github.com/alepodj))
- Fixes \#751 - IPv6 support for Cisco ASA 'show vpn-sessiondb anyconnect' [\#752](https://github.com/networktocode/ntc-templates/pull/752) ([smfeldman](https://github.com/smfeldman))
- New Template added support for broadcom\_icos\_show\_vlan\_brief [\#750](https://github.com/networktocode/ntc-templates/pull/750) ([alepodj](https://github.com/alepodj))
- New Template added support for broadcom\_icos\_show\_lldp\_remote-device\_all [\#749](https://github.com/networktocode/ntc-templates/pull/749) ([alepodj](https://github.com/alepodj))
- New Template added support for broadcom\_icos\_show\_isdp\_neighbors [\#748](https://github.com/networktocode/ntc-templates/pull/748) ([alepodj](https://github.com/alepodj))
- Bugfix: Account for totals - cisco\_ios\_show\_processes\_memory\_sorted.textfsm [\#747](https://github.com/networktocode/ntc-templates/pull/747) ([FragmentedPacket](https://github.com/FragmentedPacket))
- Enhancement for Cisco IOS show interfaces [\#745](https://github.com/networktocode/ntc-templates/pull/745) ([Yakuza-UA](https://github.com/Yakuza-UA))
- Added interfaces to arista\_eos\_show\_vrf template [\#744](https://github.com/networktocode/ntc-templates/pull/744) ([JoeyG1973](https://github.com/JoeyG1973))
- Add new template for cisco\_wlc\_ssh\_sh\_ap\_image\_all [\#742](https://github.com/networktocode/ntc-templates/pull/742) ([conorwu1107](https://github.com/conorwu1107))
- Update index to handle cisco\_ios show\_ip\_bgp\_all\_summary [\#738](https://github.com/networktocode/ntc-templates/pull/738) ([Niclnx](https://github.com/Niclnx))
- Added support for broadcom\_icos command show\_mac-address-table [\#736](https://github.com/networktocode/ntc-templates/pull/736) ([alepodj](https://github.com/alepodj))
- BugFix: IOS CDP - Better handling of output [\#735](https://github.com/networktocode/ntc-templates/pull/735) ([jmcgill298](https://github.com/jmcgill298))
- New Template support for broadcom\_icos as a new OS and added show\_version command [\#733](https://github.com/networktocode/ntc-templates/pull/733) ([alepodj](https://github.com/alepodj))
- New template for ubiquity edgeswitch: show version [\#732](https://github.com/networktocode/ntc-templates/pull/732) ([saaverdo](https://github.com/saaverdo))
- New Template for Cisco NX-OS: show forwarding adjacency [\#722](https://github.com/networktocode/ntc-templates/pull/722) ([Yakuza-UA](https://github.com/Yakuza-UA))
- BugFix: cisco\_ios\_show\_interfaces\_switchport: Made trunking\_vlans a list, and changed regex [\#671](https://github.com/networktocode/ntc-templates/pull/671) ([FragmentedPacket](https://github.com/FragmentedPacket))

## [1.4.2](https://github.com/networktocode/ntc-templates/tree/1.4.2) (2020-05-25)

[Full Changelog](https://github.com/networktocode/ntc-templates/compare/v1.4.1...1.4.2)

**Fixed bugs:**

- cisco\_ios "show ip ospf database router" fails if OSPF domain includes an ASBR or an ABR [\#690](https://github.com/networktocode/ntc-templates/issues/690)
- Arista EOS show ip route parse error [\#668](https://github.com/networktocode/ntc-templates/issues/668)
- cisco\_ios\_show\_ip\_interface does not deal with ip address negotiated on Tunnel interface [\#644](https://github.com/networktocode/ntc-templates/issues/644)

