Metadata-Version: 2.1
Name: irreceiver
Version: 0.9.3
Summary: A module to parse the NEC IR remote control protocol in Python
Home-page: https://github.com/computersarecool/irreceiver
Author: Willy Nolan
Author-email: contact@interactiondepartment.com
License: MIT
Platform: UNKNOWN
Description-Content-Type: text/markdown

# IRReceiver
*A module to parse the NEC IR remote control protocol in Python*

## Description
This is a fully tested module that creates a parser for the NEC IR remote control protocol.

The NEC protocol is used by many remotes, you can read about it [here](https://www.sbprojects.net/knowledge/ir/nec.php).

**NOTE: There is an example of this sketch that is made for the Raspberry PI.  If you use this library with a Raspberry Pi
it is advised to use `pigpio` as the GPIO library. Even then, the Raspberry Pi does [not have a real time operating system](https://www.socallinuxexpo.org/sites/default/files/presentations/Steven_Doran_SCALE_13x.pdf)
which is needed for better reliability**


## Dependencies
- This project has no external dependencies but the example code does depend on being run on a Raspberry Pi.
- All code follows PEP 8 and is run through [YAPF](https://github.com/google/yapf) before it is committed


## Tested On
- A Raspberry Pi (first generation)
- A Yamaha MRX-90M remote


## To Install
- `pip install irreceiver`


## To Use
- An example file can be found in the `examples` directory.
- Here is a basic example of decoding an list of IR timing pulses:
```python
from irreceiver import NecDecoder
decoder = NecDecoder()
# Create PULSES, a list of IR pulse timings
message = decoder.decode(PULSES)
```


## Project Structure
Directory structure should be clear. All code is in the `irreceiver` directory.


### License

:copyright: Willy Nolan 2020

[MIT License](http://en.wikipedia.org/wiki/MIT_License)