**Closed issues:**

- Cisco IOS - textfsm.parser.TextFSMError: State Error raised. Rule Line: 17.   [\#718](https://github.com/networktocode/ntc-templates/issues/718)
- show mac address-table Error: State Error raised. Rule Line: 41. [\#715](https://github.com/networktocode/ntc-templates/issues/715)
- show mac address-table no dictionary in response [\#714](https://github.com/networktocode/ntc-templates/issues/714)
- Having trouble with alcatel\_sros templates  [\#698](https://github.com/networktocode/ntc-templates/issues/698)
- Cisco show cdp neighbor details leaves whitespace in capabilities field [\#683](https://github.com/networktocode/ntc-templates/issues/683)
- cisco\_ios neighbor summary per address family new request. [\#664](https://github.com/networktocode/ntc-templates/issues/664)
- cisco\_ios BGP neighbor advertised and received routes request. [\#663](https://github.com/networktocode/ntc-templates/issues/663)
- Ciena naming doesn’t conform to Netmiko [\#662](https://github.com/networktocode/ntc-templates/issues/662)
- Problem to add or install ntc-templates: [\#658](https://github.com/networktocode/ntc-templates/issues/658)
- show\_vlan template for cisco ios does not return more than 60 interfaces [\#653](https://github.com/networktocode/ntc-templates/issues/653)
- Unable to parse data by using "cisco\_ios\_show\_ip\_route\_summary.textfsm" [\#643](https://github.com/networktocode/ntc-templates/issues/643)
- template request: show ip bgp neighbors x.x.x.x advertised-routes  [\#639](https://github.com/networktocode/ntc-templates/issues/639)

**Merged pull requests:**

- IOS: Allow deleted STATUS in show interfaces description [\#725](https://github.com/networktocode/ntc-templates/pull/725) ([itdependsnetworks](https://github.com/itdependsnetworks))
- Update to enforce double-quote [\#724](https://github.com/networktocode/ntc-templates/pull/724) ([itdependsnetworks](https://github.com/itdependsnetworks))
- Enhance Template for Cisco IOS: show adjacency [\#721](https://github.com/networktocode/ntc-templates/pull/721) ([Yakuza-UA](https://github.com/Yakuza-UA))
- New templates: Cisco s300 - LLDP Neighbors, Interfaces status, Mac address table [\#719](https://github.com/networktocode/ntc-templates/pull/719) ([FragmentedPacket](https://github.com/FragmentedPacket))
- EOS can have N/A in the age field for show ip arp [\#717](https://github.com/networktocode/ntc-templates/pull/717) ([ktbyers](https://github.com/ktbyers))
- New Template: juniper\_junos\_show\_lacp\_interfaces [\#713](https://github.com/networktocode/ntc-templates/pull/713) ([ichisuke55](https://github.com/ichisuke55))
- New Template: paloalto\_panos\_show\_interface\_management.textfsm [\#712](https://github.com/networktocode/ntc-templates/pull/712) ([FragmentedPacket](https://github.com/FragmentedPacket))
- Bugfix: EOS - show\_interfaces - Added proper link\_status capture for admin down [\#711](https://github.com/networktocode/ntc-templates/pull/711) ([FragmentedPacket](https://github.com/FragmentedPacket))
- Bugfix: Panos sh intf hardware - Account for unk for SPEED/Duplex [\#710](https://github.com/networktocode/ntc-templates/pull/710) ([FragmentedPacket](https://github.com/FragmentedPacket))
- BugFix: Updated index file to work for show ip bgp neighbors x.x.x.x adv-routes [\#709](https://github.com/networktocode/ntc-templates/pull/709) ([FragmentedPacket](https://github.com/FragmentedPacket))
- BugFix: Ciena Saos: Added more use cases to vlan\_show [\#707](https://github.com/networktocode/ntc-templates/pull/707) ([FragmentedPacket](https://github.com/FragmentedPacket))
- paloalto\_panos\_debug\_swm\_status.textfsm new template [\#706](https://github.com/networktocode/ntc-templates/pull/706) ([ancoleman](https://github.com/ancoleman))
- New Template for Cisco NX-OS: show ip adjacency [\#704](https://github.com/networktocode/ntc-templates/pull/704) ([Yakuza-UA](https://github.com/Yakuza-UA))
- New Template for Cisco IOS: show ip vrf interfaces [\#702](https://github.com/networktocode/ntc-templates/pull/702) ([Yakuza-UA](https://github.com/Yakuza-UA))
- Existing Template for Cisco NX-OS: show ip interface brief \(VRF support added\) [\#701](https://github.com/networktocode/ntc-templates/pull/701) ([Yakuza-UA](https://github.com/Yakuza-UA))
- New Template: juniper\_junos\_show\_ethenet-switching\_table.textfsm [\#700](https://github.com/networktocode/ntc-templates/pull/700) ([ichisuke55](https://github.com/ichisuke55))
- New Template for Cisco IOS: traceroute \<destination\> \[options\] [\#699](https://github.com/networktocode/ntc-templates/pull/699) ([Yakuza-UA](https://github.com/Yakuza-UA))
- BugFix: show vpn-sessiondb anyconnect - Index and Username ends up on… [\#697](https://github.com/networktocode/ntc-templates/pull/697) ([anttof](https://github.com/anttof))
- Asa bgp summary [\#696](https://github.com/networktocode/ntc-templates/pull/696) ([corvese](https://github.com/corvese))
- New Template for Cisco IOS: show ip cef \[detail\] [\#695](https://github.com/networktocode/ntc-templates/pull/695) ([Yakuza-UA](https://github.com/Yakuza-UA))
- Ciena sshkeystatus [\#693](https://github.com/networktocode/ntc-templates/pull/693) ([georgesnow](https://github.com/georgesnow))
- Cisco IOS 'show adjacency .\* detail' [\#692](https://github.com/networktocode/ntc-templates/pull/692) ([Yakuza-UA](https://github.com/Yakuza-UA))
- Bugfix: Accounted for ASBR/ABR in cisco\_ios\_show\_ip\_ospf\_database\_router [\#691](https://github.com/networktocode/ntc-templates/pull/691) ([FragmentedPacket](https://github.com/FragmentedPacket))
- HP Procurve show lldp info remote device [\#689](https://github.com/networktocode/ntc-templates/pull/689) ([sliddjur](https://github.com/sliddjur))
- HP Procurve show lldp info remote-device detail [\#688](https://github.com/networktocode/ntc-templates/pull/688) ([sliddjur](https://github.com/sliddjur))
- HP Procurve show trunks [\#687](https://github.com/networktocode/ntc-templates/pull/687) ([sliddjur](https://github.com/sliddjur))
- BugFix: \(IOS\) - show cdp neighbors detail - Prevent capturing trailing whitespace for capabilities [\#684](https://github.com/networktocode/ntc-templates/pull/684) ([FragmentedPacket](https://github.com/FragmentedPacket))
- BugFix: IOS - show ip bgp summary: Added new field ADDR\_FAMILY for any that may have an address family [\#679](https://github.com/networktocode/ntc-templates/pull/679) ([FragmentedPacket](https://github.com/FragmentedPacket))
- BugFix: IOS - show ip bgp - Account for VRF info within routing table [\#678](https://github.com/networktocode/ntc-templates/pull/678) ([FragmentedPacket](https://github.com/FragmentedPacket))
- New Template: \(IOS\) show\_ip\_bgp\_neighbors\_advertised\_routes [\#674](https://github.com/networktocode/ntc-templates/pull/674) ([FragmentedPacket](https://github.com/FragmentedPacket))
- Enhancement: Added CRC and Abort Values to ios\_show\_interfaces template [\#673](https://github.com/networktocode/ntc-templates/pull/673) ([mtbutler07](https://github.com/mtbutler07))
- Remove "terminal" dependency [\#672](https://github.com/networktocode/ntc-templates/pull/672) ([ktbyers](https://github.com/ktbyers))
- BugFix: cisco\_ios\_show\_ip\_interface: Account for Internet address that is negotiated [\#670](https://github.com/networktocode/ntc-templates/pull/670) ([FragmentedPacket](https://github.com/FragmentedPacket))
- BugFix: arista\_eos\_show\_ip\_route: Accounting for new data for WARNING output & capture ecmp routes [\#669](https://github.com/networktocode/ntc-templates/pull/669) ([FragmentedPacket](https://github.com/FragmentedPacket))
- Enhancement: cisco\_ios\_show\_redundancy - Add New fields [\#667](https://github.com/networktocode/ntc-templates/pull/667) ([FragmentedPacket](https://github.com/FragmentedPacket))
- Ciena SAOS templates \(naming fix\) [\#665](https://github.com/networktocode/ntc-templates/pull/665) ([georgesnow](https://github.com/georgesnow))
- Adds support for Cisco FTD [\#654](https://github.com/networktocode/ntc-templates/pull/654) ([micahculpepper](https://github.com/micahculpepper))
- New Template: hp\_comware\_display\_ip\_routing-table & hp\_comware\_display\_device\_manuinfo [\#623](https://github.com/networktocode/ntc-templates/pull/623) ([xdai555](https://github.com/xdai555))

## [1.4.1]
### Fixed
- [#617] - IOS show ip ospf database router: Removed reliance on static spacing
- [#620] - NXOS show fex: Allow spaces in descriptions
- [#621] - Juniper show arp, etc.: Account for virtual chassis output (`{master:0}`)
- [#626] - ASA show vpn-sessiondb anyconnect: Require index, capture different format style
- [#650] - IOS show ip ospf database network: Change to allow one or more whitespace at the beginning of the line rather than 1 or more due to different output
- [#647] - ASA show route: Allow multiline route statements
- [#659] - IOS show mac address-table: Allow VLAN to be non-whitespace to allow N/A as an option

### Added
- [#618] - IOS show ip ospf database network: New template
- [#619] - HP Comware display lldp neighbor information verbose: New template
- [#625] - ASA show vpn-sessiondb anyconnect: New template
- [#628] - Cisco WLC show mobility sum: New template
- [#631] - ASA show vpn-sessiondb anyconnect: Account for new data for assigned/public IP, group policy, and tunnel group
- [#629] - ASA show crypto ipsec sa - Add LOCAL_ADDRESS_NAME, CURRENT_PEER_NAME, DYNAMIC_PEER_NAME, LOCAL_CRYPTO_ENDPOINT_NAME, REMOTE_CRYPTO_ENDPOINT_NAME
- [#632] - ASA show nat: Added SERVICE_PROTOCOL
- [#635] - IOS show ip route summary: New template
- [#636] - ASA show vpn-sessiondb: New template
- [#638] - ASA show inventory: Capture PID and VID withoout serial
- [#637] - Cisco WLC show band select: New template

## [1.4.0]
### Fixed
- [#548] IOS show mac address-table: Account for Total Mac Addresses
- [#565] IOS show license: Avoid trailing spaces for features
- [#575] NXOS show version: Match N5K PLATFORM & LAST_REBOOT captures split words
- [#574] ASA show failover: Account for new output (IPS)
- [#577] IOS show mac address-table: Account for Multicast Entries
- [#582] NXOS show interface transceiver: Remove requirement for TYPE
- [#585] IOS show mac address-table: Fixed ordering for TYPE2
- [#587] IOS show interfaces switchport: Account for Vepa Enabled and Operational Dot1q Ethertype
- [#584] IOS show switch detail: Account for Mac persistency wait time
- [#589] EOS show ip route: Filldown for DISTANCE and METRIC - Added new data formats for VRF and NEXT_HOP and INTERFACE
- [#592] Fortinet get router info bgp summary: Account for more data, fix UP_DOWN regex from word to non-whitespace
- [#603] IOS show ip access-list: Update PROTOCOL to capture numbered protocols
- [610] Aruba os show arp: Fix tests to have the full output from the command and device
- [#608] Vyatta VyOS show interfaces: Capture IP_ADDRESS with or without netmask
- [#614] IOS show interfaces status: Remove reliance on whitespaces
### Added
- [#406] Testing: Add yamllint to test suite
- [#407] Testing: Add python black to test suite
- [#553] IOS show lldp neighbors: Added CAPABILITIES capture group
- [#554] IOS show logging: New template
- [#563] IOS show interfaces switchport: Added ADMIN_MDOE capture group
- [#562] ASA show logging: New template
- [#564] NXOS show interface transceiver: New template
- [#567] XR show arp: New template
- [#572] IOS show lldp neighbors detail: Added SERIAL capture group
- [#573] ASA show arp: New template
- [#578] Fortinet get system interface: New template
- [#576] Huawei VRP display lldp neighbor: New template
- [#581] Cisco WLC show vlan sum: New template
- [#580] XR show interfaces summary: New template
- [#590] IOS show ip bgp neighbors: New template
- [#591] NXOS show vdc: New template
- [#595] Checkpoint GAIA show arp dynamic all: New template
- [#593] IOS show module: New template
- [#597] Huwai VRP display version: New template
- [#602] NXOS show vrf interface: New template
- [#598] IOS show running-config partition access list: Added TCP_FLAG capture group
- [#598] IOS show running-config partition access list: Convert COMMENT to list
- [#598] IOS show running-config partition access list: Update PROTOCOL to include numbered protocols
- [#596] XR admin show environment power: New template
- [#594] Aruba os show arp: New template
- [#605] SG300 show version: New template
- [#604] NXOS show vlan: Added INTERFACES capture group, Require VLAN_ID
- [#600] IOS show mpls interfaces: New template
- [#599] IOS show etherchannel summary: New template
- [#611] NXOS show interface: Added MODE capture group
- [#612] NXOS show interfaces switchport: Added ACCESS_VLAN_NAME and NATIVE_VLAN_NAME capture groups
- [#609] HP Comware display ip interface: New template
- [#606] IOS show ip ospf database router: New template
### Changed
- [#406] Helpers: Added development_helpers cli utility to replace existing helpers
### Deprecated
### Removed

## [1.3.0]
### Fixed
- [#401] ASA show route: Fix `UPTIME` to account for additional output formats
- [#445] IOS show ip eigrp topology: Fix `FD` to allow value to be "Inaccessible"
- [#465] ASA show failover: Add line to match FirePOWER module
- [#466] PAN show arp: Fix `MAC` capture group to account for entries that are "incomplete"
- [#471] Procurve show arp: Fix `IP` capture group to account for IP Adresses that are "Incomplete"
- [#471] Procurve show arp: Fix `PORT` capture group to account for interfaces that contain more than just digits
- [#474] IOS show ip mroute: Fix `Value UP_TIME`, `EXPIRATION_TIME`, `OUTGOING_MULTICAST_UP_TIME (\S+)`, and `OUTGOING_MULTICAST_EXPIRATION_TIME` to account for additional time formats
- [#479] NXOS show interface brief: Fix capturing `MODE` values of "pvlan" and "fabric"
- [#480] IOS show cdp neighbors: Allow for table data to have leading spaces but not require it
- [#485] IOS show mac-address-table: Allow for table data to have leading spaces but not require it (VLAN IDs are left adjusted so VLANs from 1000 on do not have a leading space)
- [#487] IOS show authentication sessions: Add match for lines separating output with a "-" in order to avoid capturing them as part of normal table data
- [#488] EOS show interfaces status: Fix `NAME` and `STATUS` capture groups to support disabled interfaces
- [#494] IOS show ip interface: Add matches for additional output lines
- [#495] IOS show ip interface: Add matches for additional output lines
- [#497] ASA show version: Fix `MAX_INTF` capture group to account for `Unlimited`
- [#497] ASA show version: Fix `HARDWARE` capture group to account for trailing commas
- [#499] ASA show inventory: Add matches for additional output lines
- [#503] IOS show standby: Fix output that spread across two lines
- [#505] NXOS show ip bgp neighbors: Fix matching entries accurately when neighbors are in a "down" state; move to `Continue.Record` to record on new entries instead of "last expected line" of output data
- [#516] IOS show ip interface: Add matches for additional output lines
- [#517] EOS show ip bgp summary: Fix capturing entries with more explicit match line
- [#519] XR show version - Fix `VERSION`, `UPTIME`, and `HARDWARE` to account for CRS syntax
- [#525] IOS: Added matches for vty timestamp lines
- [#532] IOS show snmp user: Fix capture groups to support all non-whitespace characters (e.g. "-" in string values)
- [#538] IOS show interfaces switchport: Added matches for additional output lines
### Added
- [#378] XR show ip route: Added `VRF` capture group
- [#391] WLC show client detail: Added new template
- [#419] ASA dir: Added `TOTAL_PERCENT_FREE` capture group for capturing percentage of bytes free
- [#425] WLC show exclusionlist: Added new template
- [#445] IOS show ip eigrp topology: Added `SOURCE` capture group
- [#446] ASA show asp drop: Added `FLOW_DROP_IPSEC_SELECTOR_FAILURE`, `FLOW_LAST_CLEARED`, `MP_SVC_BAD_LENGTH`, and `SSL_FIRST_RECORD_INVALID` capture groups
- [#464] Comware display counters bound interface: Added new template
- [#468] Firebox show arp: Added new template
- [#476] IOS show ip bgp summary: Added `UP_DOWN` capture group
- [#478] NXOS show ip interface brief: Added new template
- [#481] NXOS show ip bgp neighbor: Added `INBOUND_ROUTEMAP` and `OUTBOUND_ROUTEMAP` capture groups
- [#482] XR admin show inventory: Added new template
- [#486] NXOS show route-map: Added new template
- [#489] NXOS show forwarding ipv4 route: Added new template
- [#491] IOS show switch detail: Added new template
- [#492] XR show ipv6 neighbors: Added new template
- [#493] Fastiron show arp: Added new template
- [#496] EOS show ip helper-address: Added new template
- [#501] WLC show 802.11a|b: Added new template
- [#510] WLC show 802.11 cleanair config: Added new template
- [#512] VRP display interface brief: Added new template
- [#512] VRP display temperature: Added new template
- [#513] WLC show rf profile-summary: Added new template
- [#514] IOS show process memory sorted: Added new template
- [#515] WLC show inventory: Added new template
- [#518] Ciena software show: Added new template
- [#521] IOS show ip route: Added `VRF` capture group
- [#524] EOS show vrf: Added new template
- [#526] WLC show advanced 802.11 channel: Added new template
- [#527] IOS show interfaces switchport: Added `VOICE_VLAN` capture group
- [#527] NXOS show interfaces switchport: Added `VOICE_VLAN` capture group
- [#529] Fortios get router info bgp summary: Added new template
- [#531] NXOS show interface: Added `LAST_LINK_FLAPPED` capture group
- [#533] IOS show license: Added new template
- [#539] WLC show interface summary: Added new template
- [#540] IOS show environment temperature: Added new template
### Changed
- [#378] XR show ip route: Update index to allow syntax of "show ip route" or "show route"
- [#497] ASA show version: Change `SERIAL` to be a list for clusters
- [#503] IOS show standby: Update index to allow syntax including specifying an interface
- [#520] IOS show ip bgp summary: Update template and index to support VRF syntax
- [#520] EOS show ip bgp summary: Update template and index to support VRF syntax
- [#521] IOS show ip route: Add `Error` for unmatched lines to ensure accurate data collection
- [#522] EOS show bgp summary: Update index to allow syntax of "show bgp evpn summary"
- [#523] IOS show mac-address-table: Add `Error` for unmatched lines to ensure accurate data collection
- [#528] IOS show interfaces switchport: Update template to use `Continue.Record` syntax to record on new entries instead of "last expected line" of output data
- [#528] NXOS show interfaces switchport: Update template to use `Continue.Record` syntax to record on new entries instead of "last expected line" of output data
### Deprecated
### Removed

## [1.2.1]
### Fixed
- Bumped `__version__` in `__init__` file
### Added
### Changed
### Deprecated
### Removed

## [1.2.0]
### Fixed
- [#389] IOS-XR show interfaces: Fixed matching speed and duplex for bundle-ethernet interfaces
- [#442] IOS-XR show version: Fixed matching `build_host` field that uses both "Build" and "Built" keywords
- [#455][#456] Template files were inaccessable when installing from local directory; now works when using `pip -e`
### Added
- [#470] ASA show version: Add capturing `compiled_date` field
